| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Denial of Service (DoS) vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet. |
| An information disclosure vulnerability in dnsmasq allows remote attackers to bypass source checks via a crafted DNS packet with RFC 7871 client subnet information. |
| A buffer overflow issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.7 and iPadOS 18.7.7, iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4, visionOS 26.4. Parsing a maliciously crafted file may lead to an unexpected app termination. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback
aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not propagate page array emplacement errors as batch errors
When fscrypt is enabled, move_dirty_folio_in_page_array() may fail
because it needs to allocate bounce buffers to store the encrypted
versions of each folio. Each folio beyond the first allocates its bounce
buffer with GFP_NOWAIT. Failures are common (and expected) under this
allocation mode; they should flush (not abort) the batch.
However, ceph_process_folio_batch() uses the same `rc` variable for its
own return code and for capturing the return codes of its routine calls;
failing to reset `rc` back to 0 results in the error being propagated
out to the main writeback loop, which cannot actually tolerate any
errors here: once `ceph_wbc.pages` is allocated, it must be passed to
ceph_submit_write() to be freed. If it survives until the next iteration
(e.g. due to the goto being followed), ceph_allocate_page_array()'s
BUG_ON() will oops the worker.
Note that this failure mode is currently masked due to another bug
(addressed next in this series) that prevents multiple encrypted folios
from being selected for the same write.
For now, just reset `rc` when redirtying the folio to prevent errors in
move_dirty_folio_in_page_array() from propagating. Note that
move_dirty_folio_in_page_array() is careful never to return errors on
the first folio, so there is no need to check for that. After this
change, ceph_process_folio_batch() no longer returns errors; its only
remaining failure indicator is `locked_pages == 0`, which the caller
already handles correctly. |
| RayVentory Scan Engine through 12.6 Update 8 allows attackers to gain privileges if they control the value of the PATH environment variable. NOTE: this is disputed because ability of an attacker to control the environment is a site-specific misconfiguration. |
| Geyser is a bridge between Minecraft: Bedrock Edition and Minecraft: Java Edition. Prior to 2.9.3, a server-side request forgery (SSRF) vulnerability exists in Geyser’s handling of Bedrock player head texture data. By supplying a crafted Base64-encoded skin texture URL via the /give command, an attacker can cause the Minecraft server to issue arbitrary HTTP GET requests to attacker-controlled or internal endpoints. This occurs server-side, without proper URL validation, and can be triggered by a Bedrock client. This vulnerability is fixed in 2.9.3. |
| A memory corruption vulnerability was addressed with improved locking. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. An attacker may be able to cause unexpected app termination. |
| This issue was addressed by adding an additional prompt for user consent. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, visionOS 26.5. An app may be able to access user-sensitive data. |
| A weakness has been identified in D-Link DIR-816 1.10CNB05_R1B011D88210. Affected by this vulnerability is the function sub_445E7C of the file /goform/formDMZ.cgi. This manipulation causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| Fiber is a web framework for Go. Prior to 2.52.12 and 3.1.0, Cross-Site Scripting vulnerability in Go Fiber allows a remote attacker to inject arbitrary HTML/JavaScript by supplying Accept: text/html on any request whose handler passes attacker-influenced data to the AutoFormat() feature. The developer opts into content negotiation by calling AutoFormat(), but does not opt into raw HTML emission for a particular request; Fiber chooses that branch from attacker-controlled Accept. The html branch is the sole outlier in a method whose name (AutoFormat) and symmetrical structure actively telegraph "safe, format-agnostic reply." This vulnerability is fixed in 2.52.12 and 3.1.0. |
| Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to 1.35.5, refresh tokens are not invalidated when the user's security_stamp is rotated by some security-sensitive operations (password change, KDF change, key rotation, email change, org admin password reset, emergency access takeover). This allows an attacker holding a previously obtained refresh token to maintain session access even after the user has taken action to secure their account. This vulnerability is fixed in 1.35.5. |
| barebox version prior to 2026.04.0 contains a denial-of-service vulnerability in ext4 directory parsing in fs/ext4/ext4_common.c where the ext4fs_iterate_dir() function fails to validate that directory entry length values are non-zero. Attackers can supply a malicious ext4 filesystem image with a crafted directory entry containing a direntlen value of 0 to cause an infinite loop during directory listing or path resolution, resulting in the boot process hanging indefinitely. |
| Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to 1.35.5, Vaultwarden allows an unconfirmed organization owner to purge the entire organization vault. The organization invite flow uses a two-step process: accepting an invite transitions membership from Invited to Accepted, and a separate confirmation by an existing owner upgrades it to Confirmed. The POST /api/ciphers/purge endpoint uses plain Headers and only checks that the membership type is Owner without verifying that the membership status is Confirmed. An authenticated user who has been invited as an organization owner and has accepted the invite and has not yet been confirmed can call this endpoint to hard-delete all ciphers and attachments in the organization,
causing immediate organization-wide data loss. This vulnerability is fixed in 1.35.5. |
| A heap-based out-of-bounds read vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. Processing an audio stream in a maliciously crafted media file may terminate the process. |
| Audiobookshelf is a self-hosted audiobook and podcast server. Prior to 2.32.2, the podcast creation endpoint at server/controllers/PodcastController.js accepts a user-controlled file path without sufficient boundary validation to ensure it remains within the intended library directory. This vulnerability is fixed in 2.32.2. |
| Pi-hole is a DNS sinkhole that protects devices from unwanted content without installing any client-side software. From 6.0 to before Core 6.4.2 and FTL 6.6.1, two shell scripts executed as root by systemd (pihole-FTL-prestart.sh and pihole-FTL-poststop.sh) read the files.pid path from this config without validation and use it in privileged file operations (install and rm -f). By writing an arbitrary path into files.pid, an attacker with pihole privilege can cause root to delete and then recreate any file on the system outside the ProtectSystem=full-restricted directories, gaining write access to it. On a default Pi-hole installation this yields local privilege escalation to root via SSH authorized keys manipulation. If /root/.ssh/authorized_keys does not exist (default on fresh installs), only ExecStartPre is required. If the file exists, ExecStopPost deletes it first, and the same restart triggers both hooks in sequence. This vulnerability is fixed in Core 6.4.2 and FTL 6.6.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00). |
| In the Linux kernel, the following vulnerability has been resolved:
dm mpath: Add missing dm_put_device when failing to get scsi dh name
When commit fd81bc5cca8f ("scsi: device_handler: Return error pointer in
scsi_dh_attached_handler_name()") added code to fail parsing the path if
scsi_dh_attached_handler_name() failed with -ENOMEM, it didn't clean up
the reference to the path device that had just been taken. Fix this, and
steamline the error paths of parse_path() a little. |
