| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Melapress Role Editor plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.1.1. This is due to a misconfigured capability check on the 'save_secondary_roles_field' function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to assign themselves additional roles including Administrator. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Drupal Flag allows Cross-Site Scripting (XSS).This issue affects Flag: from 7.X-3.0 through 7.X-3.9. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Drupal Facebook Pixel facebook_pixel allows Stored XSS.This issue affects Facebook Pixel: from 7.X-1.0 through 7.X-1.1. |
| The Video Lessons Manager WordPress plugin before 1.7.2 and Video Lessons Manager Pro WordPress plugin before 3.5.9 do not properly sanitize and escape values when updating their settings, which could allow high privilege users to perform Cross-Site Scripting attacks |
| Cross-Site Request Forgery (CSRF) vulnerability in CreativeMindsSolutions CM On Demand Search And Replace plugin <= 1.3.0 versions. |
| A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
functionfs: fix the open/removal races
ffs_epfile_open() can race with removal, ending up with file->private_data
pointing to freed object.
There is a total count of opened files on functionfs (both ep0 and
dynamic ones) and when it hits zero, dynamic files get removed.
Unfortunately, that removal can happen while another thread is
in ffs_epfile_open(), but has not incremented the count yet.
In that case open will succeed, leaving us with UAF on any subsequent
read() or write().
The root cause is that ffs->opened is misused; atomic_dec_and_test() vs.
atomic_add_return() is not a good idea, when object remains visible all
along.
To untangle that
* serialize openers on ffs->mutex (both for ep0 and for dynamic files)
* have dynamic ones use atomic_inc_not_zero() and fail if we had
zero ->opened; in that case the file we are opening is doomed.
* have the inodes of dynamic files marked on removal (from the
callback of simple_recursive_removal()) - clear ->i_private there.
* have open of dynamic ones verify they hadn't been already removed,
along with checking that state is FFS_ACTIVE. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject narrower access to pointer ctx fields
The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:
r0 = *(u8 *)(r1 + 169);
exit;
With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:
verifier bug: error during ctx access conversion(1)
This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.
The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.
Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e385a ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix use-after-free during router port configuration
The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.
When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 1
$ bridge -d mdb show | grep router
However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:
# ip link set dev dummy1 type bridge_slave mcast_router 0
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):
# ip link del dev dummy1
# ip link add name dummy2 up master br1 type dummy
# ip link set dev dummy2 type bridge_slave mcast_router 2
Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
# ip link add name dummy1 up master br1 type dummy
# bridge vlan add vid 2 dev dummy1
# bridge vlan global set vid 2 dev br1 mcast_snooping 1
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 0
$ bridge vlan global show dev br1 vid 2 | grep router
However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:
# bridge vlan set vid 2 dev dummy1 mcast_router 0
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):
# ip link add name dummy2 up master br1 type dummy
# bridge vlan add vid 2 dev dummy2
# bridge vlan del vid 2 dev dummy1
# bridge vlan set vid 2 dev dummy2 mcast_router 2
Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.
Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).
[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr ffff888004a67328 by task ip/384
[...]
Call Trace:
<TASK>
dump_stack
---truncated--- |
| Dell PowerScale OneFS, versions 9.5.0.0 through 9.5.1.5, versions 9.6.0.0 through 9.7.1.10, versions 9.8.0.0 through 9.10.1.3, versions starting from 9.11.0.0 and prior to 9.13.0.0, contains a Time-of-check Time-of-use (TOCTOU) race condition vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to denial of service. |
| A low-privileged user can bypass account credentials without confirming the user's current authentication state, which may lead to unauthorized privilege escalation. |
| The fix applied in CVE-2025-22228 inadvertently broke the timing attack mitigation implemented in DaoAuthenticationProvider. This can allow attackers to infer valid usernames or other authentication behavior via response-time differences under certain configurations. |
| Cross-Site Request Forgery (CSRF) vulnerability in AA-Team Wordpress Movies Bulk Importer movies importer allows Cross Site Request Forgery.This issue affects Wordpress Movies Bulk Importer: from n/a through <= 1.0. |
| A maliciously crafted HTML payload in a design name, when displayed during the delete confirmation dialog and clicked by a user, can trigger a Stored Cross-site Scripting (XSS) vulnerability in the Autodesk Fusion desktop application. A malicious actor may leverage this vulnerability to read local files or execute arbitrary code in the context of the current process. |
| A maliciously crafted HTML payload, stored in a part’s attribute and clicked by a user, can trigger a Stored Cross-site Scripting (XSS) vulnerability in the Autodesk Fusion desktop application. A malicious actor may leverage this vulnerability to read local files or execute arbitrary code in the context of the current process. |
| A vulnerability in Palantir's Aries service allowed unauthenticated access to log viewing and management functionality on Apollo instances using default configuration. The defect resulted in both authentication and authorization checks being bypassed, potentially allowing any network-accessible client to view system logs and perform operations without valid credentials. No evidence of exploitation was identified during the vulnerability window. |
| The web application does not sufficiently verify inputs that are assumed to be immutable but are actually externally controllable. A low-privileged user can modify the parameters and potentially manipulate account-level privileges. |
| EduSoho versions prior to 22.4.7 contain an arbitrary file read vulnerability in the classroom-course-statistics export functionality. A remote, unauthenticated attacker can supply crafted path traversal sequences in the fileNames[] parameter to read arbitrary files from the server filesystem, including application configuration files such as config/parameters.yml that may contain secrets and database credentials. Exploitation evidence was observed by the Shadowserver Foundation on 2026-01-19 (UTC). |
| A maliciously crafted HTML payload, stored in a component’s description and clicked by a user, can trigger a Stored Cross-site Scripting (XSS) vulnerability in the Autodesk Fusion desktop application. A malicious actor may leverage this vulnerability to read local files or execute arbitrary code in the context of the current process. |
| Dell PowerScale OneFS, versions prior 9.13.0.0, contains an insufficient logging vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to information tampering. |
