| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| go-ipld-prime is an implementation of the InterPlanetary Linked Data (IPLD) spec interfaces, a batteries-included codec implementations of IPLD for CBOR and JSON, and tooling for basic operations on IPLD objects. Prior to 0.23.0, the DAG-CBOR and DAG-JSON decoders recurse on each nested map or list without a depth limit. A payload containing deeply nested collections causes the decoder to recurse once per level, growing the goroutine stack until the Go runtime terminates the process with a fatal stack overflow (distinct from a recoverable panic). This vulnerability is fixed in 0.23.0. |
| A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks. |
| epa4all-client is the Java Client for epa4all / ePA 3.0 in the Telematik Infrastruktur. Prior to 1.2.1, in SignedPublicKeysTrustValidatorImpl.isTrusted(), the ECDSA signature verification at line 45 discards the boolean return value of Signature.verify(). The method performs certificate chain validation, OCSP check, and signature algorithm setup, but never checks whether the signature actually matches. For any structurally valid signature, it returns true. This vulnerability is fixed in 1.2.1. |
| epa4all-client is the Java Client for epa4all / ePA 3.0 in the Telematik Infrastruktur. Prior to 1.2.2, an attacker who can MITM the TLS connection between the client and the IDP (within the TI network) can substitute a forged discovery document. The forged document redirects uri_puk_idp_enc and uri_puk_idp_sig to attacker-controlled URLs. The client then encrypts the SMC-B-signed challenge response to the attacker's encryption key and POSTs it to the attacker's auth endpoint. This captures the signed authentication material. This vulnerability is fixed in 1.2.2. |
| Lumiverse is a full-featured AI chat application. Prior to 0.9.7, consumeNonce() only checks that the module-level variable is set and unexpired. It does not validate any value from the incoming HTTP request or bind the nonce to the admin's session. If the admin's auth.api.signUpEmail() call fails before the before hook fires (e.g. BetterAuth rejects a duplicate email at the validation layer), the nonce is set but never consumed. Any POST /api/auth/sign-up/email request that arrives during the remaining window registers successfully regardless of who sent it. An attacker who can observe or predict when the admin is creating users (must be a dupplicate user) can race the 10-second window to register an unauthorized account. This vulnerability is fixed in 0.9.7. |
| view_component is a framework for building reusable, testable, and encapsulated view components in Ruby on Rails. From 3.0.0 to 4.9.0, the system test entrypoint canonicalizes a user-controlled file path with File.realpath, then checks whether the resolved path starts with the temp directory path. This is not a safe containment check because sibling directories can share the same string prefix. This vulnerability is fixed in 4.9.0. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 6.9.7, an organization admin can escalate their privileges by adding a user from a different organization with higher privileges, to their own organization. This is due to incorrect ACL on userEdit relationAdd. This vulnerability is fixed in 6.9.7. |
| Budibase is an open-source low-code platform. Prior to 3.38.1, the REST datasource integration (packages/server/src/integrations/rest.ts) follows HTTP redirects without re-checking the IP blacklist, allowing an authenticated Builder to access internal services (cloud metadata, databases) by redirecting through an attacker-controlled server. This vulnerability is fixed in 3.38.1. |
| A vulnerability was determined in haojing8312 WorkClaw up to 0.6.4. This affects the function is_dangerous of the file apps/runtime/src-tauri/src/agent/tools/bash.rs of the component Blacklist Handler. Executing a manipulation can lead to os command injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
pqi_report_phys_luns() fails to release the rpl_list buffer when
encountering an unsupported data format or when the allocation for
rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic,
leading to memory leaks.
Consolidate the error handling by adding an out_free_rpl_list label and use
goto statements to ensure rpl_list is consistently freed on failure.
Compile tested only. Issue found using a prototype static analysis tool and
code review. |
| In the Linux kernel, the following vulnerability has been resolved:
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
commit 6d3789d347a7 ("papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()"),
changed the create handle to FD_PREPARE(), but it caused kernel
null-ptr-deref because after call to retain_and_null_ptr(src_info),
src_info is re-used for adding it to the global list.
Getting the following kernel panic in papr_hvpipe_dev_create_handle()
when trying to add src_info to the list.
Kernel attempted to write user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on write at 0x00000000
Faulting instruction address: 0xc0000000001b44a0
Oops: Kernel access of bad area, sig: 11 [#1]
...
Call Trace:
papr_hvpipe_dev_ioctl+0x1f4/0x48c (unreliable)
sys_ioctl+0x528/0x1064
system_call_exception+0x128/0x360
system_call_vectored_common+0x15c/0x2ec
Now, the error handling with FD_PREPARE's file cleanup and __free(kfree) auto
cleanup is getting too convoluted. This is mainly because we need to
ensure only 1 user get the srcID handle. To simplify this, we allocate
prepare the src_info in the beginning and add it to the global list
under a spinlock after checking that no duplicates exist.
This simplify the error handling where if the FD_ADD fails, we can
simply remove the src_info from the list and consume any pending msg in
hvpipe to be cleared, after src_info became visible in the global list. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity-fec: fix reading parity bytes split across blocks (take 3)
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read. |
| Bugsink is a self-hosted error tracking tool. Prior to 2.2.0, Bugsink issue event pages accept a direct event identifier from the URL and, in affected versions, look up that event without also requiring it to belong to the issue in the URL. This is a project-boundary authorization issue: a logged-in user with access to one project can view another project’s event data through an issue they are allowed to access. The affected views include the stacktrace, details, and breadcrumbs pages for an issue event. This vulnerability is fixed in 2.2.0. |
| Kysely is a type-safe TypeScript SQL query builder. From 0.26.0 to 0.28.16, DefaultQueryCompiler.visitJSONPathLeg does not escape JSON-path metacharacters (., [, ], *, **, ?). When attacker-controlled input flows into eb.ref(col, '->$').key(input) or .at(input) — including type-safe code where the JSON column is shaped like Record<string, T> so K extends string is the inferred type — every dot becomes a path-leg separator, letting an attacker traverse from the intended key into sibling and child fields the developer never meant to expose. The result is read access (and, in update statements, write access) to JSON sub-fields outside the intended scope across MySQL, PostgreSQL ->$/->>$, and SQLite. This vulnerability is fixed in 0.28.17. |
| A vulnerability was found in Shenzhen Sixun Software Sixun Shanghui Group Business Management System 10. Affected by this vulnerability is an unknown functionality of the file /api/Dinner/PayConfig. Performing a manipulation of the argument tableno results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. From 2.0.0 to before 3.1.5 and 2.3.11, Himmelblau contained an authentication bypass vulnerability in the Device Authorization Grant (DAG) flow that allowed a user within the same Entra ID domain to obtain a local Unix session as another user by providing their own valid credentials. The vulnerability existed in the token_validate function, which validated domain aliases for legitimate multi-domain scenarios but failed to verify that the local part (username) of the authenticated user's UPN matched the requested account username. The function only compared domains, not the complete usernames. This vulnerability is fixed in 3.1.5 and 2.3.11. |
| A flaw has been found in GNU libredwg up to 0.13.4.8160. This issue affects the function bit_read_RC of the file bits.c of the component Dwgbmp Utility. This manipulation causes heap-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. Patch name: 8f03865f37f5d4ffd616fef802acc980be54d300. Applying a patch is the recommended action to fix this issue. |
| A cross-site scripting (XSS) vulnerability exists in Apache ECharts in the Lines series tooltip rendering logic.
This issue affects Apache ECharts: from before 6.1.0.
In versions prior to 6.1.0, if both Lines series and tooltip are used, and no user-specified tooltip.formatter is provided, and series.data[i].name is specified, raw HTML string series.data[i].name can be rendered through innerHTML sink into tooltip content. Although tooltip is allowed to accept user-provided raw HTML via a custom tooltip.formatter, the built-in tooltip formatters conventionally perform HTML escaping automatically. This case breaks that convention and may unexpectedly lead to script execution when tooltips are displayed.
Users are recommended to upgrade to version 6.1.0 if using the Lines series in this way, which fixes the issue. |
| Default configurations of Apache Shiro have a session fixation vulnerability.
This issue affects Apache Shiro from 1.0 to 2.1.0, and 3.0.0-alpha-1.
Users are recommended to upgrade to version 2.1.1, or 3.0.0-alpha-2 or later, which fixes the issue.
In the affected versions, when a session already exists, it is not invalidated upon successful login, nor is a new session being generated with a new ID. |
| Default configurations of Apache Shiro send sensitive cookies in HTTPS session without 'Secure' attribute.
This issue affects Apache Shiro from 1.0 to 2.1.0, and 3.0.0-alpha-1.
Users are recommended to upgrade to version 2.1.1, or 3.0.0-alpha-2 or later, which fixes the issue.
In the affected versions, Shiro-native session manager, as well as Remember-Me manager sends JSESSIONID and rememberMe cookies without 'secure' attribute by default. |
