| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: restrict SO_ATTACH_FILTER to priv users
This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets
to users with CAP_NET_ADMIN capability.
This blocks potential side-channel attack where an unprivileged application
attaches a filter to leak TCP sequence/acknowledgment numbers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add pskb_may_pull() to skb_gro_receive_list()
skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without
first ensuring the data is in the linear area via pskb_may_pull(). When
the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in
page fragments) while skb_gro_offset is non-zero (after IP+TCP header
parsing). The skb_pull() then decrements skb->len by skb_gro_offset
but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len)
in __skb_pull().
The UDP fraglist GRO path already contains this guard at
udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides
centralized protection for all callers (TCP, UDP, and any future
protocols), and ensures the precondition of skb_pull() is satisfied
before it is called.
On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the
skb is not held as a new GRO head and is instead delivered through the
normal receive path, matching the UDP handling. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ibm: emac: Fix use-after-free during device removal
The driver was using devm_register_netdev() which causes unregister_netdev()
to be deferred until the devres cleanup phase, which runs after emac_remove()
returns. This creates a use-after-free window where:
1. emac_remove() is called, which tears down hardware (cancels work, detaches
modules, unregisters from MAL)
2. emac_remove() returns
3. devres cleanup runs and finally calls unregister_netdev()
During step 3, the network stack might still process packets, triggering
emac_irq(), emac_poll(), or other handlers that access now-freed hardware
resources (dev->emacp, dev->mal, etc.).
Fix this by replacing devm_register_netdev() with manual register_netdev()
and calling unregister_netdev() at the beginning of emac_remove(), before
any hardware teardown. This ensures the network device is fully stopped and
unregistered before hardware resources are released.
The change is safe because:
- dev->ndev is assigned very early in probe (before any error paths that
could bypass emac_remove)
- platform_set_drvdata() is only called after successful registration, so
emac_remove() only runs for fully registered devices
- unregister_netdev() is idempotent and safe to call on any registered device |
| In the Linux kernel, the following vulnerability has been resolved:
netdev: fix double-free in netdev_nl_bind_rx_doit()
Sashiko flags that genlmsg_reply() always consumes the skb.
The error path calls nlmsg_free(rsp) so we can't jump directly
to it. Let's not unbind, just propagate the error to the user.
This is the typical way of handling genlmsg_reply() failures.
They shouldn't happen unless user does something silly like
calling the kernel with an already-full rcvbuf. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: clean the sfp upstream if phy probing fails
Sashiko reported that we don't call sfp_bus_del_upstream() in the probe
failure path, so let's add it, otherwise the sfp-bus is left with a
dangling 'upstream' field, that may be used later on during SFP events.
This issue existed before the generic phylib sfp support, back when
drivers were calling phy_sfp_probe themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: don't try to setup PHY-driven SFP cages when using genphy
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure
In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()
returns false (e.g. XDPSQ is full), the function returns without
unmapping the DMA address or freeing the xdp_frame allocated by
xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on
success, so the completion path cannot recover these entries.
With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind:
DMA-API: pci 0000:08:00.0: device driver has pending DMA
allocations while released from device [count=1116]
One of leaked entries details: [device address=0x000000010ffd7028]
[size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy]
WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180
...
DMA-API: Mapped at:
debug_dma_map_phys+0x4b/0xd0
dma_map_phys+0xfd/0x2d0
mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core]
mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core]
mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]
Add the missing unmap + xdp_return_frame, matching the cleanup already
done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,
so no per-frag unmap is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix possible kfree_skb of ERR_PTR
After the patch in the "Fixes" tag, the allocation of the "reply" skb
can happen either before or after locking the ovs_mutex.
However, error cleanups still follow the classical reversed order,
assuming "reply" is allocated before locking: it is freed after unlocking.
If "reply" allocation happens after locking the mutex and it fails,
"reply" is left with an ERR_PTR, and execution jumps to the correspondent
cleanup stage which will try to free an invalid pointer.
Fix this by setting the pointer to NULL after having saved its error
value. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: guard timestamp cmsgs to real error queue skbs
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: avoid leaking percpu counter pointers
The native and compat get-entries paths copy the fixed rule entry header
from the kernelized rule blob to userspace before overwriting the entry's
counter fields with a sanitized counter snapshot.
On SMP kernels, entry->counters.pcnt contains the percpu allocation
address used by x_tables rule counters. A caller can provide a userspace
buffer that faults during the initial fixed-header copy after pcnt has
been copied but before the later sanitized counter copy runs. The syscall
then returns -EFAULT while leaving the raw percpu pointer in userspace.
Copy only the fixed entry prefix before counters from the kernelized rule
blob, then copy the sanitized counter snapshot into the counter field.
Apply this ordering to the IPv4, IPv6, and ARP native and compat
get-entries implementations so a fault cannot expose the internal percpu
counter pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
nft_exthdr_init() passes user-controlled priv->len to
nft_parse_register_store(), which marks that many bytes in the
register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT
is set, the eval paths write only 1 byte (nft_reg_store8) or
4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,
registers beyond the first are never written, retaining
uninitialized stack data from nft_regs.
Bail out if userspace requests too much data when F_PRESENT is set. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: sync RX data at the hardware packet offset
mvpp2 programs the RX queue packet offset, so hardware writes received
data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at
dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the
unused headroom and misses the same number of bytes at the packet tail.
On non-coherent DMA systems this can leave the CPU reading stale cache
contents for the end of the received frame.
Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range
offset so the sync covers the Marvell header and packet data actually
written by hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: limit XDP frame size to the RX buffer
mvpp2 has short and long BM pools, and short pool buffers can be smaller
than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with
PAGE_SIZE as frame size.
XDP helpers use frame_sz to validate tail growth and to derive the hard
end of the data area. Advertising PAGE_SIZE for short buffers can let
bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting
memory or later tripping skb tailroom checks.
Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches
the actual buffer backing the packet. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: refill RX buffers before XDP or skb use
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
NFT_META_BRI_IIFHWADDR declares its destination register with
len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to
two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does
memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and
leaving the upper 2 bytes of the second register as uninitialised
nft_do_chain() stack. A downstream load of that register span leaks
those stale bytes to userspace.
Zero the second register before the memcpy so the full declared span is
written. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend
Existing advertising instances can already hold the maximum extended
advertising payload. When hci_adv_bcast_annoucement() prepends the
Broadcast Announcement service data to that payload, the combined data
may no longer fit in the temporary buffer used to rebuild the
advertising data.
Reject that case before copying the existing payload and report the
failure through the device log. This keeps the existing advertising
data intact and avoids overrunning the temporary buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds checks for firmware log indices
Add validation that read and write indices in the firmware log buffer
are within valid bounds (< data_size) before using them. If
out-of-bounds indices are encountered (from firmware), clamp them to
safe values instead of proceeding with invalid offsets.
This prevents potential out-of-bounds buffer access when firmware
supplies invalid log indices. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-rsu: Fix NULL deref on rsu_send_msg() timeout in probe
rsu_send_msg() can return -ETIMEDOUT when
wait_for_completion_interruptible_timeout() fires while the SMC call is still
pending. In stratix10_rsu_probe(), the error paths for COMMAND_RSU_DCMF_VERSION,
COMMAND_RSU_DCMF_STATUS, COMMAND_RSU_MAX_RETRY and COMMAND_RSU_GET_SPT_TABLE
call stratix10_svc_free_channel() - which sets chan->scl to NULL - but then
fall through and queue the next request on the same channel. The next svc
kthread that runs will dereference pdata->chan->scl in its receive callback
path, triggering a NULL pointer dereference identical to the one fixed by
commit c45f7263100c ("firmware: stratix10-rsu: Fix NULL pointer dereference
when RSU is disabled") for the COMMAND_RSU_STATUS path.
Apply the same cleanup pattern to the remaining failure paths: remove the
async client, free the channel, and return early so no further messages are
queued on a channel whose scl has been cleared.
While at it, clean up stratix10_rsu_probe() in two ways without changing
behavior:
- Drop redundant zero-initialization of fields already cleared by
devm_kzalloc(): client.receive_cb, status.* and spt0/1_address
(INVALID_SPT_ADDRESS is 0x0).
- Replace five identical 3-line error-cleanup blocks
(stratix10_svc_remove_async_client() + stratix10_svc_free_channel() +
return ret) with goto labels (remove_async_client, free_channel),
matching the standard kernel resource-unwinding pattern and making it
easier to extend the probe sequence without forgetting matching
cleanup.
Also move init_completion() next to mutex_init() so sync-primitive
initialization is grouped before anything that could trigger a
callback.
---
v2: Add a minor clean-up of the function stratix10_rsu_probe() to have a
centralize exit for all the rsu_send_async_msg() and rsu_send_msg(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add buffer overflow check in MS get_info_ioctl
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy. |
