| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp
Patch series "mm/damon/core: validate damos_quota_goal->nid".
node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The
node id is used for si_meminfo_node() and NODE_DATA() without proper
validation. As a result, privileged users can trigger an out of bounds
memory access using DAMON_SYSFS. Fix the issues.
The issue was originally reported [1] with a fix by another author. The
original author announced [2] that they will stop working including the
fix that was still in the review stage. Hence I'm restarting this.
This patch (of 2):
Users can set damos_quota_goal->nid with arbitrary value for
node_mem_{used,free}_bp. But DAMON core is using those for
si_meminfo_node() without the validation of the value. This can result in
out of bounds memory access. The issue can actually triggered using DAMON
user-space tool (damo), like below.
$ sudo ./damo start --damos_action stat \
--damos_quota_goal node_mem_used_bp 50% -1 \
--damos_quota_interval 1s
$ sudo dmesg
[...]
[ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
Fix this issue by adding the validation of the given node. If an invalid
node id is given, it returns 0% for used memory ratio, and 100% for free
memory ratio. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: return error when node already exists in hfs_bnode_create
When hfs_bnode_create() finds that a node is already hashed (which should
not happen in normal operation), it currently returns the existing node
without incrementing its reference count. This causes a reference count
inconsistency that leads to a kernel panic when the node is later freed
in hfs_bnode_put():
kernel BUG at fs/hfsplus/bnode.c:676!
BUG_ON(!atomic_read(&node->refcnt))
This scenario can occur when hfs_bmap_alloc() attempts to allocate a node
that is already in use (e.g., when node 0's bitmap bit is incorrectly
unset), or due to filesystem corruption.
Returning an existing node from a create path is not normal operation.
Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's
already hashed. This properly signals the error condition to callers,
which already check for IS_ERR() return values. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuidle: Skip governor when only one idle state is available
On certain platforms (PowerNV systems without a power-mgt DT node),
cpuidle may register only a single idle state. In cases where that
single state is a polling state (state 0), the ladder governor may
incorrectly treat state 1 as the first usable state and pass an
out-of-bounds index. This can lead to a NULL enter callback being
invoked, ultimately resulting in a system crash.
[ 13.342636] cpuidle-powernv : Only Snooze is available
[ 13.351854] Faulting instruction address: 0x00000000
[ 13.376489] NIP [0000000000000000] 0x0
[ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668
Fix this by adding a bail-out in cpuidle_select() that returns state 0
directly when state_count <= 1, bypassing the governor and keeping the
tick running. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix use-after-free on unbind
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
Take another reference before deregistering the controller so that the
driver data is not freed until the driver is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
If device_add(&sdkp->disk_dev) fails, put_device() runs
scsi_disk_release(), which frees the scsi_disk but leaves the gendisk
referenced. The device_add_disk() error path in sd_probe() calls
put_disk(gd); call put_disk(gd) here to mirror that cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
Fix two bugs in pt5161l_read_block_data():
1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24],
but i2c_smbus_read_block_data() can return up to
I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into
the caller's buffer before the return value can be checked, so
the post-read length validation does not prevent a stack overrun
if a device returns more than 24 bytes. Resize the buffer to
I2C_SMBUS_BLOCK_MAX.
2. Unexpected positive return on length mismatch: When all three
retries are exhausted because the device returns data with an
unexpected length, i2c_smbus_read_block_data() returns a positive
byte count. The function returns this directly, and callers treat
any non-negative return as success, processing stale or incomplete
buffer contents. Return -EIO when retries are exhausted with a
positive return value, preserving the negative error code on I2C
failure. |
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. Microsoft UFO tagged releases up to and including v3.0.0 contain an OS command injection vulnerability in the shell action replay path. In affected releases, ShellReceiver.run_shell() passes a command string from action parameters directly to subprocess.Popen() with shell=True and executable=powershell.exe. The same shell-execution behavior is also reachable through ShellReceiver.execute_command(). The shell receiver is invoked by action classes such as RunShellCommand.execute() and ExecuteCommand.execute(), which forward stored action parameters to the shell receiver. Because UFO stores planned and executed actions in per-session JSON records, an attacker who can write or modify a session/action JSON file can plant a shell action. When the session is resumed or replayed, UFO executes the attacker's command as the UFO process user. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Fix NULL pointer dereference in interrupt trigger path
Add validation to ensure MSI is configured before accessing cdx_irqs
array in vfio_cdx_set_msi_trigger(). Without this check, userspace
can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS
with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before
ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD.
The vfio_cdx_msi_enable() function allocates the cdx_irqs array and
sets config_msi to 1 only when called through the EVENTFD path. The
trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been
done, but there was no enforcement of this call ordering.
This matches the protection used in the PCI VFIO driver where
vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: add buffer boundary checks to run_unpack()
run_unpack() checks `run_buf < run_last` at the top of the while loop
but then reads size_size and offset_size bytes via run_unpack_s64()
without verifying they fit within the remaining buffer. A crafted NTFS
image with truncated run data in an MFT attribute triggers an OOB heap
read of up to 15 bytes when the filesystem is mounted.
Add boundary checks before each run_unpack_s64() call to ensure the
declared field size does not exceed the remaining buffer.
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
rbd: fix null-ptr-deref when device_add_disk() fails
do_rbd_add() publishes the device with device_add() before calling
device_add_disk(). If device_add_disk() fails after device_add()
succeeds, the error path calls rbd_free_disk() directly and then later
falls through to rbd_dev_device_release(), which calls rbd_free_disk()
again. This double teardown can leave blk-mq cleanup operating on
invalid state and trigger a null-ptr-deref in
__blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set().
Fix this by following the normal remove ordering: call device_del()
before rbd_dev_device_release() when device_add_disk() fails after
device_add(). That keeps the teardown sequence consistent and avoids
re-entering disk cleanup through the wrong path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.
We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64
guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer
confines failslab injections to the __add_disk() range and injects
fail-nth while mapping an RBD image through
/sys/bus/rbd/add_single_major.
On the unpatched kernel, fail-nth=4 reliably triggered the fault:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240
Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00
RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246
RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4
RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b
R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000
R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004
FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0
PKRU: 55555554
Call Trace:
<TASK>
blk_mq_free_tag_set+0x77/0x460
do_rbd_add+0x1446/0x2b80
? __pfx_do_rbd_add+0x10/0x10
? lock_acquire+0x18c/0x300
? find_held_lock+0x2b/0x80
? sysfs_file_kobj+0xb6/0x1b0
? __pfx_sysfs_kf_write+0x10/0x10
kernfs_fop_write_iter+0x2f4/0x4a0
vfs_write+0x98e/0x1000
? expand_files+0x51f/0x850
? __pfx_vfs_write+0x10/0x10
ksys_write+0xf2/0x1d0
? __pfx_ksys_write+0x10/0x10
do_syscall_64+0x115/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0fbea15907
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907
RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001
RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141
R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058
R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004
</TASK>
With this fix applied, rerunning the reproducer over fail-nth=1..256
yields no KASAN reports.
[ idryomov: rename err_out_device_del -> err_out_device ] |
| In the Linux kernel, the following vulnerability has been resolved:
zram: do not forget to endio for partial discard requests
As reported by Qu Wenruo and Avinesh Kumar, the following
getconf PAGESIZE
65536
blkdiscard -p 4k /dev/zram0
takes literally forever to complete. zram doesn't support partial
discards and just returns immediately w/o doing any discard work in such
cases. The problem is that we forget to endio on our way out, so
blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to
end_bio label, which does bio_endio(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: take vmap_purge_lock in shrinker
decay_va_pool_node() can be invoked concurrently from two paths:
__purge_vmap_area_lazy() when pools are being purged, and the shrinker via
vmap_node_shrink_scan().
However, decay_va_pool_node() is not safe to run concurrently, and the
shrinker path currently lacks serialization, leading to races and possible
leaks.
Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker
path to ensure serialization with purge users. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access
The bounds check for the next xattr entry in check_xattrs() uses
(void *)next >= end, which allows next to point within sizeof(u32)
bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4
bytes via *(__u32 *)(entry), which can overrun the valid xattr region.
For example, if next lands at end - 1, the check passes since
next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1,
accessing 3 bytes beyond the valid region.
Fix this by changing the check to (void *)next + sizeof(u32) > end,
ensuring there is always enough space for the IS_LAST_ENTRY() read
on the subsequent iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: afs: revert mmap_prepare() change
Partially reverts commit 9d5403b1036c ("fs: convert most other
generic_file_*mmap() users to .mmap_prepare()").
This is because the .mmap invocation establishes a refcount, but
.mmap_prepare is called at a point where a merge or an allocation failure
might happen after the call, which would leak the refcount increment.
Functionality is being added to permit the use of .mmap_prepare in this
case, but in the interim, we need to fix this. |
| Jenkins LDAP Plugin 807.v7d7de30930cf and earlier deserializes data from LDAP referrals without validation. |
| Jenkins Active Directory Plugin 2.41 and earlier follows LDAP referrals by default. |
| Jenkins Active Directory Plugin 2.41 and earlier deserializes data from LDAP referrals without validation. |
| Jenkins AppSpider Plugin 1.0.17 and earlier does not perform a permission check in a method implementing form validation, allowing attackers with Overall/Read permission to connect to an attacker-specified URL. |
| Jenkins Bitbucket OAuth Plugin 0.17 and earlier does not restrict the redirect URL after login, allowing attackers to perform phishing attacks. |
