| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/pageattr: Propagate return value from __change_memory_common
The rodata=on security measure requires that any code path which does
vmalloc -> set_memory_ro/set_memory_rox must protect the linear map alias
too. Therefore, if such a call fails, we must abort set_memory_* and caller
must take appropriate action; currently we are suppressing the error, and
there is a real chance of such an error arising post commit a166563e7ec3
("arm64: mm: support large block mapping when rodata=full"). Therefore,
propagate any error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix handling of disconnected directories
Disconnected files or directories can appear when they are visible and
opened from a bind mount, but have been renamed or moved from the source
of the bind mount in a way that makes them inaccessible from the mount
point (i.e. out of scope).
Previously, access rights tied to files or directories opened through a
disconnected directory were collected by walking the related hierarchy
down to the root of the filesystem, without taking into account the
mount point because it couldn't be found. This could lead to
inconsistent access results, potential access right widening, and
hard-to-debug renames, especially since such paths cannot be printed.
For a sandboxed task to create a disconnected directory, it needs to
have write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) to
the underlying source of the bind mount, and read access to the related
mount point. Because a sandboxed task cannot acquire more access
rights than those defined by its Landlock domain, this could lead to
inconsistent access rights due to missing permissions that should be
inherited from the mount point hierarchy, while inheriting permissions
from the filesystem hierarchy hidden by this mount point instead.
Landlock now handles files and directories opened from disconnected
directories by taking into account the filesystem hierarchy when the
mount point is not found in the hierarchy walk, and also always taking
into account the mount point from which these disconnected directories
were opened. This ensures that a rename is not allowed if it would
widen access rights [1].
The rationale is that, even if disconnected hierarchies might not be
visible or accessible to a sandboxed task, relying on the collected
access rights from them improves the guarantee that access rights will
not be widened during a rename because of the access right comparison
between the source and the destination (see LANDLOCK_ACCESS_FS_REFER).
It may look like this would grant more access on disconnected files and
directories, but the security policies are always enforced for all the
evaluated hierarchies. This new behavior should be less surprising to
users and safer from an access control perspective.
Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() and
fix the related comment.
Because opened files have their access rights stored in the related file
security properties, there is no impact for disconnected or unlinked
files. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Prevent potential UAF in group creation
This commit prevents the possibility of a use after free issue in the
GROUP_CREATE ioctl function, which arose as pointer to the group is
accessed in that ioctl function after storing it in the Xarray.
A malicious userspace can second guess the handle of a group and try
to call GROUP_DESTROY ioctl from another thread around the same time
as GROUP_CREATE ioctl.
To prevent the use after free exploit, this commit uses a mark on an
entry of group pool Xarray which is added just before returning from
the GROUP_CREATE ioctl function. The mark is checked for all ioctls
that specify the group handle and so userspace won't be abe to delete
a group that isn't marked yet.
v2: Add R-bs and fixes tags |
| A Use of Uninitialized Variable vulnerability exists in Open Design Alliance Drawings SDK static versions (mt) before 2026.12. Static object `COdaMfcAppApp theApp` may access `OdString::kEmpty` before its initialization. Due to undefined initialization order of static objects across translation units (Static Initialization Order Fiasco), the application accesses uninitialized memory. This results in application crash on startup, causing denial of service. Due to undefined behavior, memory corruption and potential arbitrary code execution cannot be ruled out in specific exploitation scenarios. |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub. Prior to versions 1.6.13, 1.7.14, 1.8.15, and 1.9.2, a Regular Expression Denial of Service (ReDoS) vulnerability exists in Fedify's document loader. The HTML parsing regex at packages/fedify/src/runtime/docloader.ts:259 contains nested quantifiers that cause catastrophic backtracking when processing maliciously crafted HTML responses. This issue has been patched in versions 1.6.13, 1.7.14, 1.8.15, and 1.9.2. |
| wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 694c954, contain a stack-based buffer overflow vulnerability in the function kiss_rec_byte() located in src/kiss_frame.c. When processing crafted KISS frames that reach the maximum allowed frame length (MAX_KISS_LEN), the function appends a terminating FEND byte without reserving sufficient space in the stack buffer. This results in an out-of-bounds write followed by an out-of-bounds read during the subsequent call to kiss_unwrap(), leading to stack memory corruption or application crashes. This vulnerability may allow remote unauthenticated attackers to trigger a denial-of-service condition. |
| wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 3658a87, contain a reachable assertion vulnerability in the APRS MIC-E decoder function aprs_mic_e() located in src/decode_aprs.c. When processing a specially crafted AX.25 frame containing a MIC-E message with an empty or truncated comment field, the application triggers an unhandled assertion checking for a non-empty comment. This assertion failure causes immediate process termination, allowing a remote, unauthenticated attacker to cause a denial of service by sending malformed APRS traffic. |
| Zillya Total Security 3.0.2367.0 contains a privilege escalation vulnerability that allows low-privileged users to copy files to unauthorized system locations using the quarantine module. Attackers can leverage symbolic link techniques to restore quarantined files to restricted directories, potentially enabling system-level access through techniques like DLL hijacking. |
| Orangescrum 1.8.0 contains a privilege escalation vulnerability that allows authenticated users to take over other project-assigned accounts by manipulating session cookies. Attackers can extract the victim's unique ID from the page source and replace their own session cookie to gain unauthorized access to another user's account. |
| Improper input handling in /Grocery/search_products_itname.php inPuneethReddyHC event-management 1.0 permits SQL injection via the sitem_name POST parameter. Crafted payloads can alter query logic and disclose database contents. Exploitation may result in sensitive data disclosure and backend compromise. |
| Orangescrum 1.8.0 contains an authenticated SQL injection vulnerability that allows authorized users to manipulate database queries through multiple vulnerable parameters. Attackers can inject malicious SQL code into parameters like old_project_id, project_id, uuid, and uniqid to potentially extract or modify database information. |
| CMSimple 5.2 contains a stored cross-site scripting vulnerability in the Filebrowser External input field that allows attackers to inject malicious JavaScript. Attackers can place unfiltered JavaScript code that executes when users click on Page or Files tabs, enabling persistent script injection. |
| CMSimple 5.4 contains an authenticated remote code execution vulnerability that allows logged-in attackers to inject malicious PHP code into template files. Attackers can exploit the template editing functionality by crafting a reverse shell payload and saving it through the template editing endpoint with a valid CSRF token. |
| Zucchetti Axess CLOKI Access Control 1.64 contains a cross-site request forgery vulnerability that allows attackers to manipulate access control settings without user interaction. Attackers can craft malicious web pages with hidden forms to disable or modify access control parameters by tricking authenticated users into loading the page. |
| CMSimple 5.4 contains a cross-site scripting vulnerability that allows attackers to bypass input filtering by using HTML to Unicode encoding. Attackers can inject malicious scripts by encoding payloads like ')-alert(1)// and execute arbitrary JavaScript when victims interact with delete buttons. |
| Cadmium CMS v.0.4.9 has a background arbitrary file upload vulnerability in /admin/content/filemanager/uploads. |
| CSZ CMS 1.2.7 contains a persistent cross-site scripting vulnerability that allows unauthorized users to embed malicious JavaScript in private messages. Attackers can send messages with script payloads in the user-agent header, which will execute when an admin views the message in the backend dashboard. |
| CMSimple_XH 1.7.4 contains an authenticated remote code execution vulnerability in the content editing functionality that allows administrative users to upload malicious PHP files. Attackers with valid credentials can exploit the CSRF token mechanism to create a PHP shell file that enables arbitrary command execution on the server. |
| CMSimple 5.4 contains an authenticated local file inclusion vulnerability that allows remote attackers to manipulate PHP session files and execute arbitrary code. Attackers can leverage the vulnerability by changing the functions file path and uploading malicious PHP code through session file upload mechanisms. |
| A command injection vulnerability in the me.connectify.SMJobBlessHelper XPC service of Speedify VPN up to v15.0.0 allows attackers to execute arbitrary commands with root-level privileges. |
