| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Denial of Service (DoS) vulnerability was discovered in the /api/v1/boards/{board_id} endpoint of invoke-ai/invokeai version v5.0.2. This vulnerability occurs when an excessively large payload is sent in the board_name field during a PATCH request. By sending a large payload, the UI becomes unresponsive, rendering it impossible for users to interact with or manage the affected board. Additionally, the option to delete the board becomes inaccessible, amplifying the severity of the issue. |
| A vulnerability in the Device Analytics action frame processing of Cisco Wireless Access Point (AP) Software could allow an unauthenticated, adjacent attacker to inject wireless 802.11 action frames with arbitrary information.
This vulnerability is due to insufficient verification checks of incoming 802.11 action frames. An attacker could exploit this vulnerability by sending 802.11 Device Analytics action frames with arbitrary parameters. A successful exploit could allow the attacker to inject Device Analytics action frames with arbitrary information, which could modify the Device Analytics data of valid wireless clients that are connected to the same wireless controller. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: stricter state check in mptcp_worker
As reported by Christoph, the mptcp protocol can run the
worker when the relevant msk socket is in an unexpected state:
connect()
// incoming reset + fastclose
// the mptcp worker is scheduled
mptcp_disconnect()
// msk is now CLOSED
listen()
mptcp_worker()
Leading to the following splat:
divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018
RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293
RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004
RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000
R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_select_window net/ipv4/tcp_output.c:262 [inline]
__tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459
mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline]
mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705
process_one_work+0x3bd/0x950 kernel/workqueue.c:2390
worker_thread+0x5b/0x610 kernel/workqueue.c:2537
kthread+0x138/0x170 kernel/kthread.c:376
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
This change addresses the issue explicitly checking for bad states
before running the mptcp worker. |
| A vulnerability classified as critical has been found in Jinher Network Collaborative Management Platform 金和数字化智能办公平台 1.0. Affected is an unknown function of the file /C6/JHSoft.Web.AcceptAip/AcceptShow.aspx/. The manipulation of the argument id leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in local API server of DestinyECM solution(versions described below) which is developed and maintained by Cyberdigm may allow Cross-Site Request Forgery (CSRF) attack, which probabilistically enables JSON Hijacking (aka JavaScript Hijacking) via forgery web page.* Due to product customization, version information may differ from the following version description. For further inquiries, please contact the vendor. |
| In Jasper 4.2.2, the jpc_streamlist_remove function in src/libjasper/jpc/jpc_dec.c:2407 has an assertion failure vulnerability, allowing attackers to cause a denial of service attack through a specific image file. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle case when repair happens with dev-replace
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device. |
| A flaw was found in Ansible-Core. This vulnerability allows attackers to bypass unsafe content protections using the hostvars object to reference and execute templated content. This issue can lead to arbitrary code execution if remote data or module outputs are improperly templated within playbooks. |
| The Tumult Hype Animations plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the hypeanimations_panel() function in all versions up to, and including, 1.9.15. This makes it possible for authenticated attackers, with Author-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| The WP Log Viewer plugin for WordPress is vulnerable to unauthorized use of functionality due to a missing capability check on several AJAX actions in all versions up to, and including, 1.2.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to access logs, update plugin-related user settings and general plugin settings. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in brainvireinfo Dynamic URL SEO dynamic-url-seo allows Reflected XSS.This issue affects Dynamic URL SEO: from n/a through <= 1.0. |
| The Support SVG – Upload svg files in wordpress without hassle plugin for WordPress is vulnerable to Stored Cross-Site Scripting via REST API SVG File uploads in all versions up to, and including, 1.1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file. |
| The SVG Block plugin for WordPress is vulnerable to Stored Cross-Site Scripting via REST API SVG File uploads in all versions up to, and including, 1.1.24 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file. |
| A Stored Cross-Site Scripting (XSS) vulnerability has been found in
Koibox for versions prior to e8cbce2. This vulnerability allows an
authenticated attacker to upload an image containing malicious
JavaScript code as profile picture in the
'/es/dashboard/clientes/ficha/' endpoint |
| Paperless-ngx is a document management system that transforms physical documents into a searchable online archive. Starting in version 2.5.0 and prior to version 2.8.6, remote user authentication allows API access even if API access is explicitly disabled. Version 2.8.6 contains a patchc for the issue. |
| wolfictl is a command line tool for working with Wolfi. A git authentication issue in versions prior to 0.16.10 allows a local user’s GitHub token to be sent to remote servers other than `github.com`. Most git-dependent functionality in wolfictl relies on its own `git` package, which contains centralized logic for implementing interactions with git repositories. Some of this functionality requires authentication in order to access private repositories. A central function `GetGitAuth` looks for a GitHub token in the environment variable `GITHUB_TOKEN` and returns it as an HTTP basic auth object to be used with the `github.com/go-git/go-git/v5` library. Most callers (direct or indirect) of `GetGitAuth` use the token to authenticate to github.com only; however, in some cases callers were passing this authentication without checking that the remote git repository was hosted on github.com. This behavior has existed in one form or another since commit 0d06e1578300327c212dda26a5ab31d09352b9d0 - committed January 25, 2023. This impacts anyone who ran the `wolfictl check update` commands with a Melange configuration that included a `git-checkout` directive step that referenced a git repository not hosted on github.com. This also impacts anyone who ran `wolfictl update <url>` with a remote URL outside of github.com. Additionally, these subcommands must have run with the `GITHUB_TOKEN` environment variable set to a valid GitHub token. Users should upgrade to version 0.16.10 to receive a patch. |
| The Clone plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 2.4.6 via deserialization of untrusted input in the 'recursive_unserialized_replace' function. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. |
| The The Grid Plus – Unlimited grid layout plugin for WordPress is vulnerable to arbitrary shortcode execution via grid_plus_load_by_category AJAX action in all versions up to, and including, 1.3.5. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: prevent leak of lsm program after failed attach
In [0], we added the ability to bpf_prog_attach LSM programs to cgroups,
but in our validation to make sure the prog is meant to be attached to
BPF_LSM_CGROUP, we return too early if the check fails. This results in
lack of decrementing prog's refcnt (through bpf_prog_put)
leaving the LSM program alive past the point of the expected lifecycle.
This fix allows for the decrement to take place.
[0] https://lore.kernel.org/all/20220628174314.1216643-4-sdf@google.com/ |
