| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: sync read disk super and set block size
When the user performs a btrfs mount, the block device is not set
correctly. The user sets the block size of the block device to 0x4000
by executing the BLKBSZSET command.
Since the block size change also changes the mapping->flags value, this
further affects the result of the mapping_min_folio_order() calculation.
Let's analyze the following two scenarios:
Scenario 1: Without executing the BLKBSZSET command, the block size is
0x1000, and mapping_min_folio_order() returns 0;
Scenario 2: After executing the BLKBSZSET command, the block size is
0x4000, and mapping_min_folio_order() returns 2.
do_read_cache_folio() allocates a folio before the BLKBSZSET command
is executed. This results in the allocated folio having an order value
of 0. Later, after BLKBSZSET is executed, the block size increases to
0x4000, and the mapping_min_folio_order() calculation result becomes 2.
This leads to two undesirable consequences:
1. filemap_add_folio() triggers a VM_BUG_ON_FOLIO(folio_order(folio) <
mapping_min_folio_order(mapping)) assertion.
2. The syzbot report [1] shows a null pointer dereference in
create_empty_buffers() due to a buffer head allocation failure.
Synchronization should be established based on the inode between the
BLKBSZSET command and read cache page to prevent inconsistencies in
block size or mapping flags before and after folio allocation.
[1]
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:create_empty_buffers+0x4d/0x480 fs/buffer.c:1694
Call Trace:
folio_create_buffers+0x109/0x150 fs/buffer.c:1802
block_read_full_folio+0x14c/0x850 fs/buffer.c:2403
filemap_read_folio+0xc8/0x2a0 mm/filemap.c:2496
do_read_cache_folio+0x266/0x5c0 mm/filemap.c:4096
do_read_cache_page mm/filemap.c:4162 [inline]
read_cache_page_gfp+0x29/0x120 mm/filemap.c:4195
btrfs_read_disk_super+0x192/0x500 fs/btrfs/volumes.c:1367 |
| In the Linux kernel, the following vulnerability has been resolved:
mm, shmem: prevent infinite loop on truncate race
When truncating a large swap entry, shmem_free_swap() returns 0 when the
entry's index doesn't match the given index due to lookup alignment. The
failure fallback path checks if the entry crosses the end border and
aborts when it happens, so truncate won't erase an unexpected entry or
range. But one scenario was ignored.
When `index` points to the middle of a large swap entry, and the large
swap entry doesn't go across the end border, find_get_entries() will
return that large swap entry as the first item in the batch with
`indices[0]` equal to `index`. The entry's base index will be smaller
than `indices[0]`, so shmem_free_swap() will fail and return 0 due to the
"base < index" check. The code will then call shmem_confirm_swap(), get
the order, check if it crosses the END boundary (which it doesn't), and
retry with the same index.
The next iteration will find the same entry again at the same index with
same indices, leading to an infinite loop.
Fix this by retrying with a round-down index, and abort if the index is
smaller than the truncate range. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/481
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 481 Comm: rpcbind Not tainted 6.19.0-rc7-next-20260130-yocto-standard+ #35 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0x98
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x54
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Please note: To reproduce this issue, I manually reverted the changes to
am335x-bone-common.dtsi from commit c477358e66a3 ("ARM: dts: am335x-bone:
switch to new cpsw switch drv") in order to revert to the legacy cpsw
driver. |
| A vulnerability has been found in kalcaddle kodbox up to 1.64.05. The impacted element is the function run of the file plugins/fileThumb/lib/VideoResize.class.php of the component Media File Preview Plugin. Such manipulation of the argument localFile leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The EventPrime plugin for WordPress is vulnerable to unauthorized image file upload in all versions up to, and including, 4.2.8.4. This is due to the plugin registering the upload_file_media AJAX action as publicly accessible (nopriv-enabled) without implementing any authentication, authorization, or nonce verification despite a nonce being created. This makes it possible for unauthenticated attackers to upload image files to the WordPress uploads directory and create Media Library attachments via the ep_upload_file_media endpoint. |
| The Spam protection, Anti-Spam, FireWall by CleanTalk plugin for WordPress is vulnerable to unauthorized Arbitrary Plugin Installation due to an authorization bypass via reverse DNS (PTR record) spoofing on the 'checkWithoutToken' function in all versions up to, and including, 6.71. This makes it possible for unauthenticated attackers to install and activate arbitrary plugins which can be leveraged to achieve remote code execution if another vulnerable plugin is installed and activated. Note: This is only exploitable on sites with an invalid API key. |
| There is a misconfiguration vulnerability inside the Infotainment ECU manufactured by BOSCH. The vulnerability happens during the startup phase of a specific systemd service, and as a result, the following developer features will be activated: the disabled firewall and the launched SSH server.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| The system suffers from the absence of a kernel module signature verification. If an attacker can execute commands on behalf of root user (due to additional vulnerabilities), then he/she is also able to load custom kernel modules to the kernel space and execute code in the kernel context. Such a flaw can lead to taking control over the entire system.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| An issue in the code-runner.executorMap setting of Visual Studio Code Extensions Code Runner v0.12.2 allows attackers to execute arbitrary code when opening a crafted workspace. |
| SQL injection vulnerability (SQLi) in Clicldeu SaaS, specifically in the generation of reports, which occurs when a previously authenticated remote attacker executes a malicious payload in the URL generated after downloading the student's report card in the ‘Day-to-day’ section from the mobile application.
In the URL of the generated PDF, the session token used does not expire, so it remains valid for days after its generation, and unusual characters can be entered after the ‘id_alu’ parameter, resulting in two types of SQLi: boolean-based blind and time-based blind. Exploiting this vulnerability could allow an attacker to access confidential information in the database. |
| A Reflected Cross-site Scripting (XSS) vulnerability affecting ENOVIAvpm Web Access from ENOVIAvpm Version 1 Release 16 through ENOVIAvpm Version 1 Release 19 allows an attacker to execute arbitrary script code in user's browser session. |
| The Forminator Forms – Contact Form, Payment Form & Custom Form Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the form_name parameter in all versions up to, and including, 1.50.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The plugin allows admins to give form management permissions to lower level users, which could make this exploitable by users such as subscribers. |
| The WowRevenue plugin for WordPress is vulnerable to unauthorized plugin installation due to a missing capability check in the 'Notice::install_activate_plugin' function in all versions up to, and including, 2.1.3. This makes it possible for authenticated attackers, with subscriber-level access and above, to install arbitrary plugins on the affected site's server which may make remote code execution possible. |
| The RSS Aggregator plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'template' parameter in all versions up to, and including, 5.0.10 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Element Pack Addons for Elementor plugin for WordPress is vulnerable to arbitrary file reads in all versions up to, and including, 8.3.17 via the SVG widget and a lack of sufficient file validation in the 'render_svg' function. This makes it possible for authenticated attackers, with contributor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. |
| An Out-Of-Bounds Write vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file. |
| An Out-Of-Bounds Read vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file. |
| Mattermost Desktop App versions <=6.0 6.2.0 5.2.13.0 fail to validate help links which allows a malicious Mattermost server to execute arbitrary executables on a user’s system via the user clicking on certain items in the Help menu Mattermost Advisory ID: MMSA-2026-00577 |
| The Frontend File Manager Plugin WordPress plugin through 23.5 allows unauthenticated users to send emails through the site without any security checks. This lets attackers use the WordPress site as an open relay for spam or phishing emails to anyone. Attackers can also guess file IDs to access and share uploaded files without permission, exposing sensitive information. |
| Missing Authentication for Critical Function vulnerability in TUBITAK BILGEM Software Technologies Research Institute Liderahenk allows Remote Code Inclusion.This issue affects Liderahenk: from 3.0.0 to 3.3.1 before 3.5.0. |
