| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: Writing large, newline-free data into a BIO chain using the
line-buffering filter where the next BIO performs short writes can trigger
a heap-based out-of-bounds write.
Impact summary: This out-of-bounds write can cause memory corruption which
typically results in a crash, leading to Denial of Service for an application.
The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in
TLS/SSL data paths. In OpenSSL command-line applications, it is typically
only pushed onto stdout/stderr on VMS systems. Third-party applications that
explicitly use this filter with a BIO chain that can short-write and that
write large, newline-free data influenced by an attacker would be affected.
However, the circumstances where this could happen are unlikely to be under
attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated
data controlled by an attacker. For that reason the issue was assessed as
Low severity.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the BIO implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| Issue summary: A TLS 1.3 connection using certificate compression can be
forced to allocate a large buffer before decompression without checking
against the configured certificate size limit.
Impact summary: An attacker can cause per-connection memory allocations of
up to approximately 22 MiB and extra CPU work, potentially leading to
service degradation or resource exhaustion (Denial of Service).
In affected configurations, the peer-supplied uncompressed certificate
length from a CompressedCertificate message is used to grow a heap buffer
prior to decompression. This length is not bounded by the max_cert_list
setting, which otherwise constrains certificate message sizes. An attacker
can exploit this to cause large per-connection allocations followed by
handshake failure. No memory corruption or information disclosure occurs.
This issue only affects builds where TLS 1.3 certificate compression is
compiled in (i.e., not OPENSSL_NO_COMP_ALG) and at least one compression
algorithm (brotli, zlib, or zstd) is available, and where the compression
extension is negotiated. Both clients receiving a server CompressedCertificate
and servers in mutual TLS scenarios receiving a client CompressedCertificate
are affected. Servers that do not request client certificates are not
vulnerable to client-initiated attacks.
Users can mitigate this issue by setting SSL_OP_NO_RX_CERTIFICATE_COMPRESSION
to disable receiving compressed certificates.
The FIPS modules in 3.6, 3.5, 3.4 and 3.3 are not affected by this issue,
as the TLS implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4 and 3.3 are vulnerable to this issue.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| Meshtastic is an open source mesh networking solution. In the current Meshtastic architecture, a Node is identified by their NodeID, generated from the MAC address, rather than their public key. This aspect downgrades the security, specifically by abusing the HAM mode which doesn't use encryption. An attacker can, as such, forge a NodeInfo on behalf of a victim node advertising that the HAM mode is enabled. This, in turn, will allow the other nodes on the mesh to accept the new information and overwriting the NodeDB. The other nodes will then only be able to send direct messages to the victim by using the shared channel key instead of the PKC. Additionally, because HAM mode by design doesn't provide any confidentiality or authentication of information, the attacker could potentially also be able to change the Node details, like the full name, short code, etc. To keep the attack persistent, it is enough to regularly resend the forged NodeInfo, in particular right after the victim sends their own. A patch is available in version 2.7.6.834c3c5. |
| Issue summary: Parsing CMS AuthEnvelopedData message with maliciously
crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS AuthEnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME AuthEnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. |
| SandboxJS is a JavaScript sandboxing library. Versions prior to 0.8.26 have a sandbox escape vulnerability due to `AsyncFunction` not being isolated in `SandboxFunction`. The library attempts to sandbox code execution by replacing the global `Function` constructor with a safe, sandboxed version (`SandboxFunction`). This is handled in `utils.ts` by mapping `Function` to `sandboxFunction` within a map used for lookups. However, before version 0.8.26, the library did not include mappings for `AsyncFunction`, `GeneratorFunction`, and `AsyncGeneratorFunction`. These constructors are not global properties but can be accessed via the `.constructor` property of an instance (e.g., `(async () => {}).constructor`). In `executor.ts`, property access is handled. When code running inside the sandbox accesses `.constructor` on an async function (which the sandbox allows creating), the `executor` retrieves the property value. Since `AsyncFunction` was not in the safe-replacement map, the `executor` returns the actual native host `AsyncFunction` constructor. Constructors for functions in JavaScript (like `Function`, `AsyncFunction`) create functions that execute in the global scope. By obtaining the host `AsyncFunction` constructor, an attacker can create a new async function that executes entirely outside the sandbox context, bypassing all restrictions and gaining full access to the host environment (Remote Code Execution). Version 0.8.26 patches this vulnerability. |
| Issue summary: If an application using the SSL_CIPHER_find() function in
a QUIC protocol client or server receives an unknown cipher suite from
the peer, a NULL dereference occurs.
Impact summary: A NULL pointer dereference leads to abnormal termination of
the running process causing Denial of Service.
Some applications call SSL_CIPHER_find() from the client_hello_cb callback
on the cipher ID received from the peer. If this is done with an SSL object
implementing the QUIC protocol, NULL pointer dereference will happen if
the examined cipher ID is unknown or unsupported.
As it is not very common to call this function in applications using the QUIC
protocol and the worst outcome is Denial of Service, the issue was assessed
as Low severity.
The vulnerable code was introduced in the 3.2 version with the addition
of the QUIC protocol support.
The FIPS modules in 3.6, 3.5, 3.4 and 3.3 are not affected by this issue,
as the QUIC implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4 and 3.3 are vulnerable to this issue.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| A denial-of-service vulnerability exists in the NetX IPv6 component functionality of Eclipse ThreadX NetX Duo. A specially crafted network packet of "Packet Too Big" with more than 15 different source address can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability. |
| Issue summary: PBMAC1 parameters in PKCS#12 files are missing validation
which can trigger a stack-based buffer overflow, invalid pointer or NULL
pointer dereference during MAC verification.
Impact summary: The stack buffer overflow or NULL pointer dereference may
cause a crash leading to Denial of Service for an application that parses
untrusted PKCS#12 files. The buffer overflow may also potentially enable
code execution depending on platform mitigations.
When verifying a PKCS#12 file that uses PBMAC1 for the MAC, the PBKDF2
salt and keylength parameters from the file are used without validation.
If the value of keylength exceeds the size of the fixed stack buffer used
for the derived key (64 bytes), the key derivation will overflow the buffer.
The overflow length is attacker-controlled. Also, if the salt parameter is
not an OCTET STRING type this can lead to invalid or NULL pointer
dereference.
Exploiting this issue requires a user or application to process
a maliciously crafted PKCS#12 file. It is uncommon to accept untrusted
PKCS#12 files in applications as they are usually used to store private
keys which are trusted by definition. For this reason the issue was assessed
as Moderate severity.
The FIPS modules in 3.6, 3.5 and 3.4 are not affected by this issue, as
PKCS#12 processing is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5 and 3.4 are vulnerable to this issue.
OpenSSL 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue as they do
not support PBMAC1 in PKCS#12. |
| In Bun before 1.3.5, the default trusted dependencies list (aka trust allow list) can be spoofed by a non-npm package in the case of a matching name (for file, link, git, or github). |
| In GnuPG before 2.5.17, a stack-based buffer overflow exists in tpm2daemon during handling of the PKDECRYPT command for TPM-backed RSA and ECC keys. |
| Integer Overflow or Wraparound vulnerability in yoyofr modizer.This issue affects modizer: before 4.1.1. |
| Access of Resource Using Incompatible Type ('Type Confusion') vulnerability in themrdemonized xray-monolith.This issue affects xray-monolith: before 2025.12.30. |
| Out-of-bounds Read vulnerability in Rinnegatamante lpp-vita.This issue affects lpp-vita: before lpp-vita r6. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in pilgrimage233 Minecraft-Rcon-Manage.This issue affects Minecraft-Rcon-Manage: before 3.0. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.2, a heap buffer over-read when the strlen() function attempts to read a non-null-terminated buffer potentially leaking heap memory contents and causing application termination. This vulnerability affects users of the iccDEV library who process ICC color profiles. ICC Profile Injection vulnerabilities arise when user-controllable input is incorporated into ICC profile data or other structured binary blobs in an unsafe manner. Version 2.3.1.2 contains a fix for the issue. No known workarounds are available. |
| The ML-DSA crate is a Rust implementation of the Module-Lattice-Based Digital Signature Standard (ML-DSA). Starting in version 0.0.4 and prior to version 0.1.0-rc.4, the ML-DSA signature verification implementation in the RustCrypto `ml-dsa` crate incorrectly accepts signatures with repeated (duplicate) hint indices. According to the ML-DSA specification (FIPS 204 / RFC 9881), hint indices within each polynomial must be **strictly increasing**. The current implementation uses a non-strict monotonic check (`<=` instead of `<`), allowing duplicate indices. This is a regression bug. The original implementation was correct, but a commit in version 0.0.4 inadvertently changed the strict `<` comparison to `<=`, introducing the vulnerability. Version 0.1.0-rc.4 fixes the issue. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). In versions prior to 0.26.6, the Dokploy web interface is vulnerable to Clickjacking attacks due to missing frame-busting headers. This allows attackers to embed Dokploy pages in malicious iframes and trick authenticated users into performing unintended actions. Version 0.26.6 patches the issue. |
| Ghost is an open source content management system. In Ghost versions 5.43.0 through 5.12.04 and 6.0.0 through 6.14.0, an attacker was able to craft a malicious link that, when accessed by an authenticated staff user or member, would execute JavaScript with the victim's permissions, potentially leading to account takeover. Ghost Portal versions 2.29.1 through 2.51.4 and 2.52.0 through 2.57.0 were vulnerable to this issue. Ghost automatically loads the latest patch of the members Portal component via CDN. For Ghost 5.x users, upgrading to v5.121.0 or later fixes the vulnerability. v5.121.0 loads Portal v2.51.5, which contains the patch. For Ghost 6.x users, upgrading to v6.15.0 or later fixes the vulnerability. v6.15.0 loads Portal v2.57.1, which contains the patch. For Ghost installations using a customized or self-hosted version of Portal, it will be necessary to manually rebuild from or update to the latest patch version. |
| Squidex is an open source headless content management system and content management hub. Versions of the application up to and including 7.21.0 allow users to define "Webhooks" as actions within the Rules engine. The url parameter in the webhook configuration does not appear to validate or restrict destination IP addresses. It accepts local addresses such as 127.0.0.1 or localhost. When a rule is triggered (Either manual trigger by manually calling the trigger endpoint or by a content update or any other triggers), the backend server executes an HTTP request to the user-supplied URL. Crucially, the server logs the full HTTP response in the rule execution log (lastDump field), which is accessible via the API. Which turns a "Blind" SSRF into a "Full Read" SSRF. As of time of publication, no patched versions are available. |
| An out-of-band SQL injection vulnerability (OOB SQLi) has been detected in the Performance Evaluation (EDD) application developed by Gabinete Técnico de Programación. Exploiting this vulnerability in the parameter 'Id_evaluacion' in '/evaluacion_objetivos_evalua_definido.aspx', could allow an attacker to extract sensitive information from the database through external channels, without the affected application returning the data directly, compromising the confidentiality of the stored information. |
