| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Race condition in ptrace in Linux kernel 2.4 and 2.2 allows local users to gain privileges by using ptrace to track and modify a running setuid process. |
| The (1) __futex_atomic_op and (2) futex_atomic_cmpxchg_inatomic functions in Linux kernel 2.6.17-rc4 to 2.6.18-rc2 perform the atomic futex operation in the kernel address space instead of the user address space, which allows local users to cause a denial of service (crash). |
| Memory leak in __setlease in fs/locks.c in Linux kernel before 2.6.16.16 allows attackers to cause a denial of service (memory consumption) via unspecified actions related to an "uninitialised return value," aka "slab leak." |
| Denial of service in syslog by sending it a large number of superfluous messages. |
| Stack-based buffer overflow in the ncp_lookup function for ncpfs in Linux kernel 2.4.x allows local users to gain privileges. |
| Linux 2.6.11 on 64-bit x86 (x86_64) platforms does not use a guard page for the 47-bit address page to protect against an AMD K8 bug, which allows local users to cause a denial of service. |
| Linux kernel 2.6 before 2.6.11 does not restrict access to the N_MOUSE line discipline for a TTY, which allows local users to gain privileges by injecting mouse or keyboard events into other user sessions. |
| Race condition in do_coredump in signal.c in Linux kernel 2.6 allows local users to cause a denial of service by triggering a core dump in one thread while another thread has a pending SIGSTOP. |
| Masquerading code for Linux kernel before 2.2.19 does not fully check packet lengths in certain cases, which may lead to a vulnerability. |
| The ip_push_pending_frames function in Linux 2.4.x and 2.6.x before 2.6.16 increments the IP ID field when sending a RST after receiving unsolicited TCP SYN-ACK packets, which allows remote attackers to conduct an Idle Scan (nmap -sI) attack, which bypasses intended protections against such attacks. |
| A race condition in the way env_start and env_end pointers are initialized in the execve system call and used in fs/proc/base.c on Linux 2.4 allows local users to cause a denial of service (crash). |
| The ptrace functionality (ptrace.c) in Linux kernel 2.6 before 2.6.14.2, using CLONE_THREAD, does not use the thread group ID to check whether it is attaching to itself, which allows local users to cause a denial of service (crash). |
| Nestea variation of teardrop IP fragmentation denial of service. |
| Unknown vulnerability in classifier code for Linux kernel before 2.2.19 could result in denial of service (hang). |
| ip_nat_pptp in the PPTP NAT helper (netfilter/ip_nat_helper_pptp.c) in Linux kernel 2.6.14, and other versions, allows remote attackers to cause a denial of service (memory corruption or crash) via an inbound PPTP_IN_CALL_REQUEST packet that causes a null pointer to be used in an offset calculation. |
| ip_nat_pptp in the PPTP NAT helper (netfilter/ip_nat_helper_pptp.c) in Linux kernel 2.6.14, and other versions, allows local users to cause a denial of service (memory corruption or crash) via a crafted outbound packet that causes an incorrect offset to be calculated from pointer arithmetic when non-linear SKBs (socket buffers) are used. |
| Memory leak in the seq_file implementation in the SCSI procfs interface (sg.c) in Linux kernel 2.6.13 and earlier allows local users to cause a denial of service (memory consumption) via certain repeated reads from the /proc/scsi/sg/devices file, which is not properly handled when the next() iterator returns NULL or an error. |
| SCTP conntrack (ip_conntrack_proto_sctp.c) in netfilter for Linux kernel 2.6.17 before 2.6.17.3 and 2.6.16 before 2.6.16.23 allows remote attackers to cause a denial of service (crash) via a packet without any chunks, which causes a variable to contain an invalid value that is later used to dereference a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
