| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In JetBrains Hub before 2025.3.104432 a race condition allowed bypass of the Agent-user limit |
| A flaw was found in the subsequent get_user_pages_fast in the Linux kernel’s interface for symmetric key cipher algorithms in the skcipher_recvmsg of crypto/algif_skcipher.c function. This flaw allows a local user to crash the system. |
| A race condition occurred between the functions lmLogClose and txEnd in JFS, in the Linux Kernel, executed in different threads. This flaw allows a local attacker with normal user privileges to crash the system or leak internal kernel information. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: fix data race in show_numa_info()
The following data-race was found in show_numa_info():
==================================================================
BUG: KCSAN: data-race in vmalloc_info_show / vmalloc_info_show
read to 0xffff88800971fe30 of 4 bytes by task 8289 on cpu 0:
show_numa_info mm/vmalloc.c:4936 [inline]
vmalloc_info_show+0x5a8/0x7e0 mm/vmalloc.c:5016
seq_read_iter+0x373/0xb40 fs/seq_file.c:230
proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299
....
write to 0xffff88800971fe30 of 4 bytes by task 8287 on cpu 1:
show_numa_info mm/vmalloc.c:4934 [inline]
vmalloc_info_show+0x38f/0x7e0 mm/vmalloc.c:5016
seq_read_iter+0x373/0xb40 fs/seq_file.c:230
proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299
....
value changed: 0x0000008f -> 0x00000000
==================================================================
According to this report,there is a read/write data-race because
m->private is accessible to multiple CPUs. To fix this, instead of
allocating the heap in proc_vmalloc_init() and passing the heap address to
m->private, vmalloc_info_show() should allocate the heap. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix race between cache write completion and ALL_QUEUED being set
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED. |
| In the Linux kernel, the following vulnerability has been resolved:
ath11k: fix netdev open race
Make sure to allocate resources needed before registering the device.
This specifically avoids having a racing open() trigger a BUG_ON() in
mod_timer() when ath11k_mac_op_start() is called before the
mon_reap_timer as been set up.
I did not see this issue with next-20220310, but I hit it on every probe
with next-20220511. Perhaps some timing changed in between.
Here's the backtrace:
[ 51.346947] kernel BUG at kernel/time/timer.c:990!
[ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
...
[ 51.578225] Call trace:
[ 51.583293] __mod_timer+0x298/0x390
[ 51.589518] mod_timer+0x14/0x20
[ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k]
[ 51.603165] drv_start+0x38/0x60 [mac80211]
[ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211]
[ 51.617945] ieee80211_open+0x60/0xb0 [mac80211]
[ 51.625311] __dev_open+0x100/0x1c0
[ 51.631420] __dev_change_flags+0x194/0x210
[ 51.638214] dev_change_flags+0x24/0x70
[ 51.644646] do_setlink+0x228/0xdb0
[ 51.650723] __rtnl_newlink+0x460/0x830
[ 51.657162] rtnl_newlink+0x4c/0x80
[ 51.663229] rtnetlink_rcv_msg+0x124/0x390
[ 51.669917] netlink_rcv_skb+0x58/0x130
[ 51.676314] rtnetlink_rcv+0x18/0x30
[ 51.682460] netlink_unicast+0x250/0x310
[ 51.688960] netlink_sendmsg+0x19c/0x3e0
[ 51.695458] ____sys_sendmsg+0x220/0x290
[ 51.701938] ___sys_sendmsg+0x7c/0xc0
[ 51.708148] __sys_sendmsg+0x68/0xd0
[ 51.714254] __arm64_sys_sendmsg+0x28/0x40
[ 51.720900] invoke_syscall+0x48/0x120
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix race between async reclaim worker and close_ctree()
Syzbot reported an assertion failure due to an attempt to add a delayed
iput after we have set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info
state:
WARNING: CPU: 0 PID: 65 at fs/btrfs/inode.c:3420 btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420
Modules linked in:
CPU: 0 UID: 0 PID: 65 Comm: kworker/u8:4 Not tainted 6.15.0-next-20250530-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Workqueue: btrfs-endio-write btrfs_work_helper
RIP: 0010:btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420
Code: 4e ad 5d (...)
RSP: 0018:ffffc9000213f780 EFLAGS: 00010293
RAX: ffffffff83c635b7 RBX: ffff888058920000 RCX: ffff88801c769e00
RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff888058921b67 R09: 1ffff1100b12436c
R10: dffffc0000000000 R11: ffffed100b12436d R12: 0000000000000001
R13: dffffc0000000000 R14: ffff88807d748000 R15: 0000000000000100
FS: 0000000000000000(0000) GS:ffff888125c53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00002000000bd038 CR3: 000000006a142000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_put_ordered_extent+0x19f/0x470 fs/btrfs/ordered-data.c:635
btrfs_finish_one_ordered+0x11d8/0x1b10 fs/btrfs/inode.c:3312
btrfs_work_helper+0x399/0xc20 fs/btrfs/async-thread.c:312
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
This can happen due to a race with the async reclaim worker like this:
1) The async metadata reclaim worker enters shrink_delalloc(), which calls
btrfs_start_delalloc_roots() with an nr_pages argument that has a value
less than LONG_MAX, and that in turn enters start_delalloc_inodes(),
which sets the local variable 'full_flush' to false because
wbc->nr_to_write is less than LONG_MAX;
2) There it finds inode X in a root's delalloc list, grabs a reference for
inode X (with igrab()), and triggers writeback for it with
filemap_fdatawrite_wbc(), which creates an ordered extent for inode X;
3) The unmount sequence starts from another task, we enter close_ctree()
and we flush the workqueue fs_info->endio_write_workers, which waits
for the ordered extent for inode X to complete and when dropping the
last reference of the ordered extent, with btrfs_put_ordered_extent(),
when we call btrfs_add_delayed_iput() we don't add the inode to the
list of delayed iputs because it has a refcount of 2, so we decrement
it to 1 and return;
4) Shortly after at close_ctree() we call btrfs_run_delayed_iputs() which
runs all delayed iputs, and then we set BTRFS_FS_STATE_NO_DELAYED_IPUT
in the fs_info state;
5) The async reclaim worker, after calling filemap_fdatawrite_wbc(), now
calls btrfs_add_delayed_iput() for inode X and there we trigger an
assertion failure since the fs_info state has the flag
BTRFS_FS_STATE_NO_DELAYED_IPUT set.
Fix this by setting BTRFS_FS_STATE_NO_DELAYED_IPUT only after we wait for
the async reclaim workers to finish, after we call cancel_work_sync() for
them at close_ctree(), and by running delayed iputs after wait for the
reclaim workers to finish and before setting the bit.
This race was recently introduced by commit 19e60b2a95f5 ("btrfs: add
extra warning if delayed iput is added when it's not allowed"). Without
the new validation at btrfs_add_delayed_iput(),
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: fix race condition in unaccepted memory handling
The page allocator tracks the number of zones that have unaccepted memory
using static_branch_enc/dec() and uses that static branch in hot paths to
determine if it needs to deal with unaccepted memory.
Borislav and Thomas pointed out that the tracking is racy: operations on
static_branch are not serialized against adding/removing unaccepted pages
to/from the zone.
Sanity checks inside static_branch machinery detects it:
WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0
The comment around the WARN() explains the problem:
/*
* Warn about the '-1' case though; since that means a
* decrement is concurrent with a first (0->1) increment. IOW
* people are trying to disable something that wasn't yet fully
* enabled. This suggests an ordering problem on the user side.
*/
The effect of this static_branch optimization is only visible on
microbenchmark.
Instead of adding more complexity around it, remove it altogether. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a data-race around bpf_jit_limit.
While reading bpf_jit_limit, it can be changed concurrently via sysctl,
WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit
is long, so we need to add a paired READ_ONCE() to avoid load-tearing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: start MHI channel after endpoit creation
MHI channel may generates event/interrupt right after enabling.
It may leads to 2 race conditions issues.
1)
Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check:
if (!qdev || mhi_res->transaction_status)
return;
Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at
this moment. In this situation qrtr-ns will be unable to enumerate
services in device.
---------------------------------------------------------------
2)
Such event may come at the moment after dev_set_drvdata() and
before qrtr_endpoint_register(). In this case kernel will panic with
accessing wrong pointer at qcom_mhi_qrtr_dl_callback():
rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr,
mhi_res->bytes_xferd);
Because endpoint is not created yet.
--------------------------------------------------------------
So move mhi_prepare_for_transfer_autoqueue after endpoint creation
to fix it. |
| Race in Storage in Google Chrome on Windows prior to 142.0.7444.59 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race where eprobes can be called before the event
The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.
Test for a NULL record to keep this from happening. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
amd_pmu_enable_all() does:
if (!test_bit(idx, cpuc->active_mask))
continue;
amd_pmu_enable_event(cpuc->events[idx]);
A perf NMI of another event can come between these two steps. Perf NMI
handler internally disables and enables _all_ events, including the one
which nmi-intercepted amd_pmu_enable_all() was in process of enabling.
If that unintentionally enabled event has very low sampling period and
causes immediate successive NMI, causing the event to be throttled,
cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop().
This will result in amd_pmu_enable_event() getting called with event=NULL
when amd_pmu_enable_all() resumes after handling the NMIs. This causes a
kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000198
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
[...]
Call Trace:
<TASK>
amd_pmu_enable_all+0x68/0xb0
ctx_resched+0xd9/0x150
event_function+0xb8/0x130
? hrtimer_start_range_ns+0x141/0x4a0
? perf_duration_warn+0x30/0x30
remote_function+0x4d/0x60
__flush_smp_call_function_queue+0xc4/0x500
flush_smp_call_function_queue+0x11d/0x1b0
do_idle+0x18f/0x2d0
cpu_startup_entry+0x19/0x20
start_secondary+0x121/0x160
secondary_startup_64_no_verify+0xe5/0xeb
</TASK>
amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler
were recently added as part of BRS enablement but I'm not sure whether
we really need them. We can just disable BRS in the beginning and enable
it back while returning from NMI. This will solve the issue by not
enabling those events whose active_masks are set but are not yet enabled
in hw pmu. |
| A flaw was found in pfn_swap_entry_to_page in memory management subsystem in the Linux Kernel. In this flaw, an attacker with a local user privilege may cause a denial of service problem due to a BUG statement referencing pmd_t x. |
| A race condition flaw was found in sssd where the GPO policy is not consistently applied for authenticated users. This may lead to improper authorization issues, granting or denying access to resources inappropriately. |
| Discourse is an open-source discussion platform. Prior to versions `3.3.4` on the `stable` branch and `3.4.0.beta5` on the `beta` branch, someone who is about to reach the limit of users in a group DM may send requests to add new users in parallel. The requests might all go through ignoring the limit due to a race condition. The patch in versions `3.3.4` and `3.4.0.beta5` uses the `lock` step in service to wrap part of the `add_users_to_channel` service inside a distributed lock/mutex in order to avoid the race condition. |
| A flaw was found in the Netfilter subsystem of the Linux kernel. A race condition between IPSET_CMD_ADD and IPSET_CMD_SWAP can lead to a kernel panic due to the invocation of `__ip_set_put` on a wrong `set`. This issue may allow a local user to crash the system. |
| A use-after-free flaw was found in the Linux Kernel due to a race problem in the unix garbage collector's deletion of SKB races with unix_stream_read_generic() on the socket that the SKB is queued on. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
There are two issues related to the mapping of pages belonging to other
domains: For one, an assertion is wrong there, where the case actually
needs handling. A NULL pointer de-reference could result on a release
build. This is CVE-2025-58144.
And then the P2M lock isn't held until a page reference was actually
obtained (or the attempt to do so has failed). Otherwise the page can
not only change type, but even ownership in between, thus allowing
domain boundaries to be violated. This is CVE-2025-58145. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Apache Tomcat when using the APR/Native connector. This was particularly noticeable with client initiated closes of HTTP/2 connections.
This issue affects Apache Tomcat: from 9.0.0.M1 through 9.0.106.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 through 8.5.100. Other, older, EOL versions
may also be affected.
Users are recommended to upgrade to version 9.0.107, which fixes the issue. |
