| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: Use PFP on the compute queues too
On GFX6, the compute rings use the same CP path as
the graphics ring. The only difference is that they
don't support draw commands. (As opposed to GFX7 and
newer which have a separate command parser that is
called MEC for compute queues.)
This means that we have to take into consideration
that the PFP also exists on compute queues on GFX6:
Use PFP for register writes on both graphics and
compute queues.
In the pipeline sync, use the PFP to wait for the
previous fence (and not the ME) to prevent the PFP
from starting to execute the next submission while
the ME is still in the previous submission.
After a VM flush, emit PFP_SYNC_ME on compute
queues as well. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create()
failure must unregister disk_dev and let scsi_disk_release() free
sdkp. Going through out_free_index kfree()s an already registered device
and leaks the sysfs entry. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: don't clobber the extent buffer when zeroing it out
On a zoned filesystem a freed-but-still-dirty tree block is written out
as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write
pointer advancing. btree_csum_one_bio() implemented this by memzeroing
the extent buffer's own folios before submission.
That destroys the in-memory buffer while it may still be referenced. In
particular btrfs_free_tree_block() can run on it afterwards and reads
the header to add a delayed reference; once the header has been zeroed
it frees bytenr 0 and corrupts the extent tree (the
btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an
"unable to find ref" abort). It is flaky and reproduces under fsstress,
e.g. generic/461 and generic/013.
Write the zeros to disk from the shared zero page instead and leave the
extent buffer content untouched, so any later reference - including the
delayed reference from btrfs_free_tree_block() - still sees a valid
header. end_bbio_meta_write() now clears writeback on the buffer's own
folios, as the bio no longer carries them. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Restore locking around msi_page_list
Unlike a group's default domain, which is always freshly allocated
and privately owned (iommu_group_alloc_default_domain()), VFIO type1's
legacy container merges any newly attached group into an existing
domain whenever their iommu_ops and cache-coherency enforcement match.
iommu_dma_get_msi_page() only asserts the caller's own group mutex is
held (iommu_group_mutex_assert()). On an IOMMU that publishes
IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned
through the legacy container can have their guest drivers probe and
allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands
on a different device fd and group mutex, but both devices' domains
are the same merged domain, so both can enter
iommu_dma_get_msi_page() concurrently and corrupt msi_page_list.
commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a
generic operation") dropped the prior msi_prepare_lock on the
reasoning that "each iommu_domain is unique to a group," which holds
for default domains but not this VFIO type1 case. Restore the static
lock, since it's only guarding a corner case and will likely never
be contended.
iommufd avoids the equivalent problem by having its own callers
(iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever
reaching the shared list. VFIO type1 can't mirror that since it
dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down copied context entry
copied_context_tear_down() zeroes the 128-bit context entry with
context_clear_entry() while the Present bit is still set, and only then
issues the context-cache and IOTLB invalidations. This leaves a window
in which hardware can fetch a torn entry, with some fields already zeroed
while Present is still set, leading to unpredictable behaviour or
spurious faults. While x86 provides strong write ordering, the compiler
may reorder the writes to the two 64-bit halves of the entry, and the
hardware fetch is not guaranteed to be atomic with respect to multiple
CPU writes.
There is no cacheline flush before the invalidation either, so on an
IOMMU without coherent access to the context table the zeroed entry may
not be visible to hardware at the point the invalidation is submitted.
Apply the same ownership handshake described in the VT-d spec, Section
6.5.3.3 ("Guidance to Software for Invalidations"): clear only the Present
bit, flush it out to the IOMMU, perform the invalidations, and only then
zero the remainder of the entry. |
| IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to improper validation of message distribution list structures. |
| IBM Common Licensing Agent 9.0, Agent 9.0.0.1, Agent 9.0.0.2, ART 9.0, ART 9.0.0.1, and ART 9.0.0.2 is vulnerable to cross-site scripting. This vulnerability allows an unauthenticated attacker to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| IBM Controller 11.0.0 through 11.0.1 FP7, and 11.1.0 through 11.1.3 FP1 could allow an authenticated user to bypass input validation due to improper validation of client-side input of file size. |
| IBM QRadar 7.5.0 through 7.5.0 UP15 Interim Fix 006 could allow an authenticated user to obtain sensitive information from backup files due to incorrect permissions assignment. |
| IBM MQ Console allows authenticated non-administrative users to create and start queue managers due to improper authorization checks. |
| IBM Common Licensing Agent 9.0, Agent 9.0.0.1, Agent 9.0.0.2, ART 9.0, ART 9.0.0.1, and ART 9.0.0.2 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject out-of-range evcn in mi_enum_attr()
In mi_enum_attr(), the start/end VCN validation for non-resident
attributes is:
if (svcn > evcn + 1) goto out;
When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn
passes the check. For evcn values close to U64_MAX (but not equal to it)
the right-hand side is still a meaningless near-wrap upper bound, so a
malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass
mi_enum_attr() unrejected.
VCN (virtual cluster number) is a cluster index, so any valid evcn is
bounded by the volume's total cluster count, which ntfs3 holds in
sbi->used.bitmap.nbits (set up in ntfs_init_from_boot() before any caller
of mi_enum_attr() runs). Reject evcn values that fall outside this range.
However, an empty non-resident attribute (no allocated clusters) is
legitimately encoded with svcn == 0 and evcn == -1 (U64_MAX), e.g. via
attr->nres.evcn = cpu_to_le64((u64)vcn - 1) with vcn == 0. That sentinel
must keep passing, so exclude evcn == U64_MAX from the range check. The
existing "svcn > evcn + 1" test still tolerates the sentinel ("0 > 0" is
false) and continues to require svcn == 0 for it, while the range check
rejects every other out-of-range evcn and thereby also defuses the
"evcn + 1" wraparound.
svcn does not need its own bound: once evcn < nbits, "svcn > evcn + 1"
implies svcn <= nbits.
[almaz.alexandrovich@paragon-software.com: fixed evcn check] |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: riscv-sbi-mpxy: validate RPMI notification lengths
The SBI return value controls how many bytes are copied from shared
memory into the RPMI notification buffer. It is not validated against
the negotiated shared-memory size before that copy. The event walker
also uses a reversed loop condition and can inspect a short event record.
Validate the complete notification length before copying it, iterate only
while a full event header remains, and stop when a declared event payload
extends beyond the copied notification data. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: destroy QP before mem pools on accept failure
On the rdma_accept_failed error path of
smbdirect_accept_connect_request(), the receive io posted just above is
owned by the QP (recv_io is set to NULL after a successful post). The
error path fell through to smbdirect_connection_destroy_mem_pools()
before smbdirect_connection_destroy_qp(), so the mem pools and the
recv_io slab cache were destroyed while that recv_io was still
outstanding on the QP.
The drain in smbdirect_connection_destroy_qp() (ib_drain_qp()) is what
runs the recv completion that returns the recv_io to the free list, so
destroying the pools first leaves the object outstanding at
kmem_cache_destroy() time ("Slab cache still has objects") and later
frees it into an already-destroyed mempool (mempool_free_bulk
NULL-pointer dereference).
Give rdma_accept_failed its own teardown that drains the QP first, then
destroys the mem pools, and returns. The remaining labels
(post_recv_io_failed onward) run before the recv_io was ever posted, so
they keep the mem-pools-then-qp order.
The outstanding recv_io at kmem_cache_destroy() time:
[ 3487.344647] =============================================================================
[ 3487.349942] BUG smbdirect_recv_io_cache_ffff88811ba99000 (Not tainted): Objects remaining on __kmem_cache_shutdown()
[ 3487.356078] -----------------------------------------------------------------------------
[ 3487.356078]
[ 3487.356738] Object 0xffff8881511c3440 @offset=13376
[ 3487.358464] Allocated in mempool_alloc_noprof+0x18c/0x290 age=1194 cpu=6 pid=22254
[ 3487.361197] mempool_alloc_noprof+0x18c/0x290
[ 3487.361542] smbdirect_connection_create_mem_pools+0x405/0x780
[ 3487.361972] smbdirect_accept_connect_request+0x5a8/0x1b80
[ 3487.362359] smbdirect_listen_rdma_event_handler+0x1579/0x1b90
[ 3487.362779] cma_cm_event_handler+0x9c/0x230
[ 3487.363096] cma_ib_req_handler+0x2682/0x45d0
[ 3487.363414] cm_process_work+0x56/0x3d0
[ 3487.363676] cm_work_handler+0x8a0e/0xd000
[ 3487.367496] process_scheduled_works+0xa07/0x13a0
[ 3487.367859] worker_thread+0x7c9/0xc80
[ 3487.368148] kthread+0x341/0x430
[ 3487.368407] ret_from_fork+0x3a8/0x7a0
[ 3487.368704] ret_from_fork_asm+0x1a/0x30
[ 3487.370307] Slab 0xffffea0005447000 objects=19 used=1 fp=0xffff8881511c0040 flags=0x100000000000240(workingset|head|node=0|zone=2)
[ 3487.372840] ------------[ cut here ]------------
[ 3487.373195] WARNING: mm/slub.c:1244 at __slab_err+0x1a/0x30, CPU#6: kworker/6:84/22254
[ 3487.373759] Modules linked in:
[ 3487.373993] CPU: 6 UID: 0 PID: 22254 Comm: kworker/6:84 Tainted: G B 7.1.0-next-20260623+ #88 PREEMPT(lazy)
[ 3487.374778] Tainted: [B]=BAD_PAGE
[ 3487.377830] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 3487.378515] Workqueue: ib_cm cm_work_handler
[ 3487.378820] RIP: 0010:__slab_err+0x1a/0x30
[ 3487.379129] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 e8 36 00 00 00 bf 05 00 00 00 be 01 00 00 00 e8 f7 75 45 00 90 <0f> 0b 90 c3 cc cc cc cc cc 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
[ 3487.383255] RSP: 0018:ffff888220fc7050 EFLAGS: 00010093
[ 3487.383643] RAX: ffffffff8168e60a RBX: ffff88810955e640 RCX: ffff88821c381d80
[ 3487.384158] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff870fa080
[ 3487.384662] RBP: ffff888220fc7068 R08: ffffffff870fa087 R09: 1ffffffff0e1f410
[ 3487.385192] R10: dffffc0000000000 R11: fffffbfff0e1f411 R12: ffffea0005447210
[ 3487.385674] R13: ffffea0005447000 R14: ffff888220fc7068 R15: ffff88812a8ab300
[ 3487.388932] FS: 0000000000000000(0000) GS:ffff888427e76000(0000) knlGS:0000000000000000
[ 3487.389529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3487.389934] CR2: 00007ffcf2d84fd8 CR3: 0000000111d64006 CR4: 0000000000f72ef0
[ 3487.390440] PKRU: 55555554
[ 3487.390641] Call Trace:
[ 3487.390826] <TASK>
[ 3
---truncated--- |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer publishing granted locks to prevent UAF/double-free race
In smb2_lock(), mid-batch granted locks are published to connection-wide
(conn->lock_list) and file-wide (fp->lock_list) lists immediately upon
vfs_lock_file() success, while also remaining tracked on the stack-local
rollback_list.
If a subsequent element in the same SMB2_LOCK request array fails
validation or execution, the thread jumps to out: and walks
rollback_list to undo previously granted locks. However, because the
granted lock was already published to conn->lock_list, a concurrent
UNLOCK request on the same connection can find the lock object and
kfree() it before the rollback loop executes.
When the granting thread subsequently walks rollback_list, it
dereferences and frees the already-freed ksmbd_lock structure, resulting
in a Use-After-Free and Double-Free (on both ksmbd_lock and struct
file_lock).
Fix this by deferring the publication of granted locks to
conn->lock_list and fp->lock_list until after the entire array of lock
elements has been processed without error. Mid-batch grants remain
tracked exclusively on the request-local rollback_list until the whole
batch succeeds, eliminating the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: remove callback IDR entry on client allocation failure
nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it
finishes setting up the client. If any later initialization step fails,
the error path frees the nfs_client directly with nfs_free_client(). That
bypasses nfs_put_client(), which is where the callback IDR entry is
removed during normal teardown.
A failed allocation can therefore leave cb_ident_idr pointing at a freed
nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the
stale pointer and take a reference to it.
Make the callback IDR removal helper callable by the allocation failure
path, and remove the callback identifier before freeing the client.
This was found by a local static-analysis checker for publish-before-free
lifetime bugs and confirmed by manual inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed
Previously, hinic3_send_one_skb() cached the skb fragment count before
calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to
skb_checksum_help() for unsupported tunnel packets, the skb may be
linearized. Continuing to build the TX descriptor with the stale
fragment count leads to a descriptor mismatch, which can trigger
out-of-bounds DMA reads or IOMMU faults.
Furthermore, the old code ignored the return value of skb_checksum_help(),
transmitting corrupted packets with incomplete checksums upon failure.
Fix this by:
1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to
ensure the correct fragment count is used if the SKB is linearized.
2. Propagating skb_checksum_help() errors and returning
HINIC3_TX_OFFLOAD_INVALID to properly drop the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
net: kcm: Hold RCU read lock while running BPF parser
kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which
prevents CPU migration, but does not establish an RCU read-side
critical section. Consequently, BPF map operations can trigger
WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser
program.
Hold the RCU read lock while running the program. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix integer overflow in ftp helper port/address parsing
ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16
(hport) and into unsigned char (p[]) without checking for overflow.
A crafted FTP PASV/EPSV response with an over-long port or address
octet wraps the value, so the helper configures the data connection
with a truncated port/address.
The netfilter conntrack FTP helper had the same defect, fixed in
commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16
overflows"). Apply the equivalent fix here: widen the port accumulator
to u32 and reject values above 65535, and reject address octets above
255. |
