| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Oracle Hyperion Calculation Manager product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Oracle Hyperion Calculation Manager executes to compromise Oracle Hyperion Calculation Manager. While the vulnerability is in Oracle Hyperion Calculation Manager, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Calculation Manager accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Calculation Manager accessible data. CVSS 3.1 Base Score 8.0 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:N). |
| Vulnerability in the Oracle Hyperion Calculation Manager product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Hyperion Calculation Manager executes to compromise Oracle Hyperion Calculation Manager. While the vulnerability is in Oracle Hyperion Calculation Manager, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Calculation Manager accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N). |
| Issue summary: OpenSSL CMS decryption sizes the key-unwrap output buffer based
on querying the unwrapped key size, but the AES-WRAP-PAD unwrap primitive
can write and cleanse more bytes than that query reports, causing an 8-byte
out-of-bounds heap write.
Impact summary: An attacker who supplies a crafted CMS message can trigger a
deterministic 8-byte out-of-bounds heap write when the victim decrypts it
with CMS_decrypt(), corrupting the heap and typically resulting in a Denial
of Service.
CWE: CWE-787: Out-of-bounds Write
Description: The key-wrap OID is potentially attacker-controlled on the wire.
CMS unwrapping allows both id-aesNNN-wrap-pad and id-aesNNN-wrap ciphers.
An attacker can take a legitimate message and change a single OID byte to
select the padded variant while leaving the message otherwise valid. Since
the unwrap key is derived from the recipient's private operation (ECDH key
agreement or ML-KEM decapsulation), the RFC 5649 integrity check cannot
pass, and the decryption fails with integrity failure.
The write is a fixed-size (8-byte), fixed-value (zero) heap overflow
immediately past the allocation, requires no special configuration, and is
reachable from the public CMS_decrypt() function. The consequence is
a heap corruption leading to a Denial of Service. The fix in the CMS code
sizes the unwrap output buffer for the worst case so a failed unwrap cannot
write past the allocation.
FIPS impact: no
As the CMS code lives outside the FIPS module boundary, no FIPS
modules are affected by this CVE. |
| Issue summary: The OpenSSL Certificate Management Protocol (CMP) caches
additional certificates (extraCerts) sent in a CMP message, but never expunges
them (for instance if they are invalid). If a server reuses an OSSL_CMP_CTX
frequently, this cache of extraCerts may grow unboundedly, and a malicious
client may flood a CMP server with requests driving this growth.
Impact summary: Users utilizing a CMP server that reuses a single OSSL_CMP_CTX
for the lifetime of a server process may observe unbounded memory growth in the
event a malicious client repeatedly sends requests containing unique extra
certificates, which may lead to OOM conditions.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: If a remote user sends CMP messages to a server with a list of
extraCerts and the message is rejected, the extraCerts from the message remains
in the server contexts untrusted certificate stack. This exposes servers with
long lived ctx objects to Denial of Service attacks in which an attacker sends
messages intending to be rejected with a large list of additional certificates
repeatedly, forcing the server to store them indefinitely.
The issue was fixed by removing the added extra certs if the message is
rejected, using the same method as when the context is configured to not do
caching at all.
FIPS impact: no
As the CMP code lives outside the FIPS module boundary, no FIPS
modules are affected by this CVE. |
| Issue summary: When OpenSSL processes QUIC traffic from a peer that repeatedly
sends ack-eliciting packets while not acknowledging ACK-only responses, the
QUIC stack can retain ACK-only packet metadata for the lifetime of the
connection.
Impact summary: A remote peer that can complete a QUIC handshake can
cause connection-scoped memory growth which may lead to Denial of Service
through memory exhaustion, especially with sustained traffic or many concurrent
QUIC connections.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: When the OpenSSL QUIC stack sends an ACK-only packet,
there is no requirement by the QUIC protocol that the peer will acknowledge
that ACK-only packet (i.e. it is itself not ack-eliciting). However, the OpenSSL
implementation stores the metadata about the ACK frames regardless.
In and of itself that's ok, but if a malicious peer establishes a connection, and
then drives the connection such that ACK-only packets are forced from the
OpenSSL implementation peer (i.e., by sending numerous PING frames),
and then withholding any subsequent acks for ack-eliciting data, like
legitimate data, said malicious peer can force inappropriate memory growth
on the OpenSSL peer, potentially leading to a Denial of Service.
The fix is to ensure that we account for the transmission of the ACK-only
packet in the packet histories high and low watermark without actually storing
the ACK-only packet metadata itself.
FIPS impact: no
The OpenSSL FIPS module is not affected as the QUIC code is
outside the FIPS module boundary. |
| PraisonAI is a multi-agent teams system. From praisonai 4.6.34 until 4.6.58, praisonai serve agents accepts --api-key but _create_agents_app() does not authenticate POST /agents or POST /agents/{agent_name}. A network caller can invoke configured agents without credentials even when an API key was supplied. This issue is fixed in version 4.6.58. |
| Under specific circumstances, low-level user can run request to remote CocoaPods repos via JFrog Artifactory External Dependency. |
| An authorization weakness in JFrog Artifactory Composer repository handling may allow an authenticated user, under specific conditions, to read package metadata from repositories they are not authorized to read. The issue affects confidentiality and has been addressed in fixed Artifactory versions. |
| A code execution security issue exists within Studio 5000 Logix Designer® due to an unquoted search path in the External Tools configuration. The executable paths specified in the external tools configuration file are not properly quoted, and because these paths contain spaces, the operating system may resolve them to unintended executables placed earlier in the search order. If exploited, an attacker could plant a malicious executable in a location within the search path, resulting in arbitrary code execution with the same permissions of the user running the application. |
| A path traversal security issue exists within Studio 5000 Logix Designer® due to improper limitation of file paths within ACD project files. The software does not sanitize or validate file names embedded in the ACD file structure during the project opening procedure, allowing path traversal sequences to escape the intended extraction directory. If exploited, an attacker could craft a malicious ACD project file that results in arbitrary files being written to attacker-controlled locations on the file system, potentially leading to code execution. |
| A remote code execution security issue exists within Studio 5000 Logix Designer® due to incorrect authorization on a configuration file. This can allow any authenticated user to modify the paths of external tools configured within the application. If exploited, an attacker could alter the configuration to point to a malicious executable, resulting in arbitrary code execution when any user interacts with the external tools functionality. |
| A flaw was found in open-iscsi. This vulnerability allows a remote attacker on the same local network segment to cause a Denial of Service (DoS) in the iscsiuio daemon. By sending a specially crafted Internet Control Message Protocol version 6 (ICMPv6) Router Advertisement with a zero-length option, the attacker can trigger an infinite loop. This leads to sustained CPU usage, rendering the daemon unresponsive and impacting system availability. A secondary risk of out-of-bounds reads exists with a short IPv6 payload, though no memory corruption or data exposure has been confirmed. |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. |
| Multiple Use-After-Free vulnerabilities were found in the add_archive_element function in ld/ldmain.c of the GNU linker (ld), a component of binutils. The root cause is that plugin_maybe_claim() in ld/plugin.c frees the original BFD object via bfd_close/_bfd_delete_bfd when entry->the_bfd->my_archive == NULL, but the caller retains both the original abfd parameter and a shallow copy (orig_input.the_bfd) as dangling pointers. These dangling pointers are subsequently dereferenced at three distinct locations in add_archive_element:
1. Line ~1442: accessing abfd->my_archive via bfd_usrdata(abfd->my_archive)
2. Line ~1493: multiple accesses to abfd and abfd->my_archive in a conditional check and bfd_get_filename call
3. Line ~1525: dereferencing the shallow copy orig_input.the_bfd->my_archive in trace/verbose logging
The vulnerability is triggered when LTO plugins are active (link_info.lto_plugin_active is true) and the input object has abfd->my_archive == NULL, which is a valid state for standalone object files. Red Hat builds binutils with --enable-plugins and --enable-lto, confirming the vulnerable code path is compiled in and reachable.
An attacker who can supply a crafted object or archive file to a build process using LTO-enabled linking could exploit this flaw to cause a denial of service (linker crash via segmentation fault). Arbitrary code execution is theoretically possible through heap manipulation but is substantially mitigated by hardening measures including stack protector, FORTIFY_SOURCE, ASLR, and PIE.
The attack surface is limited to build-time environments — the linker is a development tool not exposed in production runtime. The most realistic exploitation scenario is a supply chain attack introducing a crafted object file as a build dependency in CI/CD pipelines or development environments. |
| Hyperledger Fabric is an enterprise-grade permissioned distributed ledger framework for developing solutions and applications. From versions 1.0.0 to 2.2.26, Channel.java implements readObject() and exposes deSerializeChannel() which call ObjectInputStream.readObject() on untrusted byte arrays without configuring an ObjectInputFilter. This is a classic Java deserialization RCE pattern. At time of publication, there are no publicly available patches. |
| Issue summary: OpenSSL CMP password based protection verification only
checks whether the protectionAlg parameter was not NULL and not its
ASN.1 type, before treating it as a PBMParameter. A crafted message can
contain a parameter of a different type, which is then dereferenced as an
invalid pointer.
Impact summary: A remote, unauthenticated attacker can crash an application
acting as a CMP server that accepts PBM-protected messages, or a CMP client
talking to a malicious or intercepted CMP server, resulting in a Denial of
Service.
CWE: CWE-476: NULL Pointer Dereference
Description: When verifying the password-based MAC protection of a CMP
message, OpenSSL library reads the protectionAlg algorithm parameter with
X509_ALGOR_get0(), which returns both the parameter type and its value
pointer. The value is then cast to an ASN1_STRING and treated as the
expected PBMParameter after only checking that pointer is not NULL. The
parameter type returned by X509_ALGOR_get0() was never consulted.
This happens during protection verification, before any MAC is computed, so
no knowledge of the PBM shared secret is required; the only precondition is
that PBM verification is reachable. On the server side this is reached from
OSSL_CMP_SRV_process_request() for any application that stands up a CMP
server accepting PBM-protected messages, and on the client side from CMP
response validation against a malicious or on-path (MITM) server. The
reliable consequence is a denial of service; there is no memory disclosure,
no controlled memory write, and no path to code execution. CMP is a
specialized feature that an application must explicitly enable.
FIPS impact: no
As the CMP code lives outside the FIPS module boundary, no FIPS modules
are affected by this CVE. |
| PraisonAI is a multi-agent teams system. Prior to praisonai 4.6.51, is_path_within_directory() uses os.path.abspath() rather than os.path.realpath() for the workspace boundary. A symlink inside workspace can point outside and still pass the check, allowing read_file and other code tools to access files outside the configured workspace. This issue is fixed in version 4.6.58. |
| PraisonAI is a multi-agent teams system. Prior to praisonai 4.6.58, MCP HTTP Stream _validate_origin uses request_origin.startswith(allowed), allowing the attacker-controlled localhost.attacker.com HTTP origin to satisfy the localhost allowlist. A webpage can send Content-Type: text/plain requests without preflight and invoke tools/call without an API key, including file writes that persist agent instructions. This issue is fixed in version 4.6.58. |
| PraisonAI is a multi-agent teams system. Prior to praisonai 4.6.58, Browser Server _handle_connection() checks Chrome extension origins with re.match() and the unanchored expression chrome-extension://[a-z0-9]{32}. Extra trailing characters pass before websocket.accept(), allowing start_session commands and unauthorized browser automation. This issue is fixed in version 4.6.58. |
| Nokogiri versions before 1.19.1 fail to check the return value from xmlC14NExecute in the canonicalize method, returning an empty string on failure instead of raising an exception. Attackers can exploit this to bypass signature validation in downstream SAML libraries by providing invalid canonicalized XML that is incorrectly accepted as valid. |
