| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: check device is present when getting link settings
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd7fb65
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers. |
| An issue was discovered in libexpat before 2.6.3. nextScaffoldPart in xmlparse.c can have an integer overflow for m_groupSize on 32-bit platforms (where UINT_MAX equals SIZE_MAX). |
| An issue was discovered in libexpat before 2.6.3. dtdCopy in xmlparse.c can have an integer overflow for nDefaultAtts on 32-bit platforms (where UINT_MAX equals SIZE_MAX). |
| An issue was discovered in libexpat before 2.6.3. xmlparse.c does not reject a negative length for XML_ParseBuffer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: initialise extack before use
Fix missing initialisation of extack in flow offload. |
| In the Linux kernel, the following vulnerability has been resolved:
netem: fix return value if duplicate enqueue fails
There is a bug in netem_enqueue() introduced by
commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
that can lead to a use-after-free.
This commit made netem_enqueue() always return NET_XMIT_SUCCESS
when a packet is duplicated, which can cause the parent qdisc's q.qlen
to be mistakenly incremented. When this happens qlen_notify() may be
skipped on the parent during destruction, leaving a dangling pointer
for some classful qdiscs like DRR.
There are two ways for the bug happen:
- If the duplicated packet is dropped by rootq->enqueue() and then
the original packet is also dropped.
- If rootq->enqueue() sends the duplicated packet to a different qdisc
and the original packet is dropped.
In both cases NET_XMIT_SUCCESS is returned even though no packets
are enqueued at the netem qdisc.
The fix is to defer the enqueue of the duplicate packet until after
the original packet has been guaranteed to return NET_XMIT_SUCCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix null pointer deref in bond_ipsec_offload_ok
We must check if there is an active slave before dereferencing the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix xfrm real_dev null pointer dereference
We shouldn't set real_dev to NULL because packets can be in transit and
xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume
real_dev is set.
Example trace:
kernel: BUG: unable to handle page fault for address: 0000000000001030
kernel: bond0: (slave eni0np1): making interface the new active one
kernel: #PF: supervisor write access in kernel mode
kernel: #PF: error_code(0x0002) - not-present page
kernel: PGD 0 P4D 0
kernel: Oops: 0002 [#1] PREEMPT SMP
kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12
kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim]
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f
kernel: bond0: (slave eni0np1): making interface the new active one
kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel:
kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60
kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00
kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014
kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000
kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000
kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0
kernel: bond0: (slave eni0np1): making interface the new active one
kernel: Call Trace:
kernel: <TASK>
kernel: ? __die+0x1f/0x60
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel: ? page_fault_oops+0x142/0x4c0
kernel: ? do_user_addr_fault+0x65/0x670
kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50
kernel: bond0: (slave eni0np1): making interface the new active one
kernel: ? exc_page_fault+0x7b/0x180
kernel: ? asm_exc_page_fault+0x22/0x30
kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim]
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim]
kernel: bond0: (slave eni0np1): making interface the new active one
kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding]
kernel: xfrm_output+0x61/0x3b0
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel: ip_push_pending_frames+0x56/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent UAF in ip6_send_skb()
syzbot reported an UAF in ip6_send_skb() [1]
After ip6_local_out() has returned, we no longer can safely
dereference rt, unless we hold rcu_read_lock().
A similar issue has been fixed in commit
a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()")
Another potential issue in ip6_finish_output2() is handled in a
separate patch.
[1]
BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964
Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530
CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964
rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588
rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
sock_write_iter+0x2dd/0x400 net/socket.c:1160
do_iter_readv_writev+0x60a/0x890
vfs_writev+0x37c/0xbb0 fs/read_write.c:971
do_writev+0x1b1/0x350 fs/read_write.c:1018
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f936bf79e79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79
RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004
RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8
</TASK>
Allocated by task 6530:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:312 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3988 [inline]
slab_alloc_node mm/slub.c:4037 [inline]
kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044
dst_alloc+0x12b/0x190 net/core/dst.c:89
ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670
make_blackhole net/xfrm/xfrm_policy.c:3120 [inline]
xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313
ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257
rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2597
___sys_sendmsg net/socket.c:2651 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 45:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
__kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2252 [inline]
slab_free mm/slub.c:4473 [inline]
kmem_cache_free+0x145/0x350 mm/slub.c:4548
dst_destroy+0x2ac/0x460 net/core/dst.c:124
rcu_do_batch kernel/rcu/tree.c:2569 [inline]
rcu_core+0xafd/0x1830 kernel/rcu/tree.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: core: Check for unset descriptor
Make sure the descriptor has been set before looking at maxpacket.
This fixes a null pointer panic in this case.
This may happen if the gadget doesn't properly set up the endpoint
for the current speed, or the gadget descriptors are malformed and
the descriptor for the speed/endpoint are not found.
No current gadget driver is known to have this problem, but this
may cause a hard-to-find bug during development of new gadgets. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mtrr: Check if fixed MTRRs exist before saving them
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use helper function to calculate expect ID
Delete expectation path is missing a call to the nf_expect_get_id()
helper function to calculate the expectation ID, otherwise LSB of the
expectation object address is leaked to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: Fix null-ptr-deref in reuseport_add_sock().
syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in
reuseport_add_sock(). [0]
The repro first creates a listener with SO_REUSEPORT. Then, it creates
another listener on the same port and concurrently closes the first
listener.
The second listen() calls reuseport_add_sock() with the first listener as
sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,
but the close() does clear it by reuseport_detach_sock().
The problem is SCTP does not properly synchronise reuseport_alloc(),
reuseport_add_sock(), and reuseport_detach_sock().
The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must
provide synchronisation for sockets that are classified into the same
reuseport group.
Otherwise, such sockets form multiple identical reuseport groups, and
all groups except one would be silently dead.
1. Two sockets call listen() concurrently
2. No socket in the same group found in sctp_ep_hashtable[]
3. Two sockets call reuseport_alloc() and form two reuseport groups
4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives
incoming packets
Also, the reported null-ptr-deref could occur.
TCP/UDP guarantees that would not happen by holding the hash bucket lock.
Let's apply the locking strategy to __sctp_hash_endpoint() and
__sctp_unhash_endpoint().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350
Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14
RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012
RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385
R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__sctp_hash_endpoint net/sctp/input.c:762 [inline]
sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790
sctp_listen_start net/sctp/socket.c:8570 [inline]
sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625
__sys_listen_socket net/socket.c:1883 [inline]
__sys_listen+0x1b7/0x230 net/socket.c:1894
__do_sys_listen net/socket.c:1902 [inline]
__se_sys_listen net/socket.c:1900 [inline]
__x64_sys_listen+0x5a/0x70 net/socket.c:1900
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f24e46039b9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9
RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004
RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0
R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c
R13:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: check uartclk for zero to avoid divide by zero
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
(discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Rule: add |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix overflow in get_free_elt()
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.
Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt". |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.
[ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
[ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
[ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
[ 10.017908] Workqueue: events_unbound padata_mt_helper
[ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
:
[ 10.017963] Call Trace:
[ 10.017968] <TASK>
[ 10.018004] ? padata_mt_helper+0x39/0xb0
[ 10.018084] process_one_work+0x174/0x330
[ 10.018093] worker_thread+0x266/0x3a0
[ 10.018111] kthread+0xcf/0x100
[ 10.018124] ret_from_fork+0x31/0x50
[ 10.018138] ret_from_fork_asm+0x1a/0x30
[ 10.018147] </TASK>
Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0. The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.
Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: Fix ToCToU between perm check and set-uid/gid usage
When opening a file for exec via do_filp_open(), permission checking is
done against the file's metadata at that moment, and on success, a file
pointer is passed back. Much later in the execve() code path, the file
metadata (specifically mode, uid, and gid) is used to determine if/how
to set the uid and gid. However, those values may have changed since the
permissions check, meaning the execution may gain unintended privileges.
For example, if a file could change permissions from executable and not
set-id:
---------x 1 root root 16048 Aug 7 13:16 target
to set-id and non-executable:
---S------ 1 root root 16048 Aug 7 13:16 target
it is possible to gain root privileges when execution should have been
disallowed.
While this race condition is rare in real-world scenarios, it has been
observed (and proven exploitable) when package managers are updating
the setuid bits of installed programs. Such files start with being
world-executable but then are adjusted to be group-exec with a set-uid
bit. For example, "chmod o-x,u+s target" makes "target" executable only
by uid "root" and gid "cdrom", while also becoming setuid-root:
-rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target
becomes:
-rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target
But racing the chmod means users without group "cdrom" membership can
get the permission to execute "target" just before the chmod, and when
the chmod finishes, the exec reaches brpm_fill_uid(), and performs the
setuid to root, violating the expressed authorization of "only cdrom
group members can setuid to root".
Re-check that we still have execute permissions in case the metadata
has changed. It would be better to keep a copy from the perm-check time,
but until we can do that refactoring, the least-bad option is to do a
full inode_permission() call (under inode lock). It is understood that
this is safe against dead-locks, but hardly optimal. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he()
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in
cfg80211_calculate_bitrate_he(), leading to below warning:
kernel: invalid HE MCS: bw:6, ru:6
kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211]
Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. |
| In the Linux kernel, the following vulnerability has been resolved:
devres: Fix memory leakage caused by driver API devm_free_percpu()
It will cause memory leakage when use driver API devm_free_percpu()
to free memory allocated by devm_alloc_percpu(), fixed by using
devres_release() instead of devres_destroy() within devm_free_percpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix array-index-out-of-bounds in diFree |
