| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HCL BigFix AEX is affected by a Remote Code Execution Vulnerability . It may allow attackers to execute code with the privileges of the affected application or service, potentially leading to unauthorized access, data exposure, or system compromise. |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: E1 Dev Platform Tech - UNIX). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where JD Edwards EnterpriseOne Tools executes to compromise JD Edwards EnterpriseOne Tools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 6.7 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H). |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Enterprise Infrastructure SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where JD Edwards EnterpriseOne Tools executes to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all JD Edwards EnterpriseOne Tools accessible data as well as unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Tools accessible data. CVSS 3.1 Base Score 6.3 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Enterprise Infrastructure SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows unauthenticated attacker with network access via SMTP to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of JD Edwards EnterpriseOne Tools accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 4.8 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:L). |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Enterprise Infrastructure SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where JD Edwards EnterpriseOne Tools executes to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in takeover of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Enterprise Infrastructure SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows low privileged attacker with network access via JDENET to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in takeover of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Database and Comm SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Easily exploitable vulnerability allows low privileged attacker with network access via JDENET to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in takeover of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Cross-Site Request Forgery (CSRF) vulnerability in Booknetic Booknetic booknetic allows Cross Site Request Forgery.This issue affects Booknetic: from n/a before 5.10.4. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Harden DMC firmware payload parsing
Validate the conversion of the DMC firmware size from dwords to bytes
using check_mul_overflow() before calculating the firmware payload size.
Reject zero-length payloads and zero MMIO counts in the DMC firmware
header so malformed firmware is caught early. Also set dmc_fw_size only
after the payload allocation succeeds.
(cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes
When running Hyper-V from Windows 11, KVM is seeing the SS bit set
in nested page fault error codes produced for shadowed NPT. The AMD
manual is unclear about when SS is set, including whether it can be set
when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field
of the VMCB.
Nevertheless, the unexpected SS bit causes out of bounds accesses in
permission_fault(), seen as either WARNs or UBSAN reports:
kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27
kernel: index 34 is out of range for type 'u16 [16]'
(in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the
report shows SS|U|W happening as well). Fix the handling of unknown
error codes by dropping SS and (with a WARN) any bits not among those
that permission_fault() expects to receive.
At the same time, given the uncertainty about when hardware sets SS,
follow the processor's behavior when constructing the fault's error
code, and preserve the SS bit as passed to FNAME(walk_addr_generic).
While the behavior is surprising, there's a possibility that Hyper-V
expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!),
so retain the information when reflecting the fault to L1 instead of
unconditionally discarding it.
Bisection shows that this started happening with commit 687ee95c1b6d ("KVM:
nSVM: enable GMET for guests"), even though SHSTK was available to guests
since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET)
somehow enables reporting the SS bit; rather, it's simply that Hyper-V
never uses CET unless GMET is also present. The WARN is reproducible
even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase
to ensure that the first access to the shadow stack triggers a page fault. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: validate packet source for connected sockets
vmci_transport_recv_stream_cb() looks up sockets first by the full source
and destination tuple, then by destination only in the bound table. The
fallback can select a non-listening socket without checking whether the
packet came from its stored peer.
This was reproduced with two VMCI contexts. A RST from the context not
stored in a TCP_SYN_SENT socket reset that socket after it was selected by
the destination-only lookup.
VMCI can process notification packets in bottom-half context when the
socket is not owned by user context, or defer packets to a workqueue. Use
vsock_check_source() after taking the socket lock in the bottom-half path,
and recheck after lock_sock() in the workqueue path. Listening sockets
continue to accept packets from any source.
Reply with a RST addressed from the received packet before dropping a
source that fails validation. This preserves the existing reset behavior
for bound non-listening and concurrently closed sockets without directing
the reset to a connected socket's stored peer. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Handle multiple PMU stop callback invocations
Handle the following scenario:
The kernel protects itself against a very high sampling load and
throttles the sampling using:
perf_event_throttle() --> PMU->stop()
Shortly later the scheduler may terminate the task and removes it from the
CPU. It again calls
PMU->stop()
which results in two invocations of PMU->stop() called back to back.
Protect against this and check the PERF_HES_STOPPED bit on function
entry. If it is already set return.
Clear bit PERF_HES_STOPPED in PMU->start().
Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event.
It sets perf_event::event_limit to a positive value and causes
perf_event_overflow() to invoke pai_stop() call back function when
perf_event::event_limit hits zero. This is not supported because the
sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out
of a task.
Use list_for_each_entry_safe() for safe iteration over syswide_list
in pai_have_samples(). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor
scx_bypass() claims bypass dispatch when the scheduler's depth goes from
zero to one and releases it when the depth returns to zero, but propagates
only the depth to the descendants, not the claim. A descendant that starts
bypassing with its ancestor never claims, and one whose own bypass ends
under the ancestor's keeps its claim, as its depth does not return to zero.
A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its
claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next
bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that
starts under a PM suspend has no claim, so once the resume lifts the root's
bypass its tasks sit on the parent's bypass DSQs with nobody consuming them.
Claim for every descendant whose depth goes from zero to one in the
propagation and release every scheduler in the subtree whose depth returned
to zero once the tasks have moved out of the bypass DSQs. A parent that is
bypassing itself when a descendant claims consumes only its own bypass DSQs,
empty until it leaves bypass and becomes the host. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context
An async #PF "page not present" event arrives through the #PF vector,
and its reason sits in the per-CPU apf_reason.flags until
__kvm_handle_async_pf() reads and clears it. If an NMI arrives after
the event is injected and before the #PF handler reads the flags, and
the NMI handler itself takes a #PF, that fault reads and clears the
flags belonging to the #PF it interrupted. It then finds interrupts
disabled in the NMI context it interrupted, and panics:
Kernel panic - not syncing: Host injected async #PF in interrupt
disabled region
Call Trace:
<NMI>
panic+0x52/0x60
__kvm_handle_async_pf+0xb0/0xb0
exc_page_fault+0x71/0xb0
asm_exc_page_fault+0x27/0x30
RIP: 0010:__get_user_nocheck_8+0x6/0x20
perf_callchain_user+0x147/0x1a0
get_perf_callchain+0x12d/0x1c0
...
perf_event_nmi_handler+0x26/0x50
exc_nmi+0xe8/0x110
RIP: 0010:asm_exc_page_fault+0x0/0x30
</NMI>
The last RIP line shows the NMI landing on the first instruction of
the #PF entry. perf with user call chains takes such a fault: the
sampling NMI walks the user stack with __get_user(), which faults when
a saved frame pointer is not a valid user address or the walk runs off
the top of the stack. The same window exists when KVM, running as an
L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after
a #PF VM-exit.
The NMI entry code saves and restores CR2 for this nesting, but not the
async #PF reason. Andy Lutomirski described the race, with perf as the
example, when async #PF delivery was reworked in 2020 [1]. Saving and
clearing the flags across the NMI, next to CR2, was discussed there but
not merged.
Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS,
so the host delivers "page not present" only for user mode faults and
a kernel-mode fault in NMI context (including kernel-mode #MC and #DB)
cannot be an async page fault. In that case, return without touching
the flags so that the interrupted handler finds them intact.
Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot
whose memory is served on demand through userfaultfd, so that reading
it back takes async #PFs, while every thread samples hardware cycles
with user call chains and points its frame pointer at an unmapped page.
Without this patch the guest panicked as above in 3 of 3 runs. With it,
the guest survived 3 of 3 runs of 60 seconds, and the host counted
148,441 to 153,334 kvm_async_pf_not_present events in the first 20
seconds of each. On 6.18.50 the results were the same: the guest
panicked without the patch and survived with it. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.8, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| Sensitive information disclosure due to insufficiently protected credentials. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 42587. |
| Sensitive information disclosure due to improper token validation. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 42587. |
| Sensitive information disclosure due to improper token validation. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 42587. |
| Dell PowerProtect Data Domain Management Center, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain a Missing Authorization vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized system operation on managed systems. |
| Some of our API endpoints allowed to create order payments referencing a gift card by using the auto-incremented internal ID. This ID was not checked and allowed creating payments that reference gift cards from different organizers and thereby obtaining their secret. The gift card is not charged in this case, but by then triggering a refund on the payment, one can increase the value of the gift card. |
