| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: Fix possible UAF
This fixes the following trace caused by not dropping l2cap_conn
reference when user->remove callback is called:
[ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00
[ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 97.809947] Call Trace:
[ 97.809954] <TASK>
[ 97.809961] dump_stack_lvl (lib/dump_stack.c:122)
[ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798)
[ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1))
[ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341)
[ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2))
[ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360)
[ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285)
[ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5))
[ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716)
[ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691)
[ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678)
[ 97.810404] __fput (fs/file_table.c:470)
[ 97.810430] task_work_run (kernel/task_work.c:235)
[ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201)
[ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5))
[ 97.810527] do_exit (kernel/exit.c:972)
[ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810574] ? __pfx_do_exit (kernel/exit.c:897)
[ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 97.810721] do_group_exit (kernel/exit.c:1093)
[ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1))
[ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366)
[ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810826] ? vfs_read (fs/read_write.c:555)
[ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800)
[ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555)
[ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810960] arch_do_signal_or_restart (arch/
---truncated--- |
| Juju is an open source application orchestration engine that enables any application operation on any infrastructure at any scale through special operators called ‘charms’. From versions 2.9 to before 2.9.56 and 3.6 to before 3.6.19, it is possible that a compromised workload machine under a Juju controller can read any log file for any entity in any model at any level. This issue has been patched in versions 2.9.56 and 3.6.19. |
| Juju is an open source application orchestration engine that enables any application operation on any infrastructure at any scale through special operators called ‘charms’. From versions 2.9 to before 2.9.56 and 3.6 to before 3.6.19, any authenticated user, machine or controller under a Juju controller can modify the resources of an application within the entire controller. This issue has been patched in versions 2.9.56 and 3.6.19. |
| FastMCP is the standard framework for building MCP applications. Prior to version 3.2.0, server names containing shell metacharacters (e.g., &) can cause command injection on Windows when passed to fastmcp install claude-code or fastmcp install gemini-cli. These install paths use subprocess.run() with a list argument, but on Windows the target CLIs often resolve to .cmd wrappers that are executed through cmd.exe, which interprets metacharacters in the flattened command string. This issue has been patched in version 3.2.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of share_conf in compound request
smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without
validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state ==
TREE_CONNECTED on the initial lookup path, but the compound reuse path
bypasses this check entirely.
If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state
to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(),
subsequent commands dereference the freed share_conf through
work->tcon->share_conf.
KASAN report:
[ 4.144653] ==================================================================
[ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70
[ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44
[ 4.145772]
[ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY
[ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work
[ 4.145888] Call Trace:
[ 4.145892] <TASK>
[ 4.145894] dump_stack_lvl+0x64/0x80
[ 4.145910] print_report+0xce/0x660
[ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 4.145928] ? smb2_write+0xc74/0xe70
[ 4.145931] kasan_report+0xce/0x100
[ 4.145934] ? smb2_write+0xc74/0xe70
[ 4.145937] smb2_write+0xc74/0xe70
[ 4.145939] ? __pfx_smb2_write+0x10/0x10
[ 4.145942] ? _raw_spin_unlock+0xe/0x30
[ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 4.145948] ? smb2_tree_disconnect+0x31c/0x480
[ 4.145951] handle_ksmbd_work+0x40f/0x1080
[ 4.145953] process_one_work+0x5fa/0xef0
[ 4.145962] ? assign_work+0x122/0x3e0
[ 4.145964] worker_thread+0x54b/0xf70
[ 4.145967] ? __pfx_worker_thread+0x10/0x10
[ 4.145970] kthread+0x346/0x470
[ 4.145976] ? recalc_sigpending+0x19b/0x230
[ 4.145980] ? __pfx_kthread+0x10/0x10
[ 4.145984] ret_from_fork+0x4fb/0x6c0
[ 4.145992] ? __pfx_ret_from_fork+0x10/0x10
[ 4.145995] ? __switch_to+0x36c/0xbe0
[ 4.145999] ? __pfx_kthread+0x10/0x10
[ 4.146003] ret_from_fork_asm+0x1a/0x30
[ 4.146013] </TASK>
[ 4.146014]
[ 4.149858] Allocated by task 44:
[ 4.149953] kasan_save_stack+0x33/0x60
[ 4.150061] kasan_save_track+0x14/0x30
[ 4.150169] __kasan_kmalloc+0x8f/0xa0
[ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0
[ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600
[ 4.150529] smb2_tree_connect+0x2e6/0x1000
[ 4.150645] handle_ksmbd_work+0x40f/0x1080
[ 4.150761] process_one_work+0x5fa/0xef0
[ 4.150873] worker_thread+0x54b/0xf70
[ 4.150978] kthread+0x346/0x470
[ 4.151071] ret_from_fork+0x4fb/0x6c0
[ 4.151176] ret_from_fork_asm+0x1a/0x30
[ 4.151286]
[ 4.151332] Freed by task 44:
[ 4.151418] kasan_save_stack+0x33/0x60
[ 4.151526] kasan_save_track+0x14/0x30
[ 4.151634] kasan_save_free_info+0x3b/0x60
[ 4.151751] __kasan_slab_free+0x43/0x70
[ 4.151861] kfree+0x1ca/0x430
[ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190
[ 4.152088] smb2_tree_disconnect+0x1cd/0x480
[ 4.152211] handle_ksmbd_work+0x40f/0x1080
[ 4.152326] process_one_work+0x5fa/0xef0
[ 4.152438] worker_thread+0x54b/0xf70
[ 4.152545] kthread+0x346/0x470
[ 4.152638] ret_from_fork+0x4fb/0x6c0
[ 4.152743] ret_from_fork_asm+0x1a/0x30
[ 4.152853]
[ 4.152900] The buggy address belongs to the object at ffff88810430c180
[ 4.152900] which belongs to the cache kmalloc-96 of size 96
[ 4.153226] The buggy address is located 20 bytes inside of
[ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0)
[ 4.153549]
[ 4.153596] The buggy address belongs to the physical page:
[ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c
[ 4.154000] flags: 0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: add NULL checks for idev in SRv6 paths
__in6_dev_get() can return NULL when the device has no IPv6 configuration
(e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER).
Add NULL checks for idev returned by __in6_dev_get() in both
seg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULL
pointer dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix previous acpi_processor_errata_piix4() fix
After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference
in acpi_processor_errata_piix4()"), device pointers may be dereferenced
after dropping references to the device objects pointed to by them,
which may cause a use-after-free to occur.
Moreover, debug messages about enabling the errata may be printed
if the errata flags corresponding to them are unset.
Address all of these issues by moving message printing to the points
in the code where the errata flags are set. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case
In decode_int(), the CONS case calls get_bits(bs, 2) to read a length
value, then calls get_uint(bs, len) without checking that len bytes
remain in the buffer. The existing boundary check only validates the
2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint()
reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte
slab-out-of-bounds read.
Add a boundary check for len bytes after get_bits() and before
get_uint(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver. |
| A vulnerability was found in NASA cFS up to 7.0.0. This affects the function CFE_MSG_GetSize of the file apps/to_lab/fsw/src/to_lab_passthru_encode.c of the component CCSDS Packet Header Handler. Performing a manipulation results in heap-based buffer overflow. The attacker must have access to the local network to execute the attack. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in NASA cFS up to 7.0.0. The impacted element is the function pickle.load of the component Pickle Module. Such manipulation leads to deserialization. The attack needs to be performed locally. The attack requires a high level of complexity. The exploitability is regarded as difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in ProjectsAndPrograms School Management System up to 6b6fae5426044f89c08d0dd101c7fa71f9042a59. The affected element is an unknown function of the file /admin_panel/settings.php of the component Profile Picture Handler. This manipulation of the argument File causes unrestricted upload. Remote exploitation of the attack is possible. The exploit has been published and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. |
| A security vulnerability has been detected in mixelpixx Google-Research-MCP 1e062d7bd887bfe5f6e582b6cc288bb897b35cf2/ca613b736ab787bc926932f59cddc69457185a83. This issue affects the function extractContent of the file src/services/content-extractor.service.ts of the component Model Context Protocol Handler. The manipulation of the argument URL leads to server-side request forgery. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in NASA cFS up to 7.0.0. This impacts the function CFE_SB_TransmitMsg of the file cfe_sb_priv.c of the component CCSDS Header Size Handler. Executing a manipulation can lead to memory corruption. The project was informed of the problem early through an issue report but has not responded yet. |
| Improper certificate validation in the identity provider connection components in Amazon Athena ODBC driver before 2.1.0.0 might allow a man-in-the-middle threat actor to intercept authentication credentials due to insufficient default transport security when connecting to identity providers. This only applies to connections with external identity providers and does not apply to connections with Athena.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.16 and prior, a local unprivileged user can coerce cupsd into authenticating to an attacker-controlled localhost IPP service with a reusable Authorization: Local ... token. That token is enough to drive /admin/ requests on localhost, and the attacker can combine CUPS-Create-Local-Printer with printer-is-shared=true to persist a file:///... queue even though the normal FileDevice policy rejects such URIs. Printing to that queue gives an arbitrary root file overwrite; the PoC below uses that primitive to drop a sudoers fragment and demonstrate root command execution. At time of publication, there are no publicly available patches. |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.16 and prior, in a network-exposed cupsd with a shared target queue, an unauthorized client can send a Print-Job to that shared PostScript queue without authentication. The server accepts a page-border value supplied as textWithoutLanguage, preserves an embedded newline through option escaping and reparse, and then reparses the resulting second-line PPD: text as a trusted scheduler control record. A follow-up raw print job can therefore make the server execute an attacker-chosen existing binary such as /usr/bin/vim as lp. At time of publication, there are no publicly available patches. |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.16 and prior, the RSS notifier allows .. path traversal in notify-recipient-uri (e.g., rss:///../job.cache), letting a remote IPP client write RSS XML bytes outside CacheDir/rss (anywhere that is lp-writable). In particular, because CacheDir is group-writable by default (typically root:lp and mode 0770), the notifier (running as lp) can replace root-managed state files via temp-file + rename(). This PoC clobbers CacheDir/job.cache with RSS XML, and after restarting cupsd the scheduler fails to parse the job cache and previously queued jobs disappear. At time of publication, there are no publicly available patches. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.1, 40.8.1, and 41.0.0, when an iframe requests fullscreen, pointerLock, keyboardLock, openExternal, or media permissions, the origin passed to session.setPermissionRequestHandler() was the top-level page's origin rather than the requesting iframe's origin. Apps that grant permissions based on the origin parameter or webContents.getURL() may inadvertently grant permissions to embedded third-party content. The correct requesting URL remains available via details.requestingUrl. Apps that already check details.requestingUrl are not affected. This issue has been patched in versions 38.8.6, 39.8.1, 40.8.1, and 41.0.0. |
