| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: phylink: add lock for serializing concurrent pl->phydev writes with resolver
Currently phylink_resolve() protects itself against concurrent
phylink_bringup_phy() or phylink_disconnect_phy() calls which modify
pl->phydev by relying on pl->state_mutex.
The problem is that in phylink_resolve(), pl->state_mutex is in a lock
inversion state with pl->phydev->lock. So pl->phydev->lock needs to be
acquired prior to pl->state_mutex. But that requires dereferencing
pl->phydev in the first place, and without pl->state_mutex, that is
racy.
Hence the reason for the extra lock. Currently it is redundant, but it
will serve a functional purpose once mutex_lock(&phy->lock) will be
moved outside of the mutex_lock(&pl->state_mutex) section.
Another alternative considered would have been to let phylink_resolve()
acquire the rtnl_mutex, which is also held when phylink_bringup_phy()
and phylink_disconnect_phy() are called. But since phylink_disconnect_phy()
runs under rtnl_lock(), it would deadlock with phylink_resolve() when
calling flush_work(&pl->resolve). Additionally, it would have been
undesirable because it would have unnecessarily blocked many other call
paths as well in the entire kernel, so the smaller-scoped lock was
preferred. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race issue between cpu buffer write and swap
Warning happened in rb_end_commit() at code:
if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)))
WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142
rb_commit+0x402/0x4a0
Call Trace:
ring_buffer_unlock_commit+0x42/0x250
trace_buffer_unlock_commit_regs+0x3b/0x250
trace_event_buffer_commit+0xe5/0x440
trace_event_buffer_reserve+0x11c/0x150
trace_event_raw_event_sched_switch+0x23c/0x2c0
__traceiter_sched_switch+0x59/0x80
__schedule+0x72b/0x1580
schedule+0x92/0x120
worker_thread+0xa0/0x6f0
It is because the race between writing event into cpu buffer and swapping
cpu buffer through file per_cpu/cpu0/snapshot:
Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1
-------- --------
tracing_snapshot_write()
[...]
ring_buffer_lock_reserve()
cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a';
[...]
rb_reserve_next_event()
[...]
ring_buffer_swap_cpu()
if (local_read(&cpu_buffer_a->committing))
goto out_dec;
if (local_read(&cpu_buffer_b->committing))
goto out_dec;
buffer_a->buffers[cpu] = cpu_buffer_b;
buffer_b->buffers[cpu] = cpu_buffer_a;
// 2. cpu_buffer has swapped here.
rb_start_commit(cpu_buffer);
if (unlikely(READ_ONCE(cpu_buffer->buffer)
!= buffer)) { // 3. This check passed due to 'cpu_buffer->buffer'
[...] // has not changed here.
return NULL;
}
cpu_buffer_b->buffer = buffer_a;
cpu_buffer_a->buffer = buffer_b;
[...]
// 4. Reserve event from 'cpu_buffer_a'.
ring_buffer_unlock_commit()
[...]
cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!!
rb_commit(cpu_buffer)
rb_end_commit() // 6. WARN for the wrong 'committing' state !!!
Based on above analysis, we can easily reproduce by following testcase:
``` bash
#!/bin/bash
dmesg -n 7
sysctl -w kernel.panic_on_warn=1
TR=/sys/kernel/tracing
echo 7 > ${TR}/buffer_size_kb
echo "sched:sched_switch" > ${TR}/set_event
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
```
To fix it, IIUC, we can use smp_call_function_single() to do the swap on
the target cpu where the buffer is located, so that above race would be
avoided. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential data race in rxrpc_wait_to_be_connected()
Inside the loop in rxrpc_wait_to_be_connected() it checks call->error to
see if it should exit the loop without first checking the call state. This
is probably safe as if call->error is set, the call is dead anyway, but we
should probably wait for the call state to have been set to completion
first, lest it cause surprise on the way out.
Fix this by only accessing call->error if the call is complete. We don't
actually need to access the error inside the loop as we'll do that after.
This caused the following report:
BUG: KCSAN: data-race in rxrpc_send_data / rxrpc_set_call_completion
write to 0xffff888159cf3c50 of 4 bytes by task 25673 on cpu 1:
rxrpc_set_call_completion+0x71/0x1c0 net/rxrpc/call_state.c:22
rxrpc_send_data_packet+0xba9/0x1650 net/rxrpc/output.c:479
rxrpc_transmit_one+0x1e/0x130 net/rxrpc/output.c:714
rxrpc_decant_prepared_tx net/rxrpc/call_event.c:326 [inline]
rxrpc_transmit_some_data+0x496/0x600 net/rxrpc/call_event.c:350
rxrpc_input_call_event+0x564/0x1220 net/rxrpc/call_event.c:464
rxrpc_io_thread+0x307/0x1d80 net/rxrpc/io_thread.c:461
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
read to 0xffff888159cf3c50 of 4 bytes by task 25672 on cpu 0:
rxrpc_send_data+0x29e/0x1950 net/rxrpc/sendmsg.c:296
rxrpc_do_sendmsg+0xb7a/0xc20 net/rxrpc/sendmsg.c:726
rxrpc_sendmsg+0x413/0x520 net/rxrpc/af_rxrpc.c:565
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2501
___sys_sendmsg net/socket.c:2555 [inline]
__sys_sendmmsg+0x263/0x500 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00000000 -> 0xffffffea |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: fix data race with the pwq->stats[] increment
KCSAN has discovered a data race in kernel/workqueue.c:2598:
[ 1863.554079] ==================================================================
[ 1863.554118] BUG: KCSAN: data-race in process_one_work / process_one_work
[ 1863.554142] write to 0xffff963d99d79998 of 8 bytes by task 5394 on cpu 27:
[ 1863.554154] process_one_work (kernel/workqueue.c:2598)
[ 1863.554166] worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2752)
[ 1863.554177] kthread (kernel/kthread.c:389)
[ 1863.554186] ret_from_fork (arch/x86/kernel/process.c:145)
[ 1863.554197] ret_from_fork_asm (arch/x86/entry/entry_64.S:312)
[ 1863.554213] read to 0xffff963d99d79998 of 8 bytes by task 5450 on cpu 12:
[ 1863.554224] process_one_work (kernel/workqueue.c:2598)
[ 1863.554235] worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2752)
[ 1863.554247] kthread (kernel/kthread.c:389)
[ 1863.554255] ret_from_fork (arch/x86/kernel/process.c:145)
[ 1863.554266] ret_from_fork_asm (arch/x86/entry/entry_64.S:312)
[ 1863.554280] value changed: 0x0000000000001766 -> 0x000000000000176a
[ 1863.554295] Reported by Kernel Concurrency Sanitizer on:
[ 1863.554303] CPU: 12 PID: 5450 Comm: kworker/u64:1 Tainted: G L 6.5.0-rc6+ #44
[ 1863.554314] Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
[ 1863.554322] Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
[ 1863.554941] ==================================================================
lockdep_invariant_state(true);
→ pwq->stats[PWQ_STAT_STARTED]++;
trace_workqueue_execute_start(work);
worker->current_func(work);
Moving pwq->stats[PWQ_STAT_STARTED]++; before the line
raw_spin_unlock_irq(&pool->lock);
resolves the data race without performance penalty.
KCSAN detected at least one additional data race:
[ 157.834751] ==================================================================
[ 157.834770] BUG: KCSAN: data-race in process_one_work / process_one_work
[ 157.834793] write to 0xffff9934453f77a0 of 8 bytes by task 468 on cpu 29:
[ 157.834804] process_one_work (/home/marvin/linux/kernel/linux_torvalds/kernel/workqueue.c:2606)
[ 157.834815] worker_thread (/home/marvin/linux/kernel/linux_torvalds/./include/linux/list.h:292 /home/marvin/linux/kernel/linux_torvalds/kernel/workqueue.c:2752)
[ 157.834826] kthread (/home/marvin/linux/kernel/linux_torvalds/kernel/kthread.c:389)
[ 157.834834] ret_from_fork (/home/marvin/linux/kernel/linux_torvalds/arch/x86/kernel/process.c:145)
[ 157.834845] ret_from_fork_asm (/home/marvin/linux/kernel/linux_torvalds/arch/x86/entry/entry_64.S:312)
[ 157.834859] read to 0xffff9934453f77a0 of 8 bytes by task 214 on cpu 7:
[ 157.834868] process_one_work (/home/marvin/linux/kernel/linux_torvalds/kernel/workqueue.c:2606)
[ 157.834879] worker_thread (/home/marvin/linux/kernel/linux_torvalds/./include/linux/list.h:292 /home/marvin/linux/kernel/linux_torvalds/kernel/workqueue.c:2752)
[ 157.834890] kthread (/home/marvin/linux/kernel/linux_torvalds/kernel/kthread.c:389)
[ 157.834897] ret_from_fork (/home/marvin/linux/kernel/linux_torvalds/arch/x86/kernel/process.c:145)
[ 157.834907] ret_from_fork_asm (/home/marvin/linux/kernel/linux_torvalds/arch/x86/entry/entry_64.S:312)
[ 157.834920] value changed: 0x000000000000052a -> 0x0000000000000532
[ 157.834933] Reported by Kernel Concurrency Sanitizer on:
[ 157.834941] CPU: 7 PID: 214 Comm: kworker/u64:2 Tainted: G L 6.5.0-rc7-kcsan-00169-g81eaf55a60fc #4
[ 157.834951] Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
[ 157.834958] Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
[ 157.835567] ==================================================================
in code:
trace_workqueue_execute_end(work, worker->current_func);
→ pwq->stats[PWQ_STAT_COM
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: axp288_fuel_gauge: Fix external_power_changed race
fuel_gauge_external_power_changed() dereferences info->bat,
which gets sets in axp288_fuel_gauge_probe() like this:
info->bat = devm_power_supply_register(dev, &fuel_gauge_desc, &psy_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where fuel_gauge_external_power_changed() may get called while
info->bat has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in info->bat,
so fuel_gauge_external_power_changed() can simply directly use
the passed in psy argument which is always valid. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix race between quota enable and quota rescan ioctl
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error. |
| A concurrent execution using shared resource with improper synchronization ('Race Condition') vulnerability [CWE-362] in Fortinet FortiAnalyzer version 7.6.0 through 7.6.2, 7.4.0 through 7.4.6, 7.2.0 through 7.2.10 and before 7.0.13 allows an attacker to attempt to win a race condition to bypass the FortiCloud SSO authorization via crafted FortiCloud SSO requests. |
| In aee daemon, there is a possible system crash due to a race condition. This could lead to local denial of service if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10190802; Issue ID: MSV-4833. |
| An issue was discovered in the Camera in Samsung Mobile Processor and Wearable Processor Exynos 1330, 1380, 1480, 2400, 1580, 2500. A race condition in the issimian device driver results in an out-of-bounds access, leading to a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
Deleting an NPIV instance requires all fabric ndlps to be released before
an NPIV's resources can be torn down. Failure to release fabric ndlps
beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID
to complete synchronously with usage of wait_queue. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: scrub: handle RST lookup error correctly
[BUG]
When running btrfs/060 with forced RST feature, it would crash the
following ASSERT() inside scrub_read_endio():
ASSERT(sector_nr < stripe->nr_sectors);
Before that, we would have tree dump from
btrfs_get_raid_extent_offset(), as we failed to find the RST entry for
the range.
[CAUSE]
Inside scrub_submit_extent_sector_read() every time we allocated a new
bbio we immediately called btrfs_map_block() to make sure there was some
RST range covering the scrub target.
But if btrfs_map_block() fails, we immediately call endio for the bbio,
while the bbio is newly allocated, it's completely empty.
Then inside scrub_read_endio(), we go through the bvecs to find
the sector number (as bi_sector is no longer reliable if the bio is
submitted to lower layers).
And since the bio is empty, such bvecs iteration would not find any
sector matching the sector, and return sector_nr == stripe->nr_sectors,
triggering the ASSERT().
[FIX]
Instead of calling btrfs_map_block() after allocating a new bbio, call
btrfs_map_block() first.
Since our only objective of calling btrfs_map_block() is only to update
stripe_len, there is really no need to do that after btrfs_alloc_bio().
This new timing would avoid the problem of handling empty bbio
completely, and in fact fixes a possible race window for the old code,
where if the submission thread is the only owner of the pending_io, the
scrub would never finish (since we didn't decrease the pending_io
counter).
Although the root cause of RST lookup failure still needs to be
addressed. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/PM: Drain runtime-idle callbacks before driver removal
A race condition between the .runtime_idle() callback and the .remove()
callback in the rtsx_pcr PCI driver leads to a kernel crash due to an
unhandled page fault [1].
The problem is that rtsx_pci_runtime_idle() is not expected to be running
after pm_runtime_get_sync() has been called, but the latter doesn't really
guarantee that. It only guarantees that the suspend and resume callbacks
will not be running when it returns.
However, if a .runtime_idle() callback is already running when
pm_runtime_get_sync() is called, the latter will notice that the runtime PM
status of the device is RPM_ACTIVE and it will return right away without
waiting for the former to complete. In fact, it cannot wait for
.runtime_idle() to complete because it may be called from that callback (it
arguably does not make much sense to do that, but it is not strictly
prohibited).
Thus in general, whoever is providing a .runtime_idle() callback needs
to protect it from running in parallel with whatever code runs after
pm_runtime_get_sync(). [Note that .runtime_idle() will not start after
pm_runtime_get_sync() has returned, but it may continue running then if it
has started earlier.]
One way to address that race condition is to call pm_runtime_barrier()
after pm_runtime_get_sync() (not before it, because a nonzero value of the
runtime PM usage counter is necessary to prevent runtime PM callbacks from
being invoked) to wait for the .runtime_idle() callback to complete should
it be running at that point. A suitable place for doing that is in
pci_device_remove() which calls pm_runtime_get_sync() before removing the
driver, so it may as well call pm_runtime_barrier() subsequently, which
will prevent the race in question from occurring, not just in the rtsx_pcr
driver, but in any PCI drivers providing .runtime_idle() callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: do not wait in vain when unloading module
The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.
There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.
If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.
While at it, remove the unused nvme_fc_wq workqueue too. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix IO hang from sbitmap wakeup race
In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered
with the following blk_mq_get_driver_tag() in case of getting driver
tag failure.
Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe
the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime
blk_mq_mark_tag_wait() can't get driver tag successfully.
This issue can be reproduced by running the following test in loop, and
fio hang can be observed in < 30min when running it on my test VM
in laptop.
modprobe -r scsi_debug
modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4
dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename`
fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \
--runtime=100 --numjobs=40 --time_based --name=test \
--ioengine=libaio
Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which
is just fine in case of running out of tag. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't abort filesystem when attempting to snapshot deleted subvolume
If the source file descriptor to the snapshot ioctl refers to a deleted
subvolume, we get the following abort:
BTRFS: Transaction aborted (error -2)
WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs]
Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c
CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs]
RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027
RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840
RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998
R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe
R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80
FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0
Call Trace:
<TASK>
? create_pending_snapshot+0x1040/0x1190 [btrfs]
? __warn+0x81/0x130
? create_pending_snapshot+0x1040/0x1190 [btrfs]
? report_bug+0x171/0x1a0
? handle_bug+0x3a/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? create_pending_snapshot+0x1040/0x1190 [btrfs]
? create_pending_snapshot+0x1040/0x1190 [btrfs]
create_pending_snapshots+0x92/0xc0 [btrfs]
btrfs_commit_transaction+0x66b/0xf40 [btrfs]
btrfs_mksubvol+0x301/0x4d0 [btrfs]
btrfs_mksnapshot+0x80/0xb0 [btrfs]
__btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs]
btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs]
btrfs_ioctl+0x8a6/0x2650 [btrfs]
? kmem_cache_free+0x22/0x340
? do_sys_openat2+0x97/0xe0
__x64_sys_ioctl+0x97/0xd0
do_syscall_64+0x46/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7fe20abe83af
RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af
RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry
BTRFS info (device vdc: state EA): forced readonly
BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction.
BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry
This happens because create_pending_snapshot() initializes the new root
item as a copy of the source root item. This includes the refs field,
which is 0 for a deleted subvolume. The call to btrfs_insert_root()
therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then
finds the root and returns -ENOENT if refs == 0, which causes
create_pending_snapshot() to abort.
Fix it by checking the source root's refs before attempting the
snapshot, but after locking subvol_sem to avoid racing with deletion. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN
syzbot reports a data-race when accessing the event_triggered, here is the
simplified stack when the issue occurred:
==================================================================
BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed
write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0:
virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653
start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264
__netdev_start_xmit include/linux/netdevice.h:5151 [inline]
netdev_start_xmit include/linux/netdevice.h:5160 [inline]
xmit_one net/core/dev.c:3800 [inline]
read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1:
virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline]
virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566
skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777
vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715
__handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158
handle_irq_event_percpu kernel/irq/handle.c:193 [inline]
value changed: 0x01 -> 0x00
==================================================================
When the data race occurs, the function virtqueue_enable_cb_delayed() sets
event_triggered to false, and virtqueue_disable_cb_split/packed() reads it
as false due to the race condition. Since event_triggered is an unreliable
hint used for optimization, this should only cause the driver temporarily
suggest that the device not send an interrupt notification when the event
index is used.
Fix this KCSAN reported data-race issue by explicitly tagging the access as
data_racy. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix warning in ext4_iomap_begin as race between bmap and write
We got issue as follows:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 9310 at fs/ext4/inode.c:3441 ext4_iomap_begin+0x182/0x5d0
RIP: 0010:ext4_iomap_begin+0x182/0x5d0
RSP: 0018:ffff88812460fa08 EFLAGS: 00010293
RAX: ffff88811f168000 RBX: 0000000000000000 RCX: ffffffff97793c12
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff88812c669160 R08: ffff88811f168000 R09: ffffed10258cd20f
R10: ffff88812c669077 R11: ffffed10258cd20e R12: 0000000000000001
R13: 00000000000000a4 R14: 000000000000000c R15: ffff88812c6691ee
FS: 00007fd0d6ff3740(0000) GS:ffff8883af180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd0d6dda290 CR3: 0000000104a62000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
iomap_apply+0x119/0x570
iomap_bmap+0x124/0x150
ext4_bmap+0x14f/0x250
bmap+0x55/0x80
do_vfs_ioctl+0x952/0xbd0
__x64_sys_ioctl+0xc6/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Above issue may happen as follows:
bmap write
bmap
ext4_bmap
iomap_bmap
ext4_iomap_begin
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin
ext4_prepare_inline_data
ext4_create_inline_data
ext4_set_inode_flag(inode,
EXT4_INODE_INLINE_DATA);
if (WARN_ON_ONCE(ext4_has_inline_data(inode))) ->trigger bug_on
To solved above issue hold inode lock in ext4_bamp. |
| In the Linux kernel, the following vulnerability has been resolved:
dm ioctl: fix misbehavior if list_versions races with module loading
__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.
The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.
The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.
"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.
Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.
Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)". |
| In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Fix race in schedule and flush work
While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping
online cpumask stable. The transient online mask results in below
calltrace.
[ 0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.346652] Detected PIPT I-cache on CPU2
[ 0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.377255] Detected PIPT I-cache on CPU3
[ 0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.379040] ------------[ cut here ]------------
[ 0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138
[ 0.384850] Modules linked in:
[ 0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13
[ 0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.388308] pc : __flush_work+0x12c/0x138
[ 0.388970] lr : __flush_work+0x80/0x138
[ 0.389620] sp : ffffffc00aaf3c60
[ 0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48
[ 0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100
[ 0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28
[ 0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9
[ 0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550
[ 0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000
[ 0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000
[ 0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000
[ 0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c
[ 0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000
[ 0.401886] Call trace:
[ 0.402309] __flush_work+0x12c/0x138
[ 0.402941] schedule_on_each_cpu+0x228/0x278
[ 0.403693] rcu_tasks_rude_wait_gp+0x130/0x144
[ 0.404502] rcu_tasks_kthread+0x220/0x254
[ 0.405264] kthread+0x174/0x1ac
[ 0.405837] ret_from_fork+0x10/0x20
[ 0.406456] irq event stamp: 102
[ 0.406966] hardirqs last enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4
[ 0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c
[ 0.409410] softirqs last enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c
[ 0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c
[ 0.411890] ---[ end trace 0000000000000000 ]---
[ 0.413000] smp: Brought up 1 node, 4 CPUs
[ 0.413762] SMP: Total of 4 processors activated.
[ 0.414566] CPU features: detected: 32-bit EL0 Support
[ 0.415414] CPU features: detected: 32-bit EL1 Support
[ 0.416278] CPU features: detected: CRC32 instructions
[ 0.447021] Callback from call_rcu_tasks_rude() invoked.
[ 0.506693] Callback from call_rcu_tasks() invoked.
This commit therefore fixes this issue by applying a single-CPU
optimization to the RCU Tasks Rude grace-period process. The key point
here is that the purpose of this RCU flavor is to force a schedule on
each online CPU since some past event. But the rcu_tasks_rude_wait_gp()
function runs in the context of the RCU Tasks Rude's grace-period kthread,
so there must already have been a context switch on the current CPU since
the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude().
So if there is only a single CPU online, RCU Tasks Rude's grace-period
kthread does not need to anything at all.
It turns out that the rcu_tasks_rude_wait_gp() function's call to
schedule_on_each_cpu() causes problems during early boot. During that
time, there is only one online CPU, namely the boot CPU. Therefore,
applying this single-CPU optimization fixes early-boot instances of
this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: fix race between nbd_alloc_config() and module removal
When nbd module is being removing, nbd_alloc_config() may be
called concurrently by nbd_genl_connect(), although try_module_get()
will return false, but nbd_alloc_config() doesn't handle it.
The race may lead to the leak of nbd_config and its related
resources (e.g, recv_workq) and oops in nbd_read_stat() due
to the unload of nbd module as shown below:
BUG: kernel NULL pointer dereference, address: 0000000000000040
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: knbd16-recv recv_work [nbd]
RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
Call Trace:
recv_work+0x3b/0xb0 [nbd]
process_one_work+0x1ed/0x390
worker_thread+0x4a/0x3d0
kthread+0x12a/0x150
ret_from_fork+0x22/0x30
Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV),
assign nbd->config only when nbd_alloc_config() succeeds to ensure
the value of nbd->config is binary (valid or NULL).
Also adding a debug message to check the reference counter
of nbd_config during module removal. |
