| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: fix NULL pointer dereference in icmp_tag_validation()
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation. |
| The Complianz – GDPR/CCPA Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 7.4.4.2. This is due to the `revert_divs_to_summary` function replacing `”` HTML entities with literal double-quote characters (`"`) in post content without subsequent sanitization. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the injected page. The Classic Editor plugin is required to be installed and activated in order to exploit this vulnerability. |
| The JS Help Desk – AI-Powered Support & Ticketing System plugin for WordPress is vulnerable to SQL Injection via the `multiformid` parameter in the `storeTickets()` function in all versions up to, and including, 3.0.4. This is due to the user-supplied `multiformid` value being passed to `esc_sql()` without enclosing the result in quotes in the SQL query, rendering the escaping ineffective against payloads that do not contain quote characters. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| thingino-firmware versions up to the firmware-2026-03-16 release contains an unauthenticated os command injection vulnerability in the WiFi captive portal CGI script that allows remote attackers to execute arbitrary commands as root by injecting malicious code through unsanitized HTTP parameter names. Attackers can exploit the eval function in parse_query() and parse_post() functions to achieve remote code execution and perform privileged configuration changes including root password reset and SSH authorized_keys modification, resulting in full persistent device compromise. |
| A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.10), RTUM85 RTU Base (All versions < V26.10). The affected application contains denial-of-service (DoS) vulnerability. The remote operation mode is susceptible to a resource exhaustion condition when subjected to a high volume of requests. Sending multiple requests can exhaust resources, preventing parameterization and requiring a reset or reboot to restore functionality. |
| A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.10), SICORE Base system (All versions < V26.10.0). The affected application contains an out-of-bounds write vulnerability while parsing specially crafted XML inputs. This could allow an unauthenticated attacker to exploit this issue by sending a malicious XML request, which may cause the service to crash, resulting in a denial-of-service condition. |
| The Amelia Booking plugin for WordPress is vulnerable to Insecure Direct Object References in versions up to, and including, 9.1.2. This is due to the plugin providing user-controlled access to objects, letting a user bypass authorization and access system resources. This makes it possible for authenticated attackers with customer-level permissions or above to change user passwords and potentially take over administrator accounts. The vulnerability is in the pro plugin, which has the same slug. |
| Buffer Overflow vulnerability in ZerBea hcxpcapngtool v. 7.0.1-43-g2ee308e allows a local attacker to obtain sensitive information via the getradiotapfield() function |
| Cross Site Scripting (xss) vulnerability in Timo 2.0.3 via crafted links in the title field. |
| Mattermost Plugins versions <=11.4 10.11.11.0 fail to validate webhook request timestamps which allows an attacker to corrupt Zoom meeting state in Mattermost via replayed webhook requests. Mattermost Advisory ID: MMSA-2026-00584 |
| A flaw was found in Keycloak. The User-Managed Access (UMA) 2.0 Protection API endpoint for permission tickets fails to enforce the `uma_protection` role check. This allows any authenticated user with a token issued for a resource server client, even without the `uma_protection` role, to enumerate all permission tickets in the system. This vulnerability partial leads to information disclosure. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Nelio Software Nelio AB Testing nelio-ab-testing allows Code Injection.This issue affects Nelio AB Testing: from n/a through <= 8.2.7. |
| Firecrawl version 2.8.0 and prior contain a server-side request forgery (SSRF) protection bypass vulnerability in the Playwright scraping service where network policy validation is applied only to the initial user-supplied URL and not to subsequent redirect destinations. Attackers can supply an externally valid URL that passes validation and returns an HTTP redirect to an internal or restricted resource, allowing the browser to follow the redirect and fetch the final destination without revalidation, thereby gaining access to internal network services and sensitive endpoints. This issue is distinct from CVE-2024-56800, which describes redirect-based SSRF generally. This vulnerability specifically arises from a post-redirect enforcement gap in implemented SSRF protections, where validation is applied only to the initial request and not to the final redirected destination. |
| The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to PHP Object Injection via deserialization of the 'post_content' of admin_form posts in all versions up to, and including, 3.28.31. This is due to the use of WordPress's `maybe_unserialize()` function without class restrictions on user-controllable content stored in admin_form post content. This makes it possible for authenticated attackers, with Editor-level access and above, to inject a PHP Object. The additional presence of a POP chain allows attackers to achieve remote code execution. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. In versions 1.2.1 through 1.6.55, `png_set_tRNS` and `png_set_PLTE` each alias a heap-allocated buffer between `png_struct` and `png_info`, sharing a single allocation across two structs with independent lifetimes. The `trans_alpha` aliasing has been present since at least libpng 1.0, and the `palette` aliasing since at least 1.2.1. Both affect all prior release lines `png_set_tRNS` sets `png_ptr->trans_alpha = info_ptr->trans_alpha` (256-byte buffer) and `png_set_PLTE` sets `info_ptr->palette = png_ptr->palette` (768-byte buffer). In both cases, calling `png_free_data` (with `PNG_FREE_TRNS` or `PNG_FREE_PLTE`) frees the buffer through `info_ptr` while the corresponding `png_ptr` pointer remains dangling. Subsequent row-transform functions dereference and, in some code paths, write to the freed memory. A second call to `png_set_tRNS` or `png_set_PLTE` has the same effect, because both functions call `png_free_data` internally before reallocating the `info_ptr` buffer. Version 1.6.56 fixes the issue. |
| Briefcase is a tool for converting a Python project into a standalone native application. Starting in version 0.3.0 and prior to version 0.3.26, if a developer uses Briefcase to produce an Windows MSI installer for a project, and that project is installed for All Users (i.e., per-machine scope), the installation process creates an directory that inherits all the permissions of the parent directory. Depending on the location chosen by the installing user, this may allow a low privilege but authenticated user to replace or modify the binaries installed by the application. If an administrator then runs the altered binary, the binary will run with elevated privileges. The problem is caused by the template used to generate the WXS file for Windows projects. It was fixed in the templates used in Briefcase 0.3.26, 0.4.0, and 0.4.1. Re-running `briefcase create` on your Briefcase project will result in the updated templates being used. As a workaround, the patch can be added to any existing Briefcase .wxs file generated by Briefcase 0.3.24 or later. |
| Kysely is a type-safe TypeScript SQL query builder. Prior to version 0.28.14, Kysely's `DefaultQueryCompiler.sanitizeStringLiteral()` only escapes single quotes by doubling them (`'` → `''`) but does not escape backslashes. When used with the MySQL dialect (where `NO_BACKSLASH_ESCAPES` is OFF by default), an attacker can use a backslash to escape the trailing quote of a string literal, breaking out of the string context and injecting arbitrary SQL. This affects any code path that uses `ImmediateValueTransformer` to inline values — specifically `CreateIndexBuilder.where()` and `CreateViewBuilder.as()`. Version 0.28.14 contains a fix. |
| Syft is a a CLI tool and Go library for generating a Software Bill of Materials (SBOM) from container images and filesystems. Syft versions before v1.42.3 would not properly cleanup temporary storage if the temporary storage was exhausted during a scan. When scanning archives Syft will unpack those archives into temporary storage then inspect the unpacked contents. Under normal operation Syft will remove the temporary data it writes after completing a scan. This vulnerability would affect users of Syft that were scanning content that could cause Syft to fill the temporary storage that would then cause Syft to raise an error and exit. When the error is triggered Syft would exit without properly removing the temporary files in use. In our testing this was most easily reproduced by scanning very large artifacts or highly compressed artifacts such as a zipbomb. Because Syft would not clean up its temporary files, the result would be filling temporary file storage preventing future runs of Syft or other system utilities that rely on temporary storage being available. The patch has been released in v1.42.3. Syft now cleans up temporary files when an error condition is encountered. There are no workarounds for this vulnerability in Syft. Users that find their temporary storage depleted can manually remove the temporary files. |
| Roadiz is a polymorphic content management system based on a node system that can handle many types of services. A vulnerability in roadiz/documents prior to versions 2.7.9, 2.6.28, 2.5.44, and 2.3.42 allows an authenticated attacker to read any file on the server's local file system that the web server process has access to, including highly sensitive environment variables, database credentials, and internal configuration files. Versions 2.7.9, 2.6.28, 2.5.44, and 2.3.42 contain a patch. |
