| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rk817: Fix node refcount leak
Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent()
Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in
kobject_add_internal() in kobject_init_and_add() in mdev_type_add()
in parent_create_sysfs_files(), it will return 0 and probe successfully.
And when rmmod mdpy.ko, the mdpy_dev_exit() will call
mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized
parent->types[i] in parent_remove_sysfs_files(), and it will cause
below null-ptr-deref.
If mdev_type_add() fails, return the error code and kset_unregister()
to fix the issue.
general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 2 PID: 10215 Comm: rmmod Tainted: G W N 6.6.0-rc2+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__kobject_del+0x62/0x1c0
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8
RSP: 0018:ffff88810695fd30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1
R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000
R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660
FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0
DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea
DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? __kobject_del+0x62/0x1c0
kobject_del+0x32/0x50
parent_remove_sysfs_files+0xd6/0x170 [mdev]
mdev_unregister_parent+0xfb/0x190 [mdev]
? mdev_register_parent+0x270/0x270 [mdev]
? find_module_all+0x9d/0xe0
mdpy_dev_exit+0x17/0x63 [mdpy]
__do_sys_delete_module.constprop.0+0x2fa/0x4b0
? module_flags+0x300/0x300
? __fput+0x4e7/0xa00
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fbc813221b7
Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7
RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58
RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000
R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870
R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0
</TASK>
Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy]
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace 0000000000000000 ]---
RIP: 0010:__kobject_del+0x62/0x1c0
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8
RSP: 0018:ffff88810695fd30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1
R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000
R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660
FS: 00007fbc81981540(0000) GS:ffff888119d00000(000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race
The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an
enclave and set secs.epc_page to NULL. The SECS page is used for EAUG
and ELDU in the SGX page fault handler. However, the NULL check for
secs.epc_page is only done for ELDU, not EAUG before being used.
Fix this by doing the same NULL check and reloading of the SECS page as
needed for both EAUG and ELDU.
The SECS page holds global enclave metadata. It can only be reclaimed
when there are no other enclave pages remaining. At that point,
virtually nothing can be done with the enclave until the SECS page is
paged back in.
An enclave can not run nor generate page faults without a resident SECS
page. But it is still possible for a #PF for a non-SECS page to race
with paging out the SECS page: when the last resident non-SECS page A
triggers a #PF in a non-resident page B, and then page A and the SECS
both are paged out before the #PF on B is handled.
Hitting this bug requires that race triggered with a #PF for EAUG.
Following is a trace when it happens.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:sgx_encl_eaug_page+0xc7/0x210
Call Trace:
? __kmem_cache_alloc_node+0x16a/0x440
? xa_load+0x6e/0xa0
sgx_vma_fault+0x119/0x230
__do_fault+0x36/0x140
do_fault+0x12f/0x400
__handle_mm_fault+0x728/0x1110
handle_mm_fault+0x105/0x310
do_user_addr_fault+0x1ee/0x750
? __this_cpu_preempt_check+0x13/0x20
exc_page_fault+0x76/0x180
asm_exc_page_fault+0x27/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the
reference count of bh when the call to nilfs_dat_translate() fails. If
the reference count hits 0 and its owner page gets unlocked, bh may be
freed. However, bh->b_page is dereferenced to put the page after that,
which may result in a use-after-free bug. This patch moves the release
operation after unlocking and putting the page.
NOTE: The function in question is only called in GC, and in combination
with current userland tools, address translation using DAT does not occur
in that function, so the code path that causes this issue will not be
executed. However, it is possible to run that code path by intentionally
modifying the userland GC library or by calling the GC ioctl directly.
[konishi.ryusuke@gmail.com: NOTE added to the commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/meson: fix memory leak on ->hpd_notify callback
The EDID returned by drm_bridge_get_edid() needs to be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y
and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected.
Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary
variables"), the damon_destroy_ctx() is removed, but still call
damon_new_target() and damon_new_region(), the damon_region which is
allocated by kmem_cache_alloc() in damon_new_region() and the damon_target
which is allocated by kmalloc in damon_new_target() are not freed. And
the damon_region which is allocated in damon_new_region() in
damon_set_regions() is also not freed.
So use damon_destroy_target to free all the damon_regions and damon_target.
unreferenced object 0xffff888107c9a940 (size 64):
comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk
60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `...............
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881079cc740 (size 56):
comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0
[<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107c9ac40 (size 64):
comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk
a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v.....
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881079ccc80 (size 56):
comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0
[<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid memory allocation in iommu_suspend()
The iommu_suspend() syscore suspend callback is invoked with IRQ disabled.
Allocating memory with the GFP_KERNEL flag may re-enable IRQs during
the suspend callback, which can cause intermittent suspend/hibernation
problems with the following kernel traces:
Calling iommu_suspend+0x0/0x1d0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 15 at kernel/time/timekeeping.c:868 ktime_get+0x9b/0xb0
...
CPU: 0 PID: 15 Comm: rcu_preempt Tainted: G U E 6.3-intel #r1
RIP: 0010:ktime_get+0x9b/0xb0
...
Call Trace:
<IRQ>
tick_sched_timer+0x22/0x90
? __pfx_tick_sched_timer+0x10/0x10
__hrtimer_run_queues+0x111/0x2b0
hrtimer_interrupt+0xfa/0x230
__sysvec_apic_timer_interrupt+0x63/0x140
sysvec_apic_timer_interrupt+0x7b/0xa0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1f/0x30
...
------------[ cut here ]------------
Interrupts enabled after iommu_suspend+0x0/0x1d0
WARNING: CPU: 0 PID: 27420 at drivers/base/syscore.c:68 syscore_suspend+0x147/0x270
CPU: 0 PID: 27420 Comm: rtcwake Tainted: G U W E 6.3-intel #r1
RIP: 0010:syscore_suspend+0x147/0x270
...
Call Trace:
<TASK>
hibernation_snapshot+0x25b/0x670
hibernate+0xcd/0x390
state_store+0xcf/0xe0
kobj_attr_store+0x13/0x30
sysfs_kf_write+0x3f/0x50
kernfs_fop_write_iter+0x128/0x200
vfs_write+0x1fd/0x3c0
ksys_write+0x6f/0xf0
__x64_sys_write+0x1d/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Given that only 4 words memory is needed, avoid the memory allocation in
iommu_suspend(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix TX CQE error handling
For an unknown TX CQE error type (probably from a newer hardware),
still free the SKB, update the queue tail, etc., otherwise the
accounting will be wrong.
Also, TX errors can be triggered by injecting corrupted packets, so
replace the WARN_ONCE to ratelimited error logging. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: Fix a memory corruption issue
A few lines above, space is kzalloc()'ed for:
sizeof(struct iwl_nvm_data) +
sizeof(struct ieee80211_channel) +
sizeof(struct ieee80211_rate)
'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine.
At the end of this structure, there is the 'channels' flex array.
Each element is of type 'struct ieee80211_channel'.
So only 1 element is allocated in this array.
When doing:
mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
We point at the first element of the 'channels' flex array.
So this is fine.
However, when doing:
mvm->nvm_data->bands[0].bitrates =
(void *)((u8 *)mvm->nvm_data->channels + 1);
because of the "(u8 *)" cast, we add only 1 to the address of the beginning
of the flex array.
It is likely that we want point at the 'struct ieee80211_rate' allocated
just after.
Remove the spurious casting so that the pointer arithmetic works as
expected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg
syzbot reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737
usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374
really_probe+0xf20/0x20b0 drivers/base/dd.c:529
driver_probe_device+0x293/0x390 drivers/base/dd.c:701
__device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
__device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032
usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241
usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272
really_probe+0xf20/0x20b0 drivers/base/dd.c:529
driver_probe_device+0x293/0x390 drivers/base/dd.c:701
__device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
__device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554
hub_port_connect drivers/usb/core/hub.c:5208 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5348 [inline]
port_event drivers/usb/core/hub.c:5494 [inline]
hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576
process_one_work+0x1688/0x2140 kernel/workqueue.c:2269
worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415
kthread+0x551/0x590 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
Local variable ----buf.i87@smsc75xx_bind created at:
__smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
__smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
This issue is caused because usbnet_read_cmd() reads less bytes than requested
(zero byte in the reproducer). In this case, 'buf' is not properly filled.
This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()
Including the transhdrlen in length is a problem when the packet is
partially filled (e.g. something like send(MSG_MORE) happened previously)
when appending to an IPv4 or IPv6 packet as we don't want to repeat the
transport header or account for it twice. This can happen under some
circumstances, such as splicing into an L2TP socket.
The symptom observed is a warning in __ip6_append_data():
WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800
that occurs when MSG_SPLICE_PAGES is used to append more data to an already
partially occupied skbuff. The warning occurs when 'copy' is larger than
the amount of data in the message iterator. This is because the requested
length includes the transport header length when it shouldn't. This can be
triggered by, for example:
sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP);
bind(sfd, ...); // ::1
connect(sfd, ...); // ::1 port 7
send(sfd, buffer, 4100, MSG_MORE);
sendfile(sfd, dfd, NULL, 1024);
Fix this by only adding transhdrlen into the length if the write queue is
empty in l2tp_ip6_sendmsg(), analogously to how UDP does things.
l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds
the UDP packet itself. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix memory leak of LZMA global compressed deduplication
When stressing microLZMA EROFS images with the new global compressed
deduplication feature enabled (`-Ededupe`), I found some short-lived
temporary pages weren't properly released, which could slowly cause
unexpected OOMs hours later.
Let's fix it now (LZ4 and DEFLATE don't have this issue.) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages
sent from one TCP socket (s1) to actually egress from another TCP
socket (s2):
tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg
tcp_bpf_send_verdict(s1) // __SK_REDIRECT case
tcp_bpf_sendmsg_redir(s2)
tcp_bpf_push_locked(s2)
tcp_bpf_push(s2)
tcp_rate_check_app_limited(s2) // expects tcp_sock
tcp_sendmsg_locked(s2) // ditto
There is a hard-coded assumption in the call-chain, that the egress
socket (s2) is a TCP socket.
However in commit 122e6c79efe1 ("sock_map: Update sock type checks for
UDP") we have enabled redirects to non-TCP sockets. This was done for the
sake of BPF sk_skb programs. There was no indention to support sk_msg
send-to-egress use case.
As a result, attempts to send-to-egress through a non-TCP socket lead to a
crash due to invalid downcast from sock to tcp_sock:
BUG: kernel NULL pointer dereference, address: 000000000000002f
...
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x1f/0x70
? page_fault_oops+0x80/0x160
? do_user_addr_fault+0x2d7/0x800
? rcu_is_watching+0x11/0x50
? exc_page_fault+0x70/0x1c0
? asm_exc_page_fault+0x27/0x30
? tcp_tso_segs+0x14/0xa0
tcp_write_xmit+0x67/0xce0
__tcp_push_pending_frames+0x32/0xf0
tcp_push+0x107/0x140
tcp_sendmsg_locked+0x99f/0xbb0
tcp_bpf_push+0x19d/0x3a0
tcp_bpf_sendmsg_redir+0x55/0xd0
tcp_bpf_send_verdict+0x407/0x550
tcp_bpf_sendmsg+0x1a1/0x390
inet_sendmsg+0x6a/0x70
sock_sendmsg+0x9d/0xc0
? sockfd_lookup_light+0x12/0x80
__sys_sendto+0x10e/0x160
? syscall_enter_from_user_mode+0x20/0x60
? __this_cpu_preempt_check+0x13/0x20
? lockdep_hardirqs_on+0x82/0x110
__x64_sys_sendto+0x1f/0x30
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg
program to prevent the crash. When attempted, user will receive an EACCES
error from send/sendto/sendmsg() syscall. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Fix reference leak
If a duplicate attribute is found using kset_find_obj(), a reference
to that attribute is returned which needs to be disposed accordingly
using kobject_put(). Move the setting name validation into a separate
function to allow for this change without having to duplicate the
cleanup code for this setting.
As a side note, a very similar bug was fixed in
commit 7295a996fdab ("platform/x86: dell-sysman: Fix reference leak"),
so it seems that the bug was copied from that driver.
Compile-tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows to wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.
On resume, BIOS will clear the wakeup bit. So driver need to re-enable it
in resume function to keep the next wakeup capability. But this BIOS
clearing of wakeup bit doesn't decrement internal OS GPE reference count,
so this reenabling on every resume will cause reference count to overflow.
So first disable and reenable ACPI GPE bit using acpi_disable_gpe(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_codec: Fix leaking content of local_codecs
The following memory leak can be observed when the controller supports
codecs which are stored in local_codecs list but the elements are never
freed:
unreferenced object 0xffff88800221d840 (size 32):
comm "kworker/u3:0", pid 36, jiffies 4294898739 (age 127.060s)
hex dump (first 32 bytes):
f8 d3 02 03 80 88 ff ff 80 d8 21 02 80 88 ff ff ..........!.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffffb324f557>] __kmalloc+0x47/0x120
[<ffffffffb39ef37d>] hci_codec_list_add.isra.0+0x2d/0x160
[<ffffffffb39ef643>] hci_read_codec_capabilities+0x183/0x270
[<ffffffffb39ef9ab>] hci_read_supported_codecs+0x1bb/0x2d0
[<ffffffffb39f162e>] hci_read_local_codecs_sync+0x3e/0x60
[<ffffffffb39ff1b3>] hci_dev_open_sync+0x943/0x11e0
[<ffffffffb396d55d>] hci_power_on+0x10d/0x3f0
[<ffffffffb30c99b4>] process_one_work+0x404/0x800
[<ffffffffb30ca134>] worker_thread+0x374/0x670
[<ffffffffb30d9108>] kthread+0x188/0x1c0
[<ffffffffb304db6b>] ret_from_fork+0x2b/0x50
[<ffffffffb300206a>] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix connection failure handling
In case immediate MPA request processing fails, the newly
created endpoint unlinks the listening endpoint and is
ready to be dropped. This special case was not handled
correctly by the code handling the later TCP socket close,
causing a NULL dereference crash in siw_cm_work_handler()
when dereferencing a NULL listener. We now also cancel
the useless MPA timeout, if immediate MPA request
processing fails.
This patch furthermore simplifies MPA processing in general:
Scheduling a useless TCP socket read in sk_data_ready() upcall
is now surpressed, if the socket is already moved out of
TCP_ESTABLISHED state. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: nuvoton: wpcm450: fix out of bounds write
Write into 'pctrl->gpio_bank' happens before the check for GPIO index
validity, so out of bounds write may happen.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: Fix a potential UAF in ca8210_probe
If of_clk_add_provider() fails in ca8210_register_ext_clock(),
it calls clk_unregister() to release priv->clk and returns an
error. However, the caller ca8210_probe() then calls ca8210_remove(),
where priv->clk is freed again in ca8210_unregister_ext_clock(). In
this case, a use-after-free may happen in the second time we call
clk_unregister().
Fix this by removing the first clk_unregister(). Also, priv->clk could
be an error code on failure of clk_register_fixed_rate(). Use
IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock(). |
| In the Linux kernel, the following vulnerability has been resolved:
ravb: Fix use-after-free issue in ravb_tx_timeout_work()
The ravb_stop() should call cancel_work_sync(). Otherwise,
ravb_tx_timeout_work() is possible to use the freed priv after
ravb_remove() was called like below:
CPU0 CPU1
ravb_tx_timeout()
ravb_remove()
unregister_netdev()
free_netdev(ndev)
// free priv
ravb_tx_timeout_work()
// use priv
unregister_netdev() will call .ndo_stop() so that ravb_stop() is
called. And, after phy_stop() is called, netif_carrier_off()
is also called. So that .ndo_tx_timeout() will not be called
after phy_stop(). |
