| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix an NULL dereference bug
The issue here is when this is called from ntfs_load_attr_list(). The
"size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow
on a 64bit systems but on 32bit systems the "+ 1023" can overflow and
the result is zero. This means that the kmalloc will succeed by
returning the ZERO_SIZE_PTR and then the memcpy() will crash with an
Oops on the next line. |
| In the Linux kernel, the following vulnerability has been resolved:
sh: push-switch: Reorder cleanup operations to avoid use-after-free bug
The original code puts flush_work() before timer_shutdown_sync()
in switch_drv_remove(). Although we use flush_work() to stop
the worker, it could be rescheduled in switch_timer(). As a result,
a use-after-free bug can occur. The details are shown below:
(cpu 0) | (cpu 1)
switch_drv_remove() |
flush_work() |
... | switch_timer // timer
| schedule_work(&psw->work)
timer_shutdown_sync() |
... | switch_work_handler // worker
kfree(psw) // free |
| psw->state = 0 // use
This patch puts timer_shutdown_sync() before flush_work() to
mitigate the bugs. As a result, the worker and timer will be
stopped safely before the deallocate operations. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7091r: Allow users to configure device events
AD7091R-5 devices are supported by the ad7091r-5 driver together with
the ad7091r-base driver. Those drivers declared iio events for notifying
user space when ADC readings fall bellow the thresholds of low limit
registers or above the values set in high limit registers.
However, to configure iio events and their thresholds, a set of callback
functions must be implemented and those were not present until now.
The consequence of trying to configure ad7091r-5 events without the
proper callback functions was a null pointer dereference in the kernel
because the pointers to the callback functions were not set.
Implement event configuration callbacks allowing users to read/write
event thresholds and enable/disable event generation.
Since the event spec structs are generic to AD7091R devices, also move
those from the ad7091r-5 driver the base driver so they can be reused
when support for ad7091r-2/-4/-8 be added. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: lib/mpi - Fix unexpected pointer access in mpi_ec_init
When the mpi_ec_ctx structure is initialized, some fields are not
cleared, causing a crash when referencing the field when the
structure was released. Initially, this issue was ignored because
memory for mpi_ec_ctx is allocated with the __GFP_ZERO flag.
For example, this error will be triggered when calculating the
Za value for SM2 separately. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - Fix page fault dead lock on mmap-ed hwrng
There is a dead-lock in the hwrng device read path. This triggers
when the user reads from /dev/hwrng into memory also mmap-ed from
/dev/hwrng. The resulting page fault triggers a recursive read
which then dead-locks.
Fix this by using a stack buffer when calling copy_to_user. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: Fix buffer overflow in trans_stat_show
Fix buffer overflow in trans_stat_show().
Convert simple snprintf to the more secure scnprintf with size of
PAGE_SIZE.
Add condition checking if we are exceeding PAGE_SIZE and exit early from
loop. Also add at the end a warning that we exceeded PAGE_SIZE and that
stats is disabled.
Return -EFBIG in the case where we don't have enough space to write the
full transition table.
Also document in the ABI that this function can return -EFBIG error. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/thermal/loongson2_thermal: Fix incorrect PTR_ERR() judgment
PTR_ERR() returns -ENODEV when thermal-zones are undefined, and we need
-ENODEV as the right value for comparison.
Otherwise, tz->type is NULL when thermal-zones is undefined, resulting
in the following error:
[ 12.290030] CPU 1 Unable to handle kernel paging request at virtual address fffffffffffffff1, era == 900000000355f410, ra == 90000000031579b8
[ 12.302877] Oops[#1]:
[ 12.305190] CPU: 1 PID: 181 Comm: systemd-udevd Not tainted 6.6.0-rc7+ #5385
[ 12.312304] pc 900000000355f410 ra 90000000031579b8 tp 90000001069e8000 sp 90000001069eba10
[ 12.320739] a0 0000000000000000 a1 fffffffffffffff1 a2 0000000000000014 a3 0000000000000001
[ 12.329173] a4 90000001069eb990 a5 0000000000000001 a6 0000000000001001 a7 900000010003431c
[ 12.337606] t0 fffffffffffffff1 t1 54567fd5da9b4fd4 t2 900000010614ec40 t3 00000000000dc901
[ 12.346041] t4 0000000000000000 t5 0000000000000004 t6 900000010614ee20 t7 900000000d00b790
[ 12.354472] t8 00000000000dc901 u0 54567fd5da9b4fd4 s9 900000000402ae10 s0 900000010614ec40
[ 12.362916] s1 90000000039fced0 s2 ffffffffffffffed s3 ffffffffffffffed s4 9000000003acc000
[ 12.362931] s5 0000000000000004 s6 fffffffffffff000 s7 0000000000000490 s8 90000001028b2ec8
[ 12.362938] ra: 90000000031579b8 thermal_add_hwmon_sysfs+0x258/0x300
[ 12.386411] ERA: 900000000355f410 strscpy+0xf0/0x160
[ 12.391626] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 12.397898] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 12.403678] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 12.409859] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 12.415882] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 12.415907] BADV: fffffffffffffff1
[ 12.415911] PRID: 0014a000 (Loongson-64bit, Loongson-2K1000)
[ 12.415917] Modules linked in: loongson2_thermal(+) vfat fat uio_pdrv_genirq uio fuse zram zsmalloc
[ 12.415950] Process systemd-udevd (pid: 181, threadinfo=00000000358b9718, task=00000000ace72fe3)
[ 12.415961] Stack : 0000000000000dc0 54567fd5da9b4fd4 900000000402ae10 9000000002df9358
[ 12.415982] ffffffffffffffed 0000000000000004 9000000107a10aa8 90000001002a3410
[ 12.415999] ffffffffffffffed ffffffffffffffed 9000000107a11268 9000000003157ab0
[ 12.416016] 9000000107a10aa8 ffffff80020fc0c8 90000001002a3410 ffffffffffffffed
[ 12.416032] 0000000000000024 ffffff80020cc1e8 900000000402b2a0 9000000003acc000
[ 12.416048] 90000001002a3410 0000000000000000 ffffff80020f4030 90000001002a3410
[ 12.416065] 0000000000000000 9000000002df6808 90000001002a3410 0000000000000000
[ 12.416081] ffffff80020f4030 0000000000000000 90000001002a3410 9000000002df2ba8
[ 12.416097] 00000000000000b4 90000001002a34f4 90000001002a3410 0000000000000002
[ 12.416114] ffffff80020f4030 fffffffffffffff0 90000001002a3410 9000000002df2f30
[ 12.416131] ...
[ 12.416138] Call Trace:
[ 12.416142] [<900000000355f410>] strscpy+0xf0/0x160
[ 12.416167] [<90000000031579b8>] thermal_add_hwmon_sysfs+0x258/0x300
[ 12.416183] [<9000000003157ab0>] devm_thermal_add_hwmon_sysfs+0x50/0xe0
[ 12.416200] [<ffffff80020cc1e8>] loongson2_thermal_probe+0x128/0x200 [loongson2_thermal]
[ 12.416232] [<9000000002df6808>] platform_probe+0x68/0x140
[ 12.416249] [<9000000002df2ba8>] really_probe+0xc8/0x3c0
[ 12.416269] [<9000000002df2f30>] __driver_probe_device+0x90/0x180
[ 12.416286] [<9000000002df3058>] driver_probe_device+0x38/0x160
[ 12.416302] [<9000000002df33a8>] __driver_attach+0xa8/0x200
[ 12.416314] [<9000000002deffec>] bus_for_each_dev+0x8c/0x120
[ 12.416330] [<9000000002df198c>] bus_add_driver+0x10c/0x2a0
[ 12.416346] [<9000000002df46b4>] driver_register+0x74/0x160
[ 12.416358] [<90000000022201a4>] do_one_initcall+0x84/0x220
[ 12.416372] [<90000000022f3ab8>] do_init_module+0x58/0x2c0
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: scomp - fix req->dst buffer overflow
The req->dst buffer size should be checked before copying from the
scomp_scratch->dst to avoid req->dst buffer overflow problem. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: sdio: Honor the host max_req_size in the RX path
Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes
with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth
combo card. The error he observed is identical to what has been fixed
in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST
bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem.
Lukas found that disabling or limiting RX aggregation works around the
problem for some time (but does not fully fix it). In the following
discussion a few key topics have been discussed which have an impact on
this problem:
- The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller
which prevents DMA transfers. Instead all transfers need to go through
the controller SRAM which limits transfers to 1536 bytes
- rtw88 chips don't split incoming (RX) packets, so if a big packet is
received this is forwarded to the host in it's original form
- rtw88 chips can do RX aggregation, meaning more multiple incoming
packets can be pulled by the host from the card with one MMC/SDIO
transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH
register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will
be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation
and BIT_EN_PRE_CALC makes the chip honor the limits more effectively)
Use multiple consecutive reads in rtw_sdio_read_port() and limit the
number of bytes which are copied by the host from the card in one
MMC/SDIO transfer. This allows receiving a buffer that's larger than
the hosts max_req_size (number of bytes which can be transferred in
one MMC/SDIO transfer). As a result of this the skb_over_panic error
is gone as the rtw88 driver is now able to receive more than 1536 bytes
from the card (either because the incoming packet is larger than that
or because multiple packets have been aggregated).
In case of an receive errors (-EILSEQ has been observed by Lukas) we
need to drain the remaining data from the card's buffer, otherwise the
card will return corrupt data for the next rtw_sdio_read_port() call. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix race between mmput() and do_exit()
Task A calls binder_update_page_range() to allocate and insert pages on
a remote address space from Task B. For this, Task A pins the remote mm
via mmget_not_zero() first. This can race with Task B do_exit() and the
final mmput() refcount decrement will come from Task A.
Task A | Task B
------------------+------------------
mmget_not_zero() |
| do_exit()
| exit_mm()
| mmput()
mmput() |
exit_mmap() |
remove_vma() |
fput() |
In this case, the work of ____fput() from Task B is queued up in Task A
as TWA_RESUME. So in theory, Task A returns to userspace and the cleanup
work gets executed. However, Task A instead sleep, waiting for a reply
from Task B that never comes (it's dead).
This means the binder_deferred_release() is blocked until an unrelated
binder event forces Task A to go back to userspace. All the associated
death notifications will also be delayed until then.
In order to fix this use mmput_async() that will schedule the work in
the corresponding mm->async_put_work WQ instead of Task A. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Check mailbox/SMT channel for consistency
On reception of a completion interrupt the shared memory area is accessed
to retrieve the message header at first and then, if the message sequence
number identifies a transaction which is still pending, the related
payload is fetched too.
When an SCMI command times out the channel ownership remains with the
platform until eventually a late reply is received and, as a consequence,
any further transmission attempt remains pending, waiting for the channel
to be relinquished by the platform.
Once that late reply is received the channel ownership is given back
to the agent and any pending request is then allowed to proceed and
overwrite the SMT area of the just delivered late reply; then the wait
for the reply to the new request starts.
It has been observed that the spurious IRQ related to the late reply can
be wrongly associated with the freshly enqueued request: when that happens
the SCMI stack in-flight lookup procedure is fooled by the fact that the
message header now present in the SMT area is related to the new pending
transaction, even though the real reply has still to arrive.
This race-condition on the A2P channel can be detected by looking at the
channel status bits: a genuine reply from the platform will have set the
channel free bit before triggering the completion IRQ.
Add a consistency check to validate such condition in the A2P ISR. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkisp1: Fix IRQ disable race issue
In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparently assumes that the interrupt handler won't
be running, and proceeds in the stop procedure. This is not the case, as
the interrupt handler can already be running, which would lead to the
ISP being disabled while the interrupt handler handling a captured
frame.
This brings up two issues: 1) the ISP could be powered off while the
interrupt handler is still running and accessing registers, leading to
board lockup, and 2) the interrupt handler code and the code that
disables the streaming might do things that conflict.
It is not clear to me if 2) causes a real issue, but 1) can be seen with
a suitable delay (or printk in my case) in the interrupt handler,
leading to board lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Add mutex lock in control vblank irq
Add a mutex lock to control vblank irq to synchronize vblank
enable/disable operations happening from different threads to prevent
race conditions while registering/unregistering the vblank irq callback.
v4: -Removed vblank_ctl_lock from dpu_encoder_virt, so it is only a
parameter of dpu_encoder_phys.
-Switch from atomic refcnt to a simple int counter as mutex has
now been added
v3: Mistakenly did not change wording in last version. It is done now.
v2: Slightly changed wording of commit message
Patchwork: https://patchwork.freedesktop.org/patch/571854/ |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix deadlock or deadcode of misusing dget()
The lock order is incorrect between denty and its parent, we should
always make sure that the parent get the lock first.
But since this deadcode is never used and the parent dir will always
be set from the callers, let's just remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Only call folio_start_fscache() one time for each folio
If a network filesystem using netfs implements a clamp_length()
function, it can set subrequest lengths smaller than a page size.
When we loop through the folios in netfs_rreq_unlock_folios() to
set any folios to be written back, we need to make sure we only
call folio_start_fscache() once for each folio.
Otherwise, this simple testcase:
mount -o fsc,rsize=1024,wsize=1024 127.0.0.1:/export /mnt/nfs
dd if=/dev/zero of=/mnt/nfs/file.bin bs=4096 count=1
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.0126359 s, 324 kB/s
echo 3 > /proc/sys/vm/drop_caches
cat /mnt/nfs/file.bin > /dev/null
will trigger an oops similar to the following:
page dumped because: VM_BUG_ON_FOLIO(folio_test_private_2(folio))
------------[ cut here ]------------
kernel BUG at include/linux/netfs.h:44!
...
CPU: 5 PID: 134 Comm: kworker/u16:5 Kdump: loaded Not tainted 6.4.0-rc5
...
RIP: 0010:netfs_rreq_unlock_folios+0x68e/0x730 [netfs]
...
Call Trace:
netfs_rreq_assess+0x497/0x660 [netfs]
netfs_subreq_terminated+0x32b/0x610 [netfs]
nfs_netfs_read_completion+0x14e/0x1a0 [nfs]
nfs_read_completion+0x2f9/0x330 [nfs]
rpc_free_task+0x72/0xa0 [sunrpc]
rpc_async_release+0x46/0x70 [sunrpc]
process_one_work+0x3bd/0x710
worker_thread+0x89/0x610
kthread+0x181/0x1c0
ret_from_fork+0x29/0x50 |
| In the Linux kernel, the following vulnerability has been resolved:
net/core: Fix ETH_P_1588 flow dissector
When a PTP ethernet raw frame with a size of more than 256 bytes followed
by a 0xff pattern is sent to __skb_flow_dissect, nhoff value calculation
is wrong. For example: hdr->message_length takes the wrong value (0xffff)
and it does not replicate real header length. In this case, 'nhoff' value
was overridden and the PTP header was badly dissected. This leads to a
kernel crash.
net/core: flow_dissector
net/core flow dissector nhoff = 0x0000000e
net/core flow dissector hdr->message_length = 0x0000ffff
net/core flow dissector nhoff = 0x0001000d (u16 overflow)
...
skb linear: 00000000: 00 a0 c9 00 00 00 00 a0 c9 00 00 00 88
skb frag: 00000000: f7 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Using the size of the ptp_header struct will allow the corrected
calculation of the nhoff value.
net/core flow dissector nhoff = 0x0000000e
net/core flow dissector nhoff = 0x00000030 (sizeof ptp_header)
...
skb linear: 00000000: 00 a0 c9 00 00 00 00 a0 c9 00 00 00 88 f7 ff ff
skb linear: 00000010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
skb linear: 00000020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
skb frag: 00000000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Kernel trace:
[ 74.984279] ------------[ cut here ]------------
[ 74.989471] kernel BUG at include/linux/skbuff.h:2440!
[ 74.995237] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 75.001098] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G U 5.15.85-intel-ese-standard-lts #1
[ 75.011629] Hardware name: Intel Corporation A-Island (CPU:AlderLake)/A-Island (ID:06), BIOS SB_ADLP.01.01.00.01.03.008.D-6A9D9E73-dirty Mar 30 2023
[ 75.026507] RIP: 0010:eth_type_trans+0xd0/0x130
[ 75.031594] Code: 03 88 47 78 eb c7 8b 47 68 2b 47 6c 48 8b 97 c0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb ab <0f> 0b b8 00 01 00 00 eb a2 48 85 ff 74 eb 48 8d 54 24 06 31 f6 b9
[ 75.052612] RSP: 0018:ffff9948c0228de0 EFLAGS: 00010297
[ 75.058473] RAX: 00000000000003f2 RBX: ffff8e47047dc300 RCX: 0000000000001003
[ 75.066462] RDX: ffff8e4e8c9ea040 RSI: ffff8e4704e0a000 RDI: ffff8e47047dc300
[ 75.074458] RBP: ffff8e4704e2acc0 R08: 00000000000003f3 R09: 0000000000000800
[ 75.082466] R10: 000000000000000d R11: ffff9948c0228dec R12: ffff8e4715e4e010
[ 75.090461] R13: ffff9948c0545018 R14: 0000000000000001 R15: 0000000000000800
[ 75.098464] FS: 0000000000000000(0000) GS:ffff8e4e8fb00000(0000) knlGS:0000000000000000
[ 75.107530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 75.113982] CR2: 00007f5eb35934a0 CR3: 0000000150e0a002 CR4: 0000000000770ee0
[ 75.121980] PKRU: 55555554
[ 75.125035] Call Trace:
[ 75.127792] <IRQ>
[ 75.130063] ? eth_get_headlen+0xa4/0xc0
[ 75.134472] igc_process_skb_fields+0xcd/0x150
[ 75.139461] igc_poll+0xc80/0x17b0
[ 75.143272] __napi_poll+0x27/0x170
[ 75.147192] net_rx_action+0x234/0x280
[ 75.151409] __do_softirq+0xef/0x2f4
[ 75.155424] irq_exit_rcu+0xc7/0x110
[ 75.159432] common_interrupt+0xb8/0xd0
[ 75.163748] </IRQ>
[ 75.166112] <TASK>
[ 75.168473] asm_common_interrupt+0x22/0x40
[ 75.173175] RIP: 0010:cpuidle_enter_state+0xe2/0x350
[ 75.178749] Code: 85 c0 0f 8f 04 02 00 00 31 ff e8 39 6c 67 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 50 02 00 00 31 ff e8 52 b0 6d ff fb 45 85 f6 <0f> 88 b1 00 00 00 49 63 ce 4c 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[ 75.199757] RSP: 0018:ffff9948c013bea8 EFLAGS: 00000202
[ 75.205614] RAX: ffff8e4e8fb00000 RBX: ffffb948bfd23900 RCX: 000000000000001f
[ 75.213619] RDX: 0000000000000004 RSI: ffffffff94206161 RDI: ffffffff94212e20
[ 75.221620] RBP: 0000000000000004 R08: 000000117568973a R09: 0000000000000001
[ 75.229622] R10: 000000000000afc8 R11: ffff8e4e8fb29ce4 R12: ffffffff945ae980
[ 75.237628] R13: 000000117568973a R14: 0000000000000004 R15: 0000000000000000
[ 75.245635] ?
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use DEV_STATS_INC()
syzbot/KCSAN reported data-races in br_handle_frame_finish() [1]
This function can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Handles updates to dev->stats.tx_dropped while we are at it.
[1]
BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356
batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00000000000d7190 -> 0x00000000000d7191
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f361b9 #0 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm, kexec, ima: Use memblock_free_late() from ima_free_kexec_buffer()
The code calling ima_free_kexec_buffer() runs long after the memblock
allocator has already been torn down, potentially resulting in a use
after free in memblock_isolate_range().
With KASAN or KFENCE, this use after free will result in a BUG
from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer() over to memblock_free_late() to avoid
that bug. |
| In the Linux kernel, the following vulnerability has been resolved:
team: fix null-ptr-deref when team device type is changed
Get a null-ptr-deref bug as follows with reproducer [1].
BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? vlan_dev_hard_header+0x35/0x140 [8021q]
? vlan_dev_hard_header+0x8e/0x140 [8021q]
neigh_connected_output+0xb2/0x100
ip6_finish_output2+0x1cb/0x520
? nf_hook_slow+0x43/0xc0
? ip6_mtu+0x46/0x80
ip6_finish_output+0x2a/0xb0
mld_sendpack+0x18f/0x250
mld_ifc_work+0x39/0x160
process_one_work+0x1e6/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0
When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.
Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rds: Fix possible NULL-pointer dereference
In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists
before dereferencing it as rdma_set_service_type() argument
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
