| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in AutohomeCorp frostmourne up to 1.0. The affected element is an unknown function of the file frostmourne-monitor/src/main/java/com/autohome/frostmourne/monitor/controller/AlarmController.java of the component Alarm Preview. Executing a manipulation can lead to server-side request forgery. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was identified in Shandong Hoteam InforCenter PLM up to 8.3.8. The impacted element is the function uploadFileToIIS of the file /Base/BaseHandler.ashx. The manipulation of the argument File leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Only WARN in direct MMUs when overwriting shadow-present SPTE
Adjust KVM's sanity check against overwriting a shadow-present SPTE with a
another SPTE with a different target PFN to only apply to direct MMUs,
i.e. only to MMUs without shadowed gPTEs. While it's impossible for KVM
to overwrite a shadow-present SPTE in response to a guest write, writes
from outside the scope of KVM, e.g. from host userspace, aren't detected
by KVM's write tracking and so can break KVM's shadow paging rules.
------------[ cut here ]------------
pfn != spte_to_pfn(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:3069 at mmu_set_spte+0x1e4/0x440 [kvm], CPU#0: vmx_ept_stale_r/872
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 872 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mmu_set_spte+0x1e4/0x440 [kvm]
Call Trace:
<TASK>
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix memory leak in verify_header
The function sets `*ns = NULL` on every call, leaking the namespace
string allocated in previous iterations when multiple profiles are
unpacked. This also breaks namespace consistency checking since *ns
is always NULL when the comparison is made.
Remove the incorrect assignment.
The caller (aa_unpack) initializes *ns to NULL once before the loop,
which is sufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: replace recursive profile removal with iterative approach
The profile removal code uses recursion when removing nested profiles,
which can lead to kernel stack exhaustion and system crashes.
Reproducer:
$ pf='a'; for ((i=0; i<1024; i++)); do
echo -e "profile $pf { \n }" | apparmor_parser -K -a;
pf="$pf//x";
done
$ echo -n a > /sys/kernel/security/apparmor/.remove
Replace the recursive __aa_profile_list_release() approach with an
iterative approach in __remove_profile(). The function repeatedly
finds and removes leaf profiles until the entire subtree is removed,
maintaining the same removal semantic without recursion. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix: limit the number of levels of policy namespaces
Currently the number of policy namespaces is not bounded relying on
the user namespace limit. However policy namespaces aren't strictly
tied to user namespaces and it is possible to create them and nest
them arbitrarily deep which can be used to exhaust system resource.
Hard cap policy namespaces to the same depth as user namespaces. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix differential encoding verification
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Brainstorm Force Ultimate Addons for WPBakery Page Builder allows DOM-Based XSS.This issue affects Ultimate Addons for WPBakery Page Builder: from n/a before 3.21.4. |
| Ericsson Packet Core Controller (PCC) versions prior
to 1.38 contain a vulnerability where an attacker sending a large volume of
specially crafted messages may cause service degradation. |
| A vulnerability was detected in Harvard University IQSS Dataverse up to 6.8. This affects an unknown function of the file /ThemeAndWidgets.xhtml of the component Theme Customization. Performing a manipulation of the argument uploadLogo results in unrestricted upload. Remote exploitation of the attack is possible. The exploit is now public and may be used. Upgrading to version 6.10 mitigates this issue. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| Insufficient permission validation on multiple REST API Quick Setup endpoints in Checkmk 2.5.0 (beta) before version 2.5.0b2 and 2.4.0 before version 2.4.0p25 allows low-privileged users to perform unauthorized actions or obtain sensitive information |
| A vulnerability was identified in MEPIS RM, an industrial
software product developed by Metronik. The application contained a hardcoded
cryptographic key within the Mx.Web.ComponentModel.dll component. When the
option to store domain passwords was enabled, this key was used to encrypt user
passwords before storing them in the application’s database. An attacker with
sufficient privileges to access the database could extract the encrypted
passwords, decrypt them using the embedded key, and gain unauthorized access to
the associated ICS/OT environment. |
| A local file inclusion vulnerability in the upload/download flow of the VertiGIS FM application allows authenticated attackers to read arbitrary files from the server by manipulating a file's path during its upload. When the file is subsequently downloaded, the file in the attacker controlled path is returned. Due to the application's ASP.NET architecture, this could potentially lead to remote code execution when the "web.config" file is obtained. Furthermore, the application resolves UNC paths which may enable NTLM-relaying attacks.
This issue affects VertiGIS FM: 10.5.00119 (0d29d428). |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. |
| OpenViking versions 0.2.5 prior to 0.2.14 contain a missing authentication vulnerability in the bot proxy router that allows remote unauthenticated attackers to access protected bot proxy functionality by sending requests to the POST /bot/v1/chat and POST /bot/v1/chat/stream endpoints. Attackers can bypass authentication checks and interact directly with the upstream bot backend through the OpenViking proxy without providing valid credentials. |
| pymanager included the current working directory in sys.path meaning modules could be shadowed by modules in the current working directory. As a result, if a user executes a pymanager-generated command (e.g., pip, pytest)
from an attacker-controlled directory, a malicious module in that
directory can be imported and executed instead of the intended package. |
| A flaw was found in libinput. An attacker capable of deploying a Lua plugin file in specific system directories can exploit a dangling pointer vulnerability. This occurs when a garbage collection cleanup function is called, leaving a pointer that can then be printed to system logs. This could potentially expose sensitive data if the memory location is re-used, leading to information disclosure. For this exploit to work, Lua plugins must be enabled in libinput and loaded by the compositor. |
| The DataRow.Decode function fails to properly validate field lengths. A malicious or compromised PostgreSQL server can send a DataRow message with a negative field length, causing a slice bounds out of range panic. |
| Impact:
The fix for CVE-2021-23337 (https://github.com/advisories/GHSA-35jh-r3h4-6jhm) added validation for the variable option in _.template but did not apply the same validation to options.imports key names. Both paths flow into the same Function() constructor sink.
When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time.
Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in. If Object.prototype has been polluted by any other vector, the polluted keys are copied into the imports object and passed to Function().
Patches:
Users should upgrade to version 4.18.0.
Workarounds:
Do not pass untrusted input as key names in options.imports. Only use developer-controlled, static key names. |
