| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-of-aspeed: Remove children before releasing SDC resources
Probe failure and removal leave SDHCI child devices registered after the
parent clock and managed resources are released.
Unregister the OF children in reverse order before disabling the parent
clock on both paths. Use of_platform_device_destroy() because manual
child creation does not set the flag required by of_platform_depopulate().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior while preventing a second cleanup of
the failed tree. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value
mhi_mbim_rx() ignores the return value of skb_copy_bits() when it
copies each datagram out of the NTB. The datagram offset and length
come from the DPE, which is only checked to lie within the NTB
itself, so a modem can point a datagram outside the received skb.
The copy then fails and the freshly allocated skbn is passed to
netif_rx() with its uninitialized contents still in place, leaking
kernel heap memory into the network stack.
Free the skb and account an error when the copy fails.
Verified in a QEMU guest with a fault injector pointing a DPE
outside the received NTB: the copy fails, and the unpatched driver
hands the uninitialized skbn to the network stack (observed as
"unknown protocol" on bytes that were never written). With this
check the failed datagram is dropped and counted as an rx error.
Changes in v2: factor the free-and-count sequence out into
mhi_mbim_rx_drop(), shared with the unknown-protocol path, as
suggested by Loic Poulain. |
| An issue was discovered in Django 6.1 before 6.1.2, 6.0 before 6.0.9, and 5.2 before 5.2.18.
`django.utils.http.parse_header_parameters()` was subject to a potential denial-of-service attack due to quadratic time complexity when parsing a value with many separators inside a quoted parameter. An unauthenticated request could reach this parsing through headers such as `Accept` or `Content-Type`, for instance via the content negotiation performed by `HttpRequest.accepts()`. The per-call length limit does not bound the combined size of repeated headers.
Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected.
Django would like to thank Jisung Chae for reporting this issue. |
| An issue was discovered in Django 6.1 before 6.1.2, 6.0 before 6.0.9, and 5.2 before 5.2.18.
`django.forms.models.BaseModelFormSet.save_existing_objects()` used the presence of a primary key on a submitted form's instance as evidence that the instance belonged to the formset's limiting queryset. An object outside that queryset is represented by a newly constructed instance whose primary key can still be populated from submitted data when the model's primary key is a field accepted by the form, such as a `OneToOneField` or parent link used as the primary key of an inline formset's model, or a natural or UUID primary key included in the form's fields. This allows an authenticated user permitted to submit such a formset to delete rows outside the limiting queryset, without any permission on the targeted object, via forged management-form data marking an out-of-queryset object for deletion. Models using the default AutoField primary key are not affected.
Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected.
Django would like to thank Seonggwon Yoon for reporting this issue. |
| Mooncake through 0.3.13.post1 contains a missing authentication vulnerability in the Store REST service, which binds to 0.0.0.0 without authentication on any route. Unauthenticated attackers can call routes such as /api/get, /api/put, /api/remove_all and /api/mount to read cached KV data with user prompts, inject or delete objects, and mount attacker-described segments. |
| Mooncake Store master through 0.3.13.post1 contains a missing authentication vulnerability that allows unauthenticated attackers to force-delete any object via Remove, RemoveByRegex, RemoveAll and BatchRemove on the coro_rpc port. Attackers can send forged requests with the force flag set to bypass lease checks, wipe keys matching any regex, or clear the entire store, causing cache loss and request failures. |
| Mooncake Store master through 0.3.13.post1 contains a missing authorization vulnerability that allows unauthenticated attackers to create, steal, and falsely complete replication tasks via the coro_rpc port. Attackers can invoke CreateCopyTask, CreateMoveTask, FetchTasks, and MarkTaskToComplete with victim client UUIDs disclosed by QueryTask to hijack task queues and record replication that never occurred. |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.10, the type_text and launch_app tools in ufo/client/mcp/http_servers/mobile_mcp_server.py pass the authenticated caller-controlled text and package_name parameters into adb shell command argument positions without comprehensive validation. The adb client joins those arguments into a remote command string that the Android shell reparses, allowing shell metacharacters to execute additional commands on an authorized connected device as the Android shell user. Exploitation requires a valid Mobile MCP API key and a reachable device authorized for ADB, and it does not establish host operating-system execution, Android root execution, or access beyond the Android shell-user privileges. This issue is fixed in version 3.0.10. |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.9, the execute_command tool in ufo/client/mcp/http_servers/linux_mcp_server.py treats sort and uniq as read-only commands while the free-form command parameter can select their file-output forms. An authenticated caller can use sort -o or the optional second uniq operand to create or overwrite files writable by the UFO server process without shell metacharacters, because the allowed binary opens the destination itself and the argument policy does not reject the operation. This can corrupt configuration or other writable data and disrupt the service, but the demonstrated primitive does not directly disclose files or establish arbitrary code execution. This issue is fixed in version 3.0.9. |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.9, the run_shell tool in the CommandLineExecutor component of ufo/client/mcp/local_servers/cli_mcp_server.py validates only the first token of the bash_command parameter and permits explorer.exe. On Windows, explorer.exe delegates its following path argument to ShellExecute, so an attacker-influenced agent call can launch an arbitrary executable or script as the desktop user even though the subprocess uses shell=False. Exploitation depends on a user running an affected agent workflow and on inducing the tool call, but successful execution can access or modify that user's files, tokens, and sessions. This issue is fixed in version 3.0.9. |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.9, the /api/task_result/{task_name} endpoint calls SessionManager.get_result_by_task() in ufo/server/services/session_manager.py, which acquires a non-reentrant lock and then calls SessionManager.get_result() to acquire the same lock again when the task name maps to a session. An authenticated caller who knows or creates a mapped task name can therefore block the request indefinitely, and in the default single-process server configuration the blocked event-loop thread prevents other HTTP, WebSocket, and dependent background interactions. Unknown task names do not reach the nested call and are not affected. This issue is fixed in version 3.0.9. |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.9, the press_key tool in ufo/client/mcp/http_servers/mobile_mcp_server.py accepts a free-form key_code parameter and passes it to `adb shell input keyevent`. The adb client joins the arguments into a remote command string that the Android shell reparses, allowing an authenticated Mobile MCP caller to execute additional commands as the Android shell user on an authorized connected device. Exploitation requires a valid UFO_MCP_API_KEY, adb on the host, and a reachable authorized device, and it does not establish host operating-system execution, Android root execution, or access beyond the Android shell-user privileges. This issue is fixed in version 3.0.9. |
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept
We need to clear cep before release state_lock as siw_qp_llp_close and
siw_qp_modify->siw_qp_llp_close did.
Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock
is released before the error path cleanup. A concurrent ibv_modify_qp()
transitioning the QP to ERROR can race in this window:
siw_accept() ibv_modify_qp(ERROR)
---------------------- ----------------------
siw_qp_modify() fails
up_write(&qp->state_lock)
down_write(&qp->state_lock)
nextstate_from_idle():
if (qp->cep)
siw_cep_put(qp->cep) <- frees cep
qp->cep = NULL
goto error
cep->qp = NULL <- UAF
Clear qp->cep and drop the association reference taken by siw_cep_get(),
all under the write lock held from the initial down_write(&qp->state_lock).
Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free
the cep before siw_accept() is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: validate access flags before swapping the MR's PD
rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then
validates the IB_MR_REREG_ACCESS argument:
if (flags & IB_MR_REREG_PD) {
rxe_put(old_pd);
rxe_get(pd);
mr->ibmr.pd = ibpd;
}
if (flags & IB_MR_REREG_ACCESS) {
if (access & ~RXE_ACCESS_SUPPORTED_MR)
return ERR_PTR(-EOPNOTSUPP);
mr->access = access;
}
Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is
IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access
check with mr->ibmr.pd already reassigned.
mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the
success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error
without undoing the reassignment, so mr->pd == new_pd while the usecnts
still charge the MR to orig_pd. ib_dereg_mr_user() then decrements
new_pd, whose count can reach zero while a memory window still references
it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup()
writes to freed memory:
BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0
Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591
__rxe_put+0x31/0xa0
rxe_mw_cleanup+0x42/0x200
__rxe_cleanup+0x115/0x370
rxe_dealloc_mw+0x4c/0x80
Allocated by task 591:
ib_uverbs_alloc_pd+0x258/0x540
Freed by task 591:
ib_dealloc_pd_user+0x174/0x210
uverbs_free_pd+0x8d/0xc0
ib_uverbs_dealloc_pd+0x18e/0x1d0
Validate the access flags before mutating any state so the callback either
applies every requested change or none. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova < mr->ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold net_device reference under RCU in bundle creation
xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into
a local pointer without taking a device reference, then pass it to
xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via
dst_dev_put() and frees the old net_device, causing a use-after-free
when xfrm6_fill_dst() later dereferences the stale dev pointer.
BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860
(net/ipv6/xfrm6_policy.c:86 netdev_hold())
Read of size 8 at addr ffff8880142fe588 by task exploit/153
Call Trace:
xfrm6_fill_dst+0x82c/0x860
xfrm_resolve_and_create_bundle+0x21d4/0x2bd0
xfrm_lookup_with_ifid+0x485/0x1640
ip6_dst_lookup_flow+0x19b/0x1e0
udpv6_sendmsg+0x1443/0x2dd0
Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU
read-side critical section active until xfrm_fill_dst() has taken the
required device references. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: unlist vifs when their netdev is unregistered
mac80211 only removes vifs from the local->interfaces list when
an interface is removed via ieee80211_if_remove(), before it
unregisters the netdev. However, it's possible for a netdev to
be unregistered without going through that: When the netns that
holds the wiphy is destroyed, the wiphy is supposed to move to
the init_ns, but that can run into allocation failures.
Then, mac80211 has an interface listed that doesn't exist, and
will eventually hit
BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()!
...
_cfg80211_unregister_wdev+0x24/0x36a [cfg80211]
cfg80211_unregister_wdev+0x15/0x1d [cfg80211]
ieee80211_remove_interfaces+0x1ff/0x257 [mac80211]
ieee80211_unregister_hw+0x73/0x1d1 [mac80211]
mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim]
Remove the interface from the list in ->ndo_uninit if it's still
around to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: pxa: fix double counting of the hw descriptors
pxad_alloc_desc() was converted from
kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT)
to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc
itself - but only where the compiler has __builtin_counted_by_ref(), so
from gcc 15.1 or clang 22.1 on. The loop below it still increments
nb_desc, which makes it come out doubled there and correct elsewhere.
nb_desc is what pxad_free_desc() iterates over and what
set_updater_desc() indexes from, so set it explicitly and drop the
increment. The error path has to lower it to the number of descriptors
allocated so far, otherwise pxad_free_desc() would free entries that were
never allocated. |
