| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm
The cleanup tail of kfd_criu_resume_svm() walks
svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata
without removing it from the list. The list head is left pointing at
freed kmalloc-96 objects.
A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty()
reads the dangling ->next (use-after-free), the loop walks freed entries,
and each is kfree()'d again (double-free). This is reachable by an
unprivileged render-group user via /dev/kfd with no capabilities required.
Add list_del() before the kfree() so the list is properly emptied. The
list_for_each_entry_safe() iterator already caches the next pointer, so
unlinking during the walk is safe.
(cherry picked from commit 6322d278a298e2c1430b9d2697743d3a04b788b1) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: make sure gc is properly stopped
Sashiko noticed that when destroying a set,
cancel_delayed_work_sync() was called while gc
calls queue_delayed_work() unconditionally which
can lead not to properly shutting down the gc. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: prevent connlimit drops for early confirmed ct
Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add
was skipped") introduced a regression where packets for valid
connections are dropped when using connlimit for soft-limiting
scenarios.
The issue occurs when a new connection reuses a socket currently in
the TIME_WAIT state. In this scenario, the connection tracking entry
is evaluated as already confirmed. Previously, __nf_conncount_add()
assumed that if a connection was confirmed and did not originate from
the loopback interface, it should skip the addition and return -EEXIST.
Skipping the addition triggers a garbage collection run that cleans up
the TIME_WAIT connection. Consequently, the active connection count
drops to 0, which xt_connlimit mishandles, leading to the false rejection
of the perfectly valid new connection.
Fix this by replacing the interface check with protocol-agnostic state
checks. We now skip the tree insertion and preserve the lockless garbage
collection optimization only if the connection is IPS_ASSURED. This
allows early-confirmed setup packets (such as reused TIME_WAIT sockets
or locally generated SYN-ACKs) to be properly evaluated and counted
without falsely dropping. The goto check_connections path is maintained
to ensure these setup packets are deduplicated correctly.
This has been tested with slowhttptest and HTTP server configured
locally to ensure we are not breaking soft-limiting scenarios for local
or external connections. In addition, it was tested with a OVS zone
limit too. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Move kvm_io_bus_get_dev() locking responsibilities to callers
kvm_io_bus_get_dev() returns a device that is only matched by the
address, and nothing else. This can cause a lifetime issue if
the matched device is not the expected type, as by the time
the caller can introspect the object, it might be gone (the srcu
lock having been dropped).
Given that there is only a single user of this helper, the simplest
option is to move the locking responsibility to the caller, which
can keep the srcu lock held for as long as it wants.
Note that this aligns with other kvm_io_bus*() helpers, which
already require the srcu lock to be held by the callers. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: wait for in-flight TLS handshake callback when cancel loses race
When wait_for_completion_interruptible_timeout() in
svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and
tls_handshake_cancel() then returns false, handshake_complete() has
won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and
is about to invoke svc_tcp_handshake_done(), but the callback's
side effects on xpt_flags and on svsk->sk_handshake_done have not
yet committed.
The current code reads xpt_flags immediately to decide whether the
session succeeded. Two races result.
If the callback has executed set_bit(XPT_TLS_SESSION) but not yet
clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session,
enqueues the transport, and returns. svc_xprt_received() then
clears XPT_BUSY, a worker thread picks the transport up, the
dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set,
and xpo_handshake is invoked a second time. That svc_tcp_handshake()
calls init_completion(&svsk->sk_handshake_done) while the original
callback concurrently calls complete_all() on it, corrupting the
embedded swait_queue.
If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet
entered svc_tcp_handshake_done(), svc_tcp_handshake() reads
XPT_TLS_SESSION as clear and tears the connection down even though
the handshake is about to succeed.
Wait for the callback to commit before inspecting xpt_flags. The
completion is guaranteed to fire because handshake_complete()
invokes svc_tcp_handshake_done() unconditionally once it has set
HANDSHAKE_F_REQ_COMPLETED. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
Patch series "userfaultfd/pagemap: pre-existing fixes".
These are pre-existing bug fixes that were carried at the front of the
userfaultfd RWP working-set-tracking series up to v5 [1]. Per review
feedback that fixes should not sit in the middle of a feature series, they
are split out and sent on their own; the RWP series is reposted rebased on
top of this.
All six were flagged by the Sashiko AI review of the RWP series and carry
independent of RWP, apply to mm-new directly, and carry Cc: stable@.
1: fs/proc/task_mmu: a missing huge_ptep_modify_prot_start() in
make_uffd_wp_huge_pte() can lose hardware Dirty/Accessed updates
when PAGEMAP_SCAN write-protects a hugetlb PTE.
2: fs/proc/task_mmu: pagemap_scan_hugetlb_entry() compares the range
against HPAGE_SIZE rather than the hstate page size, so it never
write-protects gigantic hugetlb pages.
3: fs/proc/task_mmu: PAGEMAP_SCAN with PM_SCAN_WP_MATCHING over an
unpopulated hugetlb range self-deadlocks -- pagemap_scan_pte_hole()
calls uffd_wp_range() while walk_hugetlb_range() holds the hugetlb
vma lock for read, and hugetlb_change_protection() then takes it
for write. Install the marker inline instead.
4: mm/huge_memory: change_non_present_huge_pmd() drops pmd_swp_uffd_wp
on a device-private PMD permission downgrade, silently losing the
uffd-wp marker.
5: userfaultfd: must_wait() applies pte_write() to a locklessly read
PTE without checking pte_present(), so swap/migration entries
decode random offset bits and a thread can stay parked on a stale
fault.
6: userfaultfd: __VMA_UFFD_FLAGS feeds VMA_UFFD_MINOR_BIT (41) to
mk_vma_flags() unconditionally, an out-of-bounds write into the
single-word vma_flags_t on 32-bit. Build the mask from config-gated
per-mode masks so an unavailable bit is never materialised.
This patch (of 6):
make_uffd_wp_huge_pte() arms the UFFD_WP bit on a present HugeTLB PTE by
calling huge_ptep_modify_prot_commit() with a ptent snapshot that was
fetched without the corresponding huge_ptep_modify_prot_start(). The
start helper is what atomically clears the entry so the kernel-owned
snapshot stays consistent until the commit; without it, the hardware may
set Dirty or Accessed in the live PTE between the original read and the
commit, and huge_ptep_modify_prot_commit() (whose generic implementation
just calls set_huge_pte_at()) then writes the stale snapshot back over the
live hardware bits, losing the update.
The non-hugetlb sibling make_uffd_wp_pte() does this correctly via
ptep_modify_prot_start() / ptep_modify_prot_commit(). Mirror that pattern
for the present-PTE branch. The migration case stays as-is -- migration
entries are non-present, so there's no hardware update to race against. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: skip nlink update in cacheless mode to fix WARN_ON
v9fs_dec_count() unconditionally calls drop_nlink() on regular files,
even when the inode's nlink is already zero. In cacheless mode the
client refetches inode metadata from the server (the source of truth)
on every operation, so by the time v9fs_remove() returns, the locally
cached nlink may already reflect the post-unlink value:
1. Client initiates unlink, server processes it and sets nlink to 0
2. Client refetches inode metadata (nlink=0) before unlink returns
3. Client's v9fs_remove() completes successfully
4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0
This race is easily triggered under heavy unlink workloads, such as
stress-ng's unlink stressor, producing the following warning:
WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8
Call trace:
drop_nlink+0x4c/0xc8
v9fs_remove+0x1e0/0x250 [9p]
v9fs_vfs_unlink+0x20/0x38 [9p]
vfs_unlink+0x13c/0x258
...
In cacheless mode the server is authoritative and the inode is on its
way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count()
entirely when neither CACHE_META nor CACHE_LOOSE is set, which both
avoids the warning and removes a class of nlink races (two concurrent
unlinkers observing nlink > 0 and both calling drop_nlink()) that an
nlink == 0 guard alone would only narrow rather than close. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: avoid moving extents to occupied clusters
For non-auto OCFS2_IOC_MOVE_EXT operations, userspace supplies a physical
me_goal. ocfs2_move_extent() initializes new_phys_cpos from that goal and
expects ocfs2_probe_alloc_group() to replace it with a free run in the
target block group.
The probe currently leaves *phys_cpos unchanged if the scan reaches the
end of the group without finding a free run. An occupied goal at the last
bit can therefore survive the probe and be passed to
__ocfs2_move_extent(), which copies file data into a cluster still owned
by another inode before the bitmap is updated.
When the probe does find a free run, it also subtracts move_len from the
ending bit. The start of an N-bit run ending at i is i - N + 1, so the
current calculation can report the bit immediately before the free run.
Clear *phys_cpos before scanning and use the correct free-run start.
Callers already treat a zero result as -ENOSPC, so failed probes no longer
continue with an occupied caller-controlled goal. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: use unconditional synchronize_rcu() in isotp_release()
isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister()
and clears so->bound without waiting for a grace period. isotp_release()
uses so->bound to decide whether it needs to call synchronize_rcu()
before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it
skips that synchronize_rcu() and can cancel the timer while an
in-flight isotp_rcv() is still executing and about to re-arm it via
isotp_send_fc(), leading to a use-after-free timer callback on the
freed socket.
sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(),
therefore make isotp_release() always call synchronize_rcu() before
cancelling the timers, regardless of so->bound. This still closes the
original race (isotp_notify() clearing so->bound without waiting for
in-flight isotp_rcv() callers before isotp_release() cancels the RX
timer) without adding any RCU wait to the netdevice notifier path. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: serialize TX state transitions under so->rx_lock
The TX state machine (so->tx.state) is driven from three contexts:
sendmsg() claiming and progressing a transfer, the RX path consuming
Flow Control/echo frames, and two hrtimers timing out a stalled
transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with
hrtimer_cancel() calls made under so->rx_lock elsewhere left windows
where a frame or timer callback could act on a state that had already
moved on, corrupting an unrelated transfer.
so->rx_lock now covers the full lifecycle of a TX claim: sendmsg()
takes it to check so->tx.state is ISOTP_IDLE, switch it to
ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's
timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf()
already run under this lock via isotp_rcv(), and isotp_rcv_echo() now
takes it itself, so none of them can ever observe a transfer mid-claim.
This also means a transfer can no longer be handed to sendmsg()'s
cleanup paths (signal or send error) while another thread is
concurrently claiming or finishing it, so those paths can cancel
timers and reset the state unconditionally.
isotp_release() claims the socket the same way, so a racing sendmsg()
sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending.
Only the hrtimer callbacks stay outside so->rx_lock, since they run
under so->rx_lock's cancellation elsewhere and taking it themselves
would deadlock. so->tx_gen lets them recognize whether the transfer
they timed out is still the one currently active, so they don't
report an error against a transfer that has since completed or been
superseded. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF
Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly
synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op()
with call_rcu() and introduced the RX_NO_AUTOTIMER flag.
However, this flag check was omitted for thrtimer in the packet rx
fast-path. During BCM RX operation teardown, a concurrent RCU reader
(bcm_rx_handler) can race and re-arm thrtimer via
bcm_rx_update_and_send() after call_rcu() has been scheduled. Once
the RCU grace period elapses, bcm_op is freed. The subsequently
firing thrtimer then dereferences the deallocated op, causing a UAF.
Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not
fully close the TOCTOU race and introduces latency for every CAN frame.
Conversely, calling hrtimer_cancel() directly inside the RCU callback
(softirq context) is fatal as hrtimer_cancel() can sleep, triggering
a "scheduling while atomic" panic.
Resolve this by deferring the timer cancellation and memory free to a
dedicated unbound workqueue (bcm_wq). The RCU callback now queues a
work item to bcm_wq, which safely cancels both timers and deallocates
memory in sleepable process context. A dedicated workqueue is used to
prevent system-wide WQ saturation and is cleanly flushed/destroyed
on module unload to avoid rmmod page faults.
Since the deferred work can now outlive the calling context by an
unbounded amount, also take a reference on op->sk when it is assigned
and drop it only once the deferred work has cancelled both timers, so a
socket can no longer be freed out from under a still-armed timer whose
callback (bcm_send_to_user()) dereferences op->sk. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure
bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking
lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all
mutate both fields under that same lock. Because the lockless reads
and the locked writes are unordered with respect to each other, a
racing bcm_notify() (device unregister) or bcm_connect() (concurrent
bind on another thread sharing the socket) can make bcm_sendmsg()
observe an inconsistent combination, e.g. a stale bound=1 together
with the now-cleared ifindex=0, silently turning a socket bound to a
specific CAN interface into one that also matches "any" interface.
Keep the lockless bo->bound check purely as a fast-path reject, and
move the ifindex read (and a bo->bound re-check) into the locked
section, where every writer already serializes. This removes the
possibility of observing the two fields torn against each other,
rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs
on two independently updated fields. Annotate the now-purely-lockless
bo->bound accesses consistently across all its write sites.
Also fix bcm_rx_setup() silently returning success when the target
device disappears concurrently instead of reporting -ENODEV, so a
broken RX op is no longer left registered as if it had succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add locking when updating filter and timer values
KCSAN detected a simultaneous access to timer values that can be
overwritten in bcm_rx_setup() when updating timer and filter content
while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler()
run concurrently on incoming CAN traffic.
Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter
(nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new
per-op bcm_rx_update_lock, taken with the matching scope in the RX
handlers. memcpy_from_msg() is staged into a temporary buffer before the
lock is taken, since it can sleep and must not run under a spinlock.
hrtimer_cancel() is always called without bcm_rx_update_lock held, since
bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a
running callback would otherwise deadlock against the canceller.
Also close a related race: bcm_rx_setup() cleared the RTR flag in the
stored reply frame's can_id as a separate, unprotected step after the
frame content was already installed, so a concurrent bcm_rx_handler()
could transmit a stale reply with CAN_RTR_FLAG still set. Fold that
normalization into the initial frame preparation instead (on the staged
buffer for updates, directly on op->frames pre-registration for new
ops), so the installed frame is always atomically self-consistent.
bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected
snapshot of op->flags before deciding whether to call bcm_can_tx(),
but does not hold the lock across that call.
Also take a lock-protected snapshot of the currframe in bcm_can_tx()
to avoid partly overwrites by content updates in bcm_tx_setup().
Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset
op->currframe between the two locked sections in bcm_can_tx().
Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler().
kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it
cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: extend bcm_tx_lock usage for data and timer updates
Stage new CAN frame content for an existing tx op into a kmalloc()'d
buffer and validate it there, mirroring the approach already used in
bcm_rx_setup(). Only copy the validated data into op->frames while
holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler()
can no longer observe a partially updated or unvalidated frame.
Add a missing error path for memcpy_from_msg() when copying CAN frame
data from userspace.
Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup()
under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same
lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the
torn 64-bit ktime_t read on 32-bit platforms. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or
throttle timer has no defined semantics when matching frames arrive
from several interfaces: bcm_rx_handler() can run concurrently for
the same op on different CPUs, racing hrtimer_cancel()/
bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing
spurious RX_TIMEOUT notifications and last_frames corruption. The
same concurrency lets throttled multiplex frames from different
interfaces clobber the single rx_ifindex/rx_stamp fields shared by
the op.
Add op->if_detected to track the first interface that delivers a
matching frame while a timeout/throttle timer is configured, and
reject frames from any other interface for that op. The claim is
decided in bcm_rx_handler() before hrtimer_cancel() touches
op->timer, so a rejected frame can never disturb the claimed
interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME,
independent of kt_ival1/kt_ival2, since those may briefly hold a
stale value from an earlier non-RTR configuration.
The claim is released in bcm_notify() on NETDEV_UNREGISTER and in
bcm_rx_setup() when SETTIMER reconfigures the timer values.
A (re-)claim is only possible on CAN devices in NETREG_REGISTERED
dev->reg_state to cover the release in bcm_notify() where reg_state
becomes NETREG_UNREGISTERING until synchronize_net(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reset register bounds before narrowing retval range in check_mem_access()
When the BPF verifier processes a context load of an LSM hook return
value, it calls __mark_reg_s32_range() to narrow the register to the
hook's valid range. However, __mark_reg_s32_range() intersects the new
range with the register's existing bounds using max_t()/min_t() rather
than replacing them.
If the destination register carries stale bounds from a prior instruction
(e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than
reality. The verifier then believes it knows the register's exact value,
while at runtime the actual hook return value is loaded, creating a
verifier/runtime mismatch that can be used to bypass BPF memory safety
checks.
The else branch already calls mark_reg_unknown() to reset register state
before any narrowing. Apply the same reset in the is_retval path so
stale bounds are cleared before __mark_reg_s32_range() intersects. |
| Improper Verification of Cryptographic Signature vulnerability in Apache CXF's JAX-RS XML Security module. The JAX-RS XML Signature interceptors (XmlSigInHandler, XmlSigInInterceptor and the streaming XmlSecInInterceptor) did not ensure that the XML passed to the application was covered by the signature. An attacker with any document signed by a trusted key could wrap it in unsigned content, which the application would then treat as signed.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: Fix data races of skb_queue_len() readers on audit_queue
Multiple readers access audit_queue.qlen via skb_queue_len() without
holding the queue lock or using READ_ONCE(), while kauditd writes to
this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE()
protected by a spinlock. This constitutes data races.
All affected skb_queue_len(&audit_queue) call sites:
- kauditd_thread() wait_event_freezable() condition
- audit_receive_msg() AUDIT_GET handler (s.backlog assignment)
- audit_receive() backlog check
- audit_log_start() backlog check and pr_warn()
KCSAN reports the following conflicting access pattern (one example):
==================================================================
BUG: KCSAN: data-race in audit_log_start / skb_dequeue
write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57:
skb_dequeue+0x70/0xf0
kauditd_send_queue+0x71/0x220
kauditd_thread+0x1cb/0x430
kthread+0x1c2/0x210
ret_from_fork+0x162/0x1a0
ret_from_fork_asm+0x1a/0x30
read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1:
audit_log_start+0x2a0/0x6b0
audit_core_dumps+0x64/0xa0
do_coredump+0x14b/0x1260
get_signal+0xeb2/0xf70
arch_do_signal_or_restart+0x41/0x170
exit_to_user_mode_loop+0xa2/0x1c0
do_syscall_64+0x1a3/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0xe0
value changed: 0x00000001 -> 0x00000000
==================================================================
Resolve the race by switching to lockless helper skb_queue_len_lockless(),
which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE()
write accesses already present on the writer side.
[PM: line length tweak] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref
l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If
the connection is torn down while the timer is running or pending,
chan->conn can be freed, leading to a use-after-free when the timer
worker attempts to lock conn->lock:
| BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83
|
| CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full)
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
| Workqueue: events l2cap_chan_timeout
| Call Trace:
| <TASK>
| instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
| </TASK>
|
| Allocated by task 320:
| l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075
| l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452
| hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline]
| hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760
| hci_event_func net/bluetooth/hci_event.c:7796 [inline]
| hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847
| hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
|
| Freed by task 322:
| hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline]
| hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736
| hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405
| hci_dev_do_close net/bluetooth/hci_core.c:502 [inline]
| hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679
| vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690
| __fput+0x369/0x890 fs/file_table.c:510
| task_work_run+0x160/0x1d0 kernel/task_work.c:233
| get_signal+0xf5b/0x1120 kernel/signal.c:2810
| arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337
| __exit_to_user_mode_loop kernel/entry/common.c:64 [inline]
| exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98
| do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100
| entry_SYSCALL_64_after_hwframe+0x77/0x7f
|
| The buggy address belongs to the object at ffff8881298d9400
| which belongs to the cache kmalloc-512 of size 512
| The buggy address is located 336 bytes inside of
| freed 512-byte region [ffff8881298d9400, ffff8881298d9600)
Fix it by having chan->conn hold a reference to l2cap_conn (via
l2cap_conn_get) when the channel is added to the connection, and
releasing it in the channel destructor. This ensures the l2cap_conn
remains alive as long as the channel exists.
A new FLAG_DEL channel flag is introduced to indicate that the ch
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: remove multicast group from hash table on device destruction
When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through
the multicast list and calls ip_ma_put() on each membership, scheduling
them for RCU reclamation. However, they are not unlinked from the device's
multicast hash table (mc_hash).
Since the device remains published in dev->ip_ptr until after
ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash
can still locate and access the multicast group after its refcount is
decremented. If the RCU callback runs and frees the group while a reader is
accessing it, a use-after-free occurs.
Fix this by unlinking the multicast group from mc_hash using
ip_mc_hash_remove() before scheduling it for reclamation.
BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0
Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276
Call Trace:
<IRQ>
dump_stack_lvl+0x67/0x90
print_report+0x175/0x7c0
kasan_report+0x147/0x180
ip_check_mc_rcu+0x149/0x3f0
udp_v4_early_demux+0x36d/0x12d0
ip_rcv_finish_core+0xb8b/0x1390
ip_rcv_finish+0x54/0x120
NF_HOOK+0x213/0x2b0
__netif_receive_skb+0x126/0x340
process_backlog+0x4f2/0xf00
__napi_poll+0x92/0x2c0
net_rx_action+0x583/0xc60
handle_softirqs+0x236/0x7f0
do_softirq+0x57/0x80
</IRQ>
Allocated by task 2239:
kasan_save_track+0x3e/0x80
__kasan_kmalloc+0x72/0x90
____ip_mc_inc_group+0x31a/0xa40
__ip_mc_join_group+0x334/0x3f0
do_ip_setsockopt+0x16fa/0x2010
ip_setsockopt+0x3f/0x90
do_sock_setsockopt+0x1ad/0x300
Freed by task 0:
kasan_save_track+0x3e/0x80
kasan_save_free_info+0x40/0x50
__kasan_slab_free+0x3a/0x60
__rcu_free_sheaf_prepare+0xd4/0x220
rcu_free_sheaf+0x36/0x190
rcu_core+0x8d9/0x12f0
handle_softirqs+0x236/0x7f0 |
