| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Initialization vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote BGP peer to cause an rpd crash via an LLGR-stale route update readvertised to a configured non-LLGR peer group. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: strip GSO state from fragments before reassembly
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and
the next software segmentation point - udp_rcv_segment() on local
delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow
path - hands it to skb_segment(). skb_segment()'s frag_list walk
assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to
a tap by an unprivileged user in its own userns are enough:
kernel BUG at net/core/skbuff.c:4899!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2
RIP: 0010:skb_segment+0x20ca/0x48b0
Call Trace:
<TASK>
__udp_gso_segment+0x29a/0x27d0
udp4_ufo_fragment+0x458/0x6c0
inet_gso_segment+0x429/0x1340
skb_mac_gso_segment+0x233/0x4f0
__skb_gso_segment+0x308/0x660
udp_queue_rcv_skb+0x440/0xad0
udp_unicast_rcv_skb+0xc7/0x2c0
udp_rcv+0x16ce/0x2260
ip_protocol_deliver_rcu+0x197/0x2d0
ip_local_deliver+0x430/0x690
ip_rcv+0x16f/0x1f0
__netif_receive_skb_one_core+0x15e/0x1c0
__netif_receive_skb+0x1e/0x110
netif_receive_skb+0xf6/0x5c0
tun_rx_batched.isra.0+0x3ab/0x790
tun_get_user+0x17c3/0x3550
tun_chr_write_iter+0xba/0x1b0
vfs_write+0x646/0x1130
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
This runs with BH disabled, so it is a panic rather than an oops. The
same is reachable with CAP_NET_RAW in a netns where a defrag point
precedes a GSO point, and from a guest whose VMM forwards
virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by
commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting
gso_size mangled skb having linear-headed frag_list") and by
commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head
alloc types") do not cover it: page-backed heads skip them, and kmalloc
heads skip them when gso_size == skb_headlen(head), which the sender
controls.
An skb entering a frag queue is an IP fragment by definition and
cannot legitimately carry GSO state: GRO does not merge fragments and
the stack segments before it fragments, so only untrusted sources are
affected. This has been reachable since
commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first
path that let userspace attach GSO metadata to an IP fragment. Reset
the GSO fields of every fragment as it is queued, in
inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and
6lowpan reassembly share; then neither the head nor the frag_list
members of the reassembled skb carry them (the members matter too:
the ip_do_fragment()/ip6_fragment() fast paths send them out as they
are). The head may remain CHECKSUM_PARTIAL; that is already accepted
on receive and resolved by skb_checksum_help() in
ip_do_fragment()/ip6_fragment() on forward.
Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer
above, two further IPv4 frag_list geometries that reach
BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6
fragment-header variant (udp6_ufo_fragment()) each panic the unpatched
kernel; with this patch all four datagrams are delivered intact and
nothing is logged. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: options: reset DSS fields in case of unexpected size
A remote peer could send a malformed DSS with a wrong size, followed by
another DSS or MPC + Data. In this case, the first suboption will be
ignored, but leaving some fields written, which could lead to
inconsistency or access uninitialized data.
Explicitly reset the fields that could have been modified in case of
unexpected size. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix potential use-after-free in audit_del_rule()
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix RB-tree corruption in probe error path
The info->node RB-tree member is zero-initialized via kzalloc. If
a device does not support ATS, the device_rbtree_insert() call is
skipped. If a subsequent probe step fails, the error path jumps to
device_rbtree_remove(), which misinterprets the zeroed node as
a tree root and corrupts the device RB-tree.
Fix this by explicitly initializing the RB-node as empty using
RB_CLEAR_NODE() during initialization and guarding the removal with
RB_EMPTY_NODE(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: clean up ROC on failure
If the firmware fails to start the session protection, then we
do call iwl_mvm_roc_finished() here, but that won't do anything
at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set.
Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path.
If it started successfully before, it's already set, so that
doesn't matter, and if it didn't start it needs to be set to
clean up.
Not doing so will lead to a WARN_ON() later on a fresh remain-
on-channel, since the link is already active when activated as
it was never deactivated. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
Move the conditional loading of hardware DR6 with the guest's DR6 value
out of the core .vcpu_run() loop to fix a bug where KVM can load hardware
with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest,
KVM disables DR interception and loads the guest's values into hardware on
VM-Enter and saves them on VM-Exit. This allows the guest to access DRs
at will, e.g. so that a sequence of DR accesses to configure a breakpoint
only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also
identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)
and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading
DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for
KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas
VMX requires software to manually load the guest value, and so loading the
guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done
_inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common
x86, again outside of the core run loop. If the guest modifies DR6 (in
hardware, when DR interception is disabled), and then the next VM-Exit is
a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and
clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX
preemption timer in the fastpath, and the window between hardware DR6
being modified (in guest context) and DR6 being read by guest software is
orders of magnitude larger in a nested setup. E.g. in non-nested, the
VMX preemption timer would need to fire precisely between #DB injection
and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the
window where hardware DR6 is "dirty" extends all the way from L1 writing
DR6 to VMRESUME (in L1).
L1's view:
==========
<L1 disables DR interception>
CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0
A: L1 Writes DR6
CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0
CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0
L2 reads DR6, L1 disables DR interception
CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure
CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT
L1 reads DR6 (confirms failure)
CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view:
==========
L2 reads DR6, arch.dr6 = 0
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Ignore frags from uninitialized peer in dp.
When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.
In this certain scenario, a fragmented packet is received for
self peer, for which rx_tid and rx_frags are not initialized in
datapath. While handling this fragment, crash is observed as the
rx_frag list is uninitialised and when we walk in
ath11k_dp_rx_h_sort_frags, skb null leads to exception.
To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.
Call trace:
ath11k_dp_process_rx_err+0x550/0x1084 [ath11k]
ath11k_dp_service_srng+0x70/0x370 [ath11k]
0xffffffc009693a04
__napi_poll+0x30/0xa4
net_rx_action+0x118/0x270
__do_softirq+0x10c/0x244
irq_exit+0x64/0xb4
__handle_domain_irq+0x88/0xac
gic_handle_irq+0x74/0xbc
el1_irq+0xf0/0x1c0
arch_cpu_idle+0x10/0x18
do_idle+0x104/0x248
cpu_startup_entry+0x20/0x64
rest_init+0xd0/0xdc
arch_call_rest_init+0xc/0x14
start_kernel+0x480/0x4b8
Code: f9400281 f94066a2 91405021 b94a0023 (f9406401)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix return status of RMI log page on allocation failure
nvmet_execute_get_log_page_rmi() leaves 'status' holding NVME_SC_SUCCESS
(set by the successful nvmet_req_find_ns() call) when the kzalloc() for
the log buffer fails. It then jumps to the out label and completes the
request with a success status, so the host is told the command succeeded
while no data was transferred.
Initialize 'status' to NVME_SC_INTERNAL, matching the smart log handler,
so an allocation failure is reported as an internal error. |
| In the Linux kernel, the following vulnerability has been resolved:
md: remove REQ_NOWAIT support from raid1/10/456
REQ_NOWAIT support in md personalities that can block internally is
fundamentally incomplete. While reads can avoid some blocking paths,
write requests can still encounter cases where one mirror succeeds while
another returns -EAGAIN. At that point md cannot distinguish queue
pressure from a real device failure, so it can neither record a bad
block nor safely retry the write without REQ_NOWAIT, leaving mirrors
with divergent data.
Rather than continue advertising REQ_NOWAIT support for personalities
that cannot implement it correctly, remove it from raid1, raid10 and
raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to
their underlying devices; stacked limits will still clear the feature if
any component device lacks REQ_NOWAIT support. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: clear stale link state on full reset
After a full chip reset, mac80211 reconfig replays interface, link and
channel context setup. mt7996_vif_link_add() short-circuits when the
link_id is still marked in mvif->valid_links, a state introduced for
postponing link teardown to interface removal. The reset path frees the
link structures without clearing those bits, so the replayed setup never
re-creates dev_info/bss_info/STA records in the restarted firmware and
never re-registers the link wcid, leaving the device inoperative.
The reset path also leaks every allocated MLD index: per-link indices
and the per-vif group/remap indices are re-allocated from scratch during
reconfig, but the old bits stay set in the masks, so repeated full
resets exhaust the index space.
Clear valid_links in the reset vif iterator and reset the MLD index
masks alongside the existing omac_mask clearing. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: Fix the condition to enable over-io-uring
The existing condition in fuse_uring_cmd() is there only to avoid
disabling io-uring for connections that already run with it, missing
was a condition to refuse any IORING_OP_URING_CMD if the
connection/channel didn't get enabled because of missing FUSE_INIT
reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in
fuse_uring_ready() doesn't work and IO could already be going on and
cause deadlock states (at a minimum one between fch->bg_lock and
queue->lock).
The change itself is trivial, but brings behavior change,
FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers
to accept any IORING_OP_URING_CMD. Libfuse does that and the only
non-libfuse implementation I found (fractal-fuse) also does it.
Qemu patches for fuse-io-uring are not merged yet, as far as I know.
Moved up is the smp_load_acquire(&fch->initialized) check, as a
fuse-server implementation might try to setup io-uring before FUSE_INIT
is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN.
Also fixed is a stale comment that explains the handling of the
FUSE_OVER_IO_URING flag in early RFC versions.
If there should be a report from any library or application we
probably need to revert this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: undo netns switch if renaming the wiphy fails
Once all the interfaces have been moved, cfg80211_switch_netns()
moves the wiphy itself by setting its network namespace and then
renaming it, which makes sysfs move it. The rename can fail (but
only on allocation failures), leaving things mixed up and hitting
the warning there.
Ignoring it isn't great, undo the move and let the change fail
in this case. If undo fails then WARN, then things would again
be stuck in two different network namespaces. |
| Unspecified vulnerability in Oracle Java SE 6u101, 7u85, and 8u60, and Java SE Embedded 8u51, allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to Serialization. |
| drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case. |
| A defect in the Qt for MCUs core string handling causes heap memory corruption. When an application passes text into Qt Quick Ultralite using the public Qul::String interface type, and that text is held in a std::string, the conversion to the internal string type copies the pointer without taking ownership of it. Two objects then release the same memory, producing a double free, an invalid free, or a use-after-free. |
| Improper initialization in the UEFI firmware for some Intel platforms within Ring 0: Bare Metal OS may allow an information disclosure. System software adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object's initialization is mishandled. |
| On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program. |
