| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge
Nicholas Carlini reported a bug in precision backtracking mechanism
for BPF_LD | BPF_{IND,ABS} instructions. These instructions are
modelled as two branches:
- fallthrough;
- implicit exit from current subprogram.
The implicit exit case was not handled by the backtrack_insn()
function. When backtracking such a path backtrack_insn() did not
call bt_subprog_enter(), which meant that backtracking continued
manipulating precision marks in a caller frame, while looking at
instructions in a callee frame.
This lead to segmentation faults during verification (see the
selftest), or unsound state pruning. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues()
dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA
topology information for the PCI device, such as single-socket boards
that don't expose device-to-node affinity. Passing -1 directly into
cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds
array read caught by UBSAN:
UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
Fall back to cpu_online_mask when no NUMA node is available, rather than
assuming dev_to_node() always returns a valid node index. |
| The microcontroller lacks enabled debug lock bits, leaving the physical Single-Wire (SWS) debugging interface completely unrestricted. This allows an attacker with physical access to use a hardware programmer to dump the entire production firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/gsc: Fix double-free of managed BO in error path
The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO
allocated with xe_managed_bo_create_pin_map() via
xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm
cleanup action registered, this causes a double-free when devm
unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
(cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix out-of-bounds access for twsk in tcp_ao_established_key().
lockdep_sock_is_held() was added in tcp_ao_established_key()
by the cited commit.
It can be called from tcp_v[46]_timewait_ack() with twsk.
Since it does not have sk->sk_lock, the lockdep annotation
results in out-of-bound access.
$ pahole -C tcp_timewait_sock vmlinux | grep size
/* size: 288, cachelines: 5, members: 8 */
$ pahole -C sock vmlinux | grep sk_lock
socket_lock_t sk_lock; /* 440 192 */
Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate VMBus packet size in receive callback
hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.
Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single switch on
msg->vid_hdr.type then computes the type-specific payload size: the
three completion-driving types (SYNTHVID_VERSION_RESPONSE,
SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through
to a shared exit that requires that size before memcpy/complete, while
SYNTHVID_FEATURE_CHANGE validates its own payload and returns before
reading is_dirt_needed. Unknown types are dropped.
SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills
resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT
array. Validate the fixed prefix first so resolution_count can be
read, bound it against the array, then require only the count-sized
array, so the shorter responses the host actually sends are accepted.
Only run the sub-handler when vmbus_recvpacket() returned success. The
memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE
only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead
reports the required length, which can exceed hv->recv_buf, so copying
bytes_recvd would read and write past the 16 KiB buffers. Gating on the
success return keeps the copy bounded. The nonzero-return path is itself
a malformed-message case and is now logged rather than silently skipped;
channel recovery is not attempted.
Rejected packets are reported via drm_err_ratelimited() rather than
silently dropped, matching the CoCo-hardened pattern in
hv_kvp_onchannelcallback(). |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| Binding to an unrestricted IP address in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to bypass authentication. User interaction is required for triggering this vulnerability. |
| External control of system or configuration setting in Smart Switch prior to version 3.7.74.7 allows local attackers to bypass required user interaction. |
| An integer underflow in the KMS endpoint-parsing logic of MongoDB libmongocrypt can cause an allocation failure that terminates the application process. This can occur when an authenticated user modifies a key document in the key vault collection, or when an application accepts a KMS endpoint containing a colon after its path or query during key creation. The issue does not access memory outside its allocated bounds. |
| An out-of-bounds read in SCRAM authentication response parsing in the MongoDB C Driver can read one byte beyond a fixed-size buffer when processing a malformed server-final message. A server or network intermediary able to provide this message before server-signature verification can cause the application using the driver to terminate. The extra byte is not returned through the protocol. |
| Dell SupportAssist OS Recovery, versions prior to 5.5.16.3, contain an External Control of System or Configuration Setting vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| GPAC before 26.07.0 contains an integer underflow in gf_xml_sax_parse_intern() in src/utils/xml_parser.c that causes a heap-based buffer overflow when completing partially buffered entities. Attackers can convince a user to process a crafted XML or XMT file with MP4Box, overflowing xml_sax_append_string() size arithmetic to corrupt heap memory and crash the process. |
| GPAC before 26.07.0 contains a stack-based buffer overflow vulnerability in gf_filter_pid_resolve_file_template_ex() in src/filter_core/filter_pid.c that allows local attackers to write past fixed GF_MAX_PATH stack buffers. Attackers can convince a user to segment a crafted NHML input referencing an overly long media file name with MP4Box -dash to crash the process. |
| Phoboslab pl_mpeg through commit c871f2b contains an integer underflow in plm_demux_seek() that allows attackers to trigger heap out-of-bounds reads via crafted MPEG-PS files. Attackers can supply a PES packet with payload under 6 bytes, wrapping the packet->length - 6 loop bound during force_intra seeking to crash applications. |
| GPAC before 26.07.0 contains a heap-based out-of-bounds read vulnerability in xmt_parse_mf_field() in loader_xmt.c caused by unchecked cursor advancement when splitting multi-value XMT-A fields. Attackers can supply a crafted XMT scene file opened with MP4Box to make xmt_parse_string() read past the heap buffer and crash the process. |
| BZFlag bzfs before 2.4.32 contains a heap out-of-bounds write vulnerability in NetHandler::tcpReceive() that allows remote unauthenticated attackers to corrupt heap memory by sending a TCP message with a body length of exactly 1024. Attackers can overwrite the tcplen receive offset with a negative value to write controlled bytes before the buffer, crashing the server or executing commands as the bzfs user. |
| Tight JPEG decoding in TightVNC and UltraVNC viewers contains a heap-based buffer overflow because an attacker-controlled framebuffer rectangle width is not validated against a fixed-size decoding buffer. A malicious VNC server can cause an out-of-bounds heap write when a user connects, resulting in application crash and potentially other memory-corruption impacts. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |