| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return. |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From version 4.0.0 to before version 4.0.5, the Sync Service's ConfigMap-backed provider (server/sync/sync_cm.go) performs zero authorization checks on all CRUD operations (create, read, update, delete). Any authenticated user — including those using fake Bearer tokens — can create, read, update, and delete Kubernetes ConfigMaps containing synchronization limits. This issue has been patched in version 4.0.5. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
We observe spurious "Synchronous External Abort" exceptions
(ESR=0x96000010) and kernel crashes on Monaco-based platforms.
These faults are caused by the kernel inadvertently accessing
hypervisor-owned memory that is not properly marked as reserved.
>From boot log, The Qualcomm hypervisor reports the memory range
at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned:
qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0
However, the EFI memory map provided by firmware only reserves the
subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion
(0x91a88000–0x91afffff) is incorrectly reported as conventional
memory (from efi debug):
efi: 0x000091a40000-0x000091a87fff [Reserved...]
efi: 0x000091a88000-0x0000938fffff [Conventional...]
As a result, the allocator may hand out PFNs inside the hypervisor
owned region, causing fatal aborts when the kernel accesses those
addresses.
Add a reserved-memory carveout for the Gunyah hypervisor metadata
at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not
map or allocate from this area.
For the record:
Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC)
UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ptp: don't WARN when controlling PF is unavailable
In VFIO passthrough setups, it is possible to pass through only a PF
which doesn't own the source timer. In that case the PTP controlling PF
(adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp()
returns NULL and triggers WARN_ON() in ice_ptp_setup_pf().
Since this is an expected behavior in that configuration, replace
WARN_ON() with an informational message and return -EOPNOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix event ring index not programmed for IPA v5.0+
For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to
CH_C_CNTXT_1. The v5.0 register definition intended to define this
field in the CH_C_CNTXT_1 fmask array but used the old identifier of
ERINDEX instead of CH_ERINDEX.
Without a valid event ring, GSI channels could never signal transfer
completions. This caused gsi_channel_trans_quiesce() to block
forever in wait_for_completion().
At least for IPA v5.2 this resolves an issue seen where runtime
suspend, system suspend, and remoteproc stop all hanged forever. It
also meant the IPA data path was completely non functional. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.9.0, validate_url() in backend/open_webui/retrieval/web/utils.py calls validators.ipv6(ip, private=True), but the validators library does NOT implement the private keyword for IPv6 — the call raises a ValidationError (which is falsy in a boolean context), so every IPv6 address passes the filter. In addition, IPv4-mapped IPv6 (::ffff:10.0.0.1) bypasses the IPv4 check entirely, and several reserved IPv4 ranges (0.0.0.0/8, 100.64.0.0/10, 192.0.0.0/24, etc.) are not blocked. This vulnerability is fixed in 0.9.0. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.9.0, Open WebUI allows admins to restrict which API endpoints an API key can access. When an API key is restricted from /api/v1/messages, requests using the Authorization: Bearer sk-... header are correctly blocked with 403. However, the same key sent via the x-api-key header bypasses the restriction entirely — the request is authenticated, the model is invoked, and a full response is returned. This vulnerability is fixed in 0.9.0. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.9.0, a user just needs to use the API endpoint: /api/chat/completions with their own API key (generated in OWUI) and the Chat ID of another user to continue the conversation of the other user. This vulnerability is fixed in 0.9.0. |
| Arcane is an interface for managing Docker containers, images, networks, and volumes. Prior to version 1.18.0, four GET endpoints under /api/templates* in Arcane's Huma backend are registered without any Security requirement, allowing any unauthenticated network client to list and read the full Compose YAML and .env content of every custom template stored in the instance. Because Arcane's UI exposes a "Save as Template" flow on the project / swarm-stack creation pages that persists the operator's real env content (database passwords, API keys, etc.) verbatim, this missing authorization is an unauthenticated read of operator secrets in practice — not a theoretical info-disclosure. The frontend explicitly treats /customize/templates/* as an authenticated area (PROTECTED_PREFIXES in frontend/src/lib/utils/redirect.util.ts), and every CRUD operation (POST/PUT/DELETE) on the same paths requires a Bearer/API key, so this is a clear backend authorization gap, not intended public access. This issue has been patched in version 1.18.0. |
| A flaw was found in firewalld. A local unprivileged user can exploit this vulnerability by mis-authorizing two runtime D-Bus (Desktop Bus) setters, setZoneSettings2 and setPolicySettings. This mis-authorization allows the user to modify the runtime firewall state without proper authentication, leading to unauthorized changes in network security configurations. |
| Medical Management System a81df1ce700a9662cb136b27af47f4cbde64156b is vulnerable to Insecure Permissions, which allows arbitrary user password reset. |
| Cross site scripting in some Zoom Workplace Apps may allow an unauthenticated user to conduct a loss of integrity via adjacent network access. |
| Cross site scripting in some Zoom Workplace Apps may allow an unauthenticated user to conduct a loss of integrity via adjacent network access. |
| CKAN is an open-source DMS (data management system) for powering data hubs and data portals. Prior to 2.10.10 and 2.11.5, a vulnerability in datastore_search_sql allowed attackers to inject SQL in order to gain access to private resources and PostgreSQL system information This vulnerability is fixed in 2.10.10 and 2.11.5. |
| Signal K Server is a server application that runs on a central hub in a boat. Prior to version 2.25.0, the HTTP login endpoints (POST /login and POST /signalk/v1/auth/login) are protected by express-rate-limit (default: 100 attempts per 10-minute window, configurable via HTTP_RATE_LIMITS). The WebSocket login path — sending {login: {username, password}} messages over an established WebSocket connection — calls app.securityStrategy.login() directly without any rate limiting. An attacker can bypass HTTP rate limiting entirely by opening a WebSocket connection and attempting unlimited password guesses at the speed bcrypt allows (~20 attempts/sec with 10 salt rounds). This issue has been patched in version 2.25.0. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.9.0, any authenticated user can permanently delete files owned by other users via DELETE /api/v1/files/{id} when the target file is referenced in any shared chat. The has_access_to_file() authorization gate unconditionally grants access through its shared-chat branch. It checks neither the requesting user's identity nor the type of operation being performed. File UUIDs (which would otherwise be impractical to guess) are disclosed to any user with read access to a knowledge base via GET /api/v1/knowledge/{id}/files. This vulnerability is fixed in 0.9.0. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.9.0, he LDAP and OAuth authentication flows use a TOCTOU (Time-of-Check-Time-of-Use) pattern for first-user admin role assignment. The regular signup handler (signup_handler in auths.py, line 663) was explicitly patched to prevent this race with the comment "Insert with default role first to avoid TOCTOU race", but the LDAP and OAuth code paths were never updated with the same fix. This vulnerability is fixed in 0.9.0. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer
syzbot reported a f2fs bug as below:
BUG: KMSAN: uninit-value in f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_finish_read_bio+0xe1e/0x1d60 fs/f2fs/data.c:177
f2fs_read_end_io+0x6ab/0x2220 fs/f2fs/data.c:-1
bio_endio+0x1006/0x1160 block/bio.c:1792
submit_bio_noacct+0x533/0x2960 block/blk-core.c:891
submit_bio+0x57a/0x620 block/blk-core.c:926
blk_crypto_submit_bio include/linux/blk-crypto.h:203 [inline]
f2fs_submit_read_bio+0x12c/0x360 fs/f2fs/data.c:557
f2fs_submit_page_bio+0xee2/0x1450 fs/f2fs/data.c:775
read_node_folio+0x384/0x4b0 fs/f2fs/node.c:1481
__get_node_folio+0x5db/0x15d0 fs/f2fs/node.c:1576
f2fs_get_inode_folio+0x40/0x50 fs/f2fs/node.c:1623
do_read_inode fs/f2fs/inode.c:425 [inline]
f2fs_iget+0x1209/0x9380 fs/f2fs/inode.c:596
f2fs_fill_super+0x8f5a/0xb2e0 fs/f2fs/super.c:5184
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
f2fs_get_tree+0x35/0x40 fs/f2fs/super.c:5436
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3763 [inline]
do_new_mount+0x885/0x1dd0 fs/namespace.c:3839
path_mount+0x7a2/0x20b0 fs/namespace.c:4159
do_mount fs/namespace.c:4172 [inline]
__do_sys_mount fs/namespace.c:4361 [inline]
__se_sys_mount+0x704/0x7f0 fs/namespace.c:4338
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4338
x64_sys_call+0x39f0/0x3ea0 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x134/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is: in f2fs_finish_read_bio(), we may access uninit data
in folio if we failed to read the data from device into folio, let's add
a check condition to avoid such issue. |
| Wasmtime is a runtime for WebAssembly. From 30.0.0 to 36.0.8, 43.0.2, and 44.0.1, Wasmtime's allocation logic for a WebAssembly table contained checked arithmetic which panicked on overflow. This overflow is possible to trigger, and thus panic, when a table with an extremely large size is allocated. This is possible with the WebAssembly memory64 proposal where tables can have sizes in the 64-bit range as opposed to the previous 32-bit range which would not overflow. The panic happens when attempting to create a very large table, such as when instantiating a WebAssembly module or component. This vulnerability is fixed in 36.0.8, 43.0.2, and 44.0.1. |
