| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A cryptographic vulnerability exists in Node.js <19.2.0, <18.14.1, <16.19.1, <14.21.3 that in some cases did does not clear the OpenSSL error stack after operations that may set it. This may lead to false positive errors during subsequent cryptographic operations that happen to be on the same thread. This in turn could be used to cause a denial of service. |
| A OS Command Injection vulnerability exists in Node.js versions <14.21.1, <16.18.1, <18.12.1, <19.0.1 due to an insufficient IsAllowedHost check that can easily be bypassed because IsIPAddress does not properly check if an IP address is invalid before making DBS requests allowing rebinding attacks.The fix for this issue in https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-32212 was incomplete and this new CVE is to complete the fix. |
| A weak randomness in WebCrypto keygen vulnerability exists in Node.js 18 due to a change with EntropySource() in SecretKeyGenTraits::DoKeyGen() in src/crypto/crypto_keygen.cc. There are two problems with this: 1) It does not check the return value, it assumes EntropySource() always succeeds, but it can (and sometimes will) fail. 2) The random data returned byEntropySource() may not be cryptographically strong and therefore not suitable as keying material. |
| Next.js is a React framework that can provide building blocks to create web applications. All of the following must be true to be affected by this CVE: Next.js version 12.2.3, Node.js version above v15.0.0 being used with strict `unhandledRejection` exiting AND using next start or a [custom server](https://nextjs.org/docs/advanced-features/custom-server). Deployments on Vercel ([vercel.com](https://vercel.com/)) are not affected along with similar environments where `next-server` isn't being shared across requests. |
| undici is an HTTP/1.1 client, written from scratch for Node.js. It is possible to inject CRLF sequences into request headers in undici in versions less than 5.7.1. A fix was released in version 5.8.0. Sanitizing all HTTP headers from untrusted sources to eliminate `\r\n` is a workaround for this issue. |
| Authorization headers are cleared on cross-origin redirect. However, cookie headers which are sensitive headers and are official headers found in the spec, remain uncleared. There are active users using cookie headers in undici. This may lead to accidental leakage of cookie to a 3rd-party site or a malicious attacker who can control the redirection target (ie. an open redirector) to leak the cookie to the 3rd party site. This was patched in v5.7.1. By default, this vulnerability is not exploitable. Do not enable redirections, i.e. `maxRedirections: 0` (the default). |
| undici is an HTTP/1.1 client, written from scratch for Node.js.`undici` is vulnerable to SSRF (Server-side Request Forgery) when an application takes in **user input** into the `path/pathname` option of `undici.request`. If a user specifies a URL such as `http://127.0.0.1` or `//127.0.0.1` ```js const undici = require("undici") undici.request({origin: "http://example.com", pathname: "//127.0.0.1"}) ``` Instead of processing the request as `http://example.org//127.0.0.1` (or `http://example.org/http://127.0.0.1` when `http://127.0.0.1 is used`), it actually processes the request as `http://127.0.0.1/` and sends it to `http://127.0.0.1`. If a developer passes in user input into `path` parameter of `undici.request`, it can result in an _SSRF_ as they will assume that the hostname cannot change, when in actual fact it can change because the specified path parameter is combined with the base URL. This issue was fixed in `undici@5.8.1`. The best workaround is to validate user input before passing it to the `undici.request` call. |
| undici is an HTTP/1.1 client, written from scratch for Node.js.`=< undici@5.8.0` users are vulnerable to _CRLF Injection_ on headers when using unsanitized input as request headers, more specifically, inside the `content-type` header. Example: ``` import { request } from 'undici' const unsanitizedContentTypeInput = 'application/json\r\n\r\nGET /foo2 HTTP/1.1' await request('http://localhost:3000, { method: 'GET', headers: { 'content-type': unsanitizedContentTypeInput }, }) ``` The above snippet will perform two requests in a single `request` API call: 1) `http://localhost:3000/` 2) `http://localhost:3000/foo2` This issue was patched in Undici v5.8.1. Sanitize input when sending content-type headers using user input as a workaround. |
| The crc32_big function in crc32.c in zlib 1.2.8 might allow context-dependent attackers to have unspecified impact via vectors involving big-endian CRC calculation. |
| inffast.c in zlib 1.2.8 might allow context-dependent attackers to have unspecified impact by leveraging improper pointer arithmetic. |
| There is a carry propagating bug in the Broadwell-specific Montgomery multiplication procedure in OpenSSL 1.0.2 and 1.1.0 before 1.1.0c that handles input lengths divisible by, but longer than 256 bits. Analysis suggests that attacks against RSA, DSA and DH private keys are impossible. This is because the subroutine in question is not used in operations with the private key itself and an input of the attacker's direct choice. Otherwise the bug can manifest itself as transient authentication and key negotiation failures or reproducible erroneous outcome of public-key operations with specially crafted input. Among EC algorithms only Brainpool P-512 curves are affected and one presumably can attack ECDH key negotiation. Impact was not analyzed in detail, because pre-requisites for attack are considered unlikely. Namely multiple clients have to choose the curve in question and the server has to share the private key among them, neither of which is default behaviour. Even then only clients that chose the curve will be affected. |
| inftrees.c in zlib 1.2.8 might allow context-dependent attackers to have unspecified impact by leveraging improper pointer arithmetic. |
| There is a carry propagating bug in the x86_64 Montgomery squaring procedure in OpenSSL 1.0.2 before 1.0.2k and 1.1.0 before 1.1.0d. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be very significant and likely only accessible to a limited number of attackers. An attacker would additionally need online access to an unpatched system using the target private key in a scenario with persistent DH parameters and a private key that is shared between multiple clients. For example this can occur by default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very similar to CVE-2015-3193 but must be treated as a separate problem. |
| Node.js had a bug in versions 8.X and 9.X which caused buffers to not be initialized when the encoding for the fill value did not match the encoding specified. For example, 'Buffer.alloc(0x100, "This is not correctly encoded", "hex");' The buffer implementation was updated such that the buffer will be initialized to all zeros in these cases. |
| The semver package before 4.3.2 for Node.js allows attackers to cause a denial of service (CPU consumption) via a long version string, aka a "regular expression denial of service (ReDoS)." |
| Node.js before 4.8.5, 6.x before 6.11.5, and 8.x before 8.8.0 allows remote attackers to cause a denial of service (uncaught exception and crash) by leveraging a change in the zlib module 1.2.9 making 8 an invalid value for the windowBits parameter. |
| Node.js v4.0 through v4.8.3, all versions of v5.x, v6.0 through v6.11.0, v7.0 through v7.10.0, and v8.0 through v8.1.3 was susceptible to hash flooding remote DoS attacks as the HashTable seed was constant across a given released version of Node.js. This was a result of building with V8 snapshots enabled by default which caused the initially randomized seed to be overwritten on startup. |
| Node.js was affected by OpenSSL vulnerability CVE-2017-3737 in regards to the use of SSL_read() due to TLS handshake failure. The result was that an active network attacker could send application data to Node.js using the TLS or HTTP2 modules in a way that bypassed TLS authentication and encryption. |
| The c-ares function `ares_parse_naptr_reply()`, which is used for parsing NAPTR responses, could be triggered to read memory outside of the given input buffer if the passed in DNS response packet was crafted in a particular way. |
| If an SSL/TLS server or client is running on a 32-bit host, and a specific cipher is being used, then a truncated packet can cause that server or client to perform an out-of-bounds read, usually resulting in a crash. For OpenSSL 1.1.0, the crash can be triggered when using CHACHA20/POLY1305; users should upgrade to 1.1.0d. For Openssl 1.0.2, the crash can be triggered when using RC4-MD5; users who have not disabled that algorithm should update to 1.0.2k. |
