| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_wavparse_smpl_chunk function within gstwavparse.c. This function attempts to read 4 bytes from the data + 12 offset without checking if the size of the data buffer is sufficient. If the buffer is too small, the function reads beyond its bounds. This vulnerability may result in reading 4 bytes out of the boundaries of the data buffer. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An Use-After-Free read vulnerability has been discovered affecting the processing of CodecPrivate elements in Matroska streams. In the GST_MATROSKA_ID_CODECPRIVATE case within the gst_matroska_demux_parse_stream function, a data chunk is allocated using gst_ebml_read_binary. Later, the allocated memory is freed in the gst_matroska_track_free function, by the call to g_free (track->codec_priv). Finally, the freed memory is accessed in the caps_serialize function through gst_value_serialize_buffer. The freed memory will be accessed in the gst_value_serialize_buffer function. This results in a UAF read vulnerability, as the function tries to process memory that has already been freed. This vulnerability is fixed in 1.24.10. |
| Integer overflow in avidemux element in gst_avi_demux_invert function which allows a heap overwrite while parsing avi files. Potential for arbitrary code execution through heap overwrite. |
| The gst_asf_demux_process_ext_content_desc function in gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer allows remote attackers to cause a denial of service (out-of-bounds heap read) via vectors involving extended content descriptors. |
| DOS / potential heap overwrite in mkv demuxing using bzip decompression. Integer overflow in matroskademux element in bzip decompression function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite. If the libc uses mmap for large chunks, and the OS supports mmap, then it is just a segfault (because the realloc before the integer overflow will use mremap to reduce the size of the chunk, and it will start to write to unmapped memory). However, if using a libc implementation that does not use mmap, or if the OS does not support mmap while using libc, then this could result in a heap overwrite. |
| DOS / potential heap overwrite in mkv demuxing using lzo decompression. Integer overflow in matroskademux element in lzo decompression function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite. If the libc uses mmap for large chunks, and the OS supports mmap, then it is just a segfault (because the realloc before the integer overflow will use mremap to reduce the size of the chunk, and it will start to write to unmapped memory). However, if using a libc implementation that does not use mmap, or if the OS does not support mmap while using libc, then this could result in a heap overwrite. |
| DOS / potential heap overwrite in mkv demuxing using HEADERSTRIP decompression. Integer overflow in matroskaparse element in gst_matroska_decompress_data function which causes a heap overflow. Due to restrictions on chunk sizes in the matroskademux element, the overflow can't be triggered, however the matroskaparse element has no size checks. |
| Multiple use-after-free vulnerabilities in the (1) gst_mini_object_unref, (2) gst_tag_list_unref, and (3) gst_mxf_demux_update_essence_tracks functions in GStreamer before 1.10.3 allow remote attackers to cause a denial of service (crash) via vectors involving stream tags, as demonstrated by 02785736.mxf. |
| The gst_ps_demux_parse_psm function in gst/mpegdemux/gstmpegdemux.c in gst-plugins-bad in GStreamer allows remote attackers to cause a denial of service (invalid memory read and crash) via vectors involving PSM parsing. |
| GStreamer is a library for constructing graphs of media-handling components. An uninitialized stack variable vulnerability has been identified in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. When size < 4, the program calls gst_buffer_unmap with an uninitialized map variable. Then, in the gst_memory_unmap function, the program will attempt to unmap the buffer using the uninitialized map variable, causing a function pointer hijack, as it will jump to mem->allocator->mem_unmap_full or mem->allocator->mem_unmap. This vulnerability could allow an attacker to hijack the execution flow, potentially leading to code execution. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in the function qtdemux_parse_theora_extension within qtdemux.c. The vulnerability occurs due to an underflow of the gint size variable, which causes size to hold a large unintended value when cast to an unsigned integer. This 32-bit negative value is then cast to a 64-bit unsigned integer (0xfffffffffffffffa) in a subsequent call to gst_buffer_new_and_alloc. The function gst_buffer_new_allocate then attempts to allocate memory, eventually calling _sysmem_new_block. The function _sysmem_new_block adds alignment and header size to the (unsigned) size, causing the overflow of the 'slice_size' variable. As a result, only 0x89 bytes are allocated, despite the large input size. When the following memcpy call occurs in gst_buffer_fill, the data from the input file will overwrite the content of the GstMapInfo info structure. Finally, during the call to gst_memory_unmap, the overwritten memory may cause a function pointer hijack, as the mem->allocator->mem_unmap_full function is called with a corrupted pointer. This function pointer overwrite could allow an attacker to alter the execution flow of the program, leading to arbitrary code execution. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in gst_wavparse_cue_chunk within gstwavparse.c. The vulnerability happens due to a discrepancy between the size of the data buffer and the size value provided to the function. This mismatch causes the comparison if (size < 4 + ncues * 24) to fail in some cases, allowing the subsequent loop to access beyond the bounds of the data buffer. The root cause of this discrepancy stems from a miscalculation when clipping the chunk size based on upstream data size. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in gst_wavparse_adtl_chunk within gstwavparse.c. This vulnerability arises due to insufficient validation of the size parameter, which can exceed the bounds of the data buffer. As a result, an OOB read occurs in the following while loop. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. |
| GStreamer SRT File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of SRT subtitle files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20968. |
| The gst_riff_create_audio_caps function in gst-libs/gst/riff/riff-media.c in gst-plugins-base in GStreamer before 1.10.3 does not properly limit recursion, which allows remote attackers to cause a denial of service (stack overflow and crash) via vectors involving nested WAVEFORMATEX. |
| The qtdemux_parse_samples function in gst/isomp4/qtdemux.c in gst-plugins-good in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds heap read) via vectors involving the current stts index. |
| The gst_avi_demux_parse_ncdt function in gst/avi/gstavidemux.c in gst-plugins-good in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds heap read) via vectors involving ncdt tags. |
| GStreamer H266 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of H266 sei messages. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27381. |
| GStreamer EXIF Metadata Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of EXIF metadata. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process.
. Was ZDI-CAN-23896. |
| GStreamer FLAC File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of FLAC audio files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20775. |
