| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access
btmtksdio.c and btmtkuart.c cast a received WMT event straight to
struct btmtk_hci_wmt_evt and read its op/flag fields without checking
the event is long enough to contain them, unlike btmtk.c. The
FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc
and reads its 2-byte status field, again without a length check.
Firmware that sends a short or malformed WMT event makes both drivers
read past the end of the received SKB.
Mirror btmtk.c: validate the base WMT header with skb_pull_data()
before touching any of its fields, and when a FUNC_CTRL event turns
out to be the short, header-only form (a plain enable/disable ack
with no status word), decode the result from the header's own flag
byte instead (0 = success, otherwise failure).
Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: check IP header size in cfg80211_classify8021d()
A frame that looks like IP can be transmitted, but be too short, so
the DS field is read incorrectly:
BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180
__ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304
ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538
...
packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:3108
Use skb_header_pointer() like the MPLS case. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short association responses
libipw_handle_assoc_resp() reads the capability, status and aid fields
of the 30-byte association response prefix and then computes the
information element length as
stats->len - sizeof(*frame)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() turns a
frame shorter than the fixed fields into a length near 64 KiB, and the
parser then reads past the receive buffer.
Both the ipw2100 and ipw2200 management receive paths reach this
function having established only that the frame carries the generic
24-byte three-address header.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Reject unregistering netdevs in ib_get_eth_speed
ib_device_get_netdev() intentionally returns a referenced net_device even
when it is unregistering, so matching and cleanup callers can still find
the association. The reference keeps struct net_device allocated, but does
not guarantee that the device remains operational.
ib_get_eth_speed() uses the returned device operationally by invoking its
ethtool callback. Although that call is made under RTNL, the function does
not verify the registration state first. An asynchronous RDMA port query
can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit
have completed.
Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a
device which is being unregistered. Keeping RTNL across the check and the
ethtool operation prevents unregister from starting between them.
Keep the speed fallback and warning under RTNL as well, so the warning can
safely read netdev->name. Drop the netdev reference before releasing RTNL
once all accesses to the device are complete. |
| Use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Insertion of Sensitive Information into Log File vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| Use-after-free in the Networking component. This vulnerability was fixed in Firefox 156, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Use-after-free in the DOM: Streams component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Use-after-free in the SVG component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Dell Container Storage Modules, versions prior to 1.18.0 contain(s) an Use of Insufficiently Random Values vulnerability. An unauthenticated attacker with local access could potentially exploit this vulnerability, leading to Information tampering. |
| js-yaml is a JavaScript YAML parser and dumper. Prior to 3.15.1, 4.3.1, and 5.2.1, YAML11_SCHEMA support for the !!omap tag in src/tag/sequence/omap.ts uses omapTag.addItem() to perform a linear duplicate-key scan on every insertion, causing O(n^2) CPU consumption when yaml.load() parses a crafted ordered-map document. In v3 and v4, !!omap is active and exploitable by default. v5 doesn't use !!omap by default, and the chances of activating it are very low.This issue is fixed in 3.15.1, 4.3.1, and 5.2.1. |
| Dell Container Storage Modules (CSM) versions prior to 1.18.0, contains an Improper Certificate Validation vulnerability in the proxy-server component. An unauthenticated adjacent network attacker could potentially exploit this vulnerability, leading to information exposure of storage backend administrator credentials. |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Improper Neutralization of Special Elements Used in a Template Engine vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc
The low 6 bits of cp_hqd_eop_control store the base-2 logarithm
of the EOP ring size. This was calculated as
ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1
But ffs can in theory return 1 or 0, so this could underflow
(although in practice the ring buffer size cannot be less than 4096).
Change this to
ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4)
using properties of logarithms.
(cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix rmmio iounmap skipped on device removal
amdgpu_pci_remove() calls drm_dev_unplug() before fini_sw(), so
drm_dev_enter() is already false there and the iounmap() guarded by it
is skipped. This .remove path runs on both hot-unplug and plain rmmod,
so the register BAR ioremap mapping leaks one instance per unload.
Unmap rmmio unconditionally (guard only on non-NULL) and drop the now
unused idx.
(cherry picked from commit dd6f86a97260e5207d3329ad03aa89fdad61b1e6) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: refuse to make a monitor active when it has no queue
A monitor interface only gets a TXQ if it's created active, and one can't
be added later. Setting the flag on a down interface is still allowed, so
the driver is handed a monitor with no queue. ath9k dereferences it:
BUG: kernel NULL pointer dereference, address: 0000000000000066
RIP: 0010:ath_tx_node_init+0x49/0x170 [ath9k]
ath9k_add_interface+0x10c/0x140 [ath9k]
drv_add_interface+0x54/0x250 [mac80211]
ieee80211_do_open+0x32f/0x800 [mac80211]
Reached with CAP_NET_ADMIN by "iw dev X set monitor active" followed by
"ip link set X up". RTNL is held, so netlink operations block behind it.
Refuse the flag when there is no queue to give. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid out-of-bounds read for empty PREQ elements
ieee80211_mesh_preq_size_ok() derives the location of the PREQ bottom
fields before checking whether the element contains even the fixed
header. ieee80211_mesh_hwmp_preq_get_bottom() reads the flags byte to
account for the optional Address Extension field. Consequently, an
empty PREQ element causes a one-byte read beyond its declared payload.
Move the helper call after both size checks, so the bottom fields are
only accessed when they are present. |
