| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Micron Crucial MX500 Series Solid State Drives M3CR046 is vulnerable to Buffer Overflow, which can be triggered by sending specially crafted ATA packets from the host to the drive controller. NOTE: The supplier states that this vulnerability was fully remediated in December 2024 and that updated firmware is available through Crucial’s official support page. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
In tcp_bpf_send_verdict() redirection, the eval variable is assigned to
__SK_REDIRECT after the apply_bytes data is sent, if msg has more_data,
sock_put() will be called multiple times.
We should reset the eval variable to __SK_NONE every time more_data
starts.
This causes:
IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110
Modules linked in:
CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1
Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
<TASK>
__tcp_transmit_skb+0xa1b/0xb90
? __alloc_skb+0x8c/0x1a0
? __kmalloc_node_track_caller+0x184/0x320
tcp_write_xmit+0x22a/0x1110
__tcp_push_pending_frames+0x32/0xf0
do_tcp_sendpages+0x62d/0x640
tcp_bpf_push+0xae/0x2c0
tcp_bpf_sendmsg_redir+0x260/0x410
? preempt_count_add+0x70/0xa0
tcp_bpf_send_verdict+0x386/0x4b0
tcp_bpf_sendmsg+0x21b/0x3b0
sock_sendmsg+0x58/0x70
__sys_sendto+0xfa/0x170
? xfd_validate_state+0x1d/0x80
? switch_fpu_return+0x59/0xe0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.
We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak. |
| FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. In versions 17.0.2.36 and above before 17.0.3, the filestore module within the Administrative interface is vulnerable to a post-authentication command injection by an authenticated known user via the testconnection -> check_ssh_connect() function. An attacker can leverage this vulnerability to obtain remote access to the system as an asterisk user. This issue is fixed in version 17.0.3. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). In versions prior to 0.26.6, the Dokploy web interface is vulnerable to Clickjacking attacks due to missing frame-busting headers. This allows attackers to embed Dokploy pages in malicious iframes and trick authenticated users into performing unintended actions. Version 0.26.6 patches the issue. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). In versions prior to 0.26.6, a hardcoded credential in the provided installation script (located at https://dokploy.com/install.sh, line 154) uses a hardcoded password when creating the database container. This means that nearly all Dokploy installations use the same database credentials and could be compromised. Version 0.26.6 contains a patch for the issue. |
| A vulnerability exists in the iHealth command that may allow an authenticated attacker with at least a resource administrator role to bypass tmsh restrictions and gain access to a bash shell. For BIG-IP systems running in Appliance mode, a successful exploit can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When a highly-privileged, authenticated attacker attempts to initialize the rSeries FIPS module using a password with special shell metacharacters, arbitrary system commands may be executed, and the FIPS hardware security module (HSM) may fail to initialize. A successful exploit can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability exists in an undisclosed iControl REST and BIG-IP TMOS Shell (tmsh) command that may allow an authenticated attacker with at least resource administrator role to execute arbitrary system commands with higher privileges. A successful exploit can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| On BIG-IP systems, undisclosed traffic can cause data corruption and unauthorized data modification in protocols which do not have message integrity protection. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Under undisclosed traffic conditions along with conditions beyond the attacker's control, hardware systems with a High-Speed Bridge (HSB) may experience a lockup of the HSB.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| An HTTP/2 implementation flaw allows a denial-of-service (DoS) that uses malformed HTTP/2 control frames in order to break the max concurrent streams limit (HTTP/2 MadeYouReset Attack).
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When running in Appliance mode, a highly privileged authenticated attacker with access to SCP and SFTP may be able to bypass Appliance mode restrictions using undisclosed commands. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When BIG-IP Next Central Manager is running, undisclosed requests to the BIG-IP Next Central Manager API can cause the BIG-IP Next Central Manager Node's Kubernetes service to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When running in Appliance mode, and logged into a highly-privileged role, an authenticated remote command injection vulnerability exists in an undisclosed iControl REST endpoint. A successful exploit can allow the attacker to cross a security boundary.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Under certain conditions, a data leak may occur in the Traffic Management Microkernels (TMMs) of BIG-IP tenants running on VELOS and rSeries platforms. This leak occurs randomly and cannot be deliberately triggered. If it occurs, it may leak up to 64 bytes of non-contiguous randomized bytes. Under rare conditions, this may lead to a TMM restart, affecting availability. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). In versions prior to 0.26.6, a critical command injection vulnerability exists in Dokploy's WebSocket endpoint `/docker-container-terminal`. The `containerId` and `activeWay` parameters are directly interpolated into shell commands without sanitization, allowing authenticated attackers to execute arbitrary commands on the host server. Version 0.26.6 fixes the issue. |
| An issue was discovered in 6.0 before 6.0.2, 5.2 before 5.2.11, and 4.2 before 4.2.28.
`FilteredRelation` is subject to SQL injection in column aliases via control characters, using a suitably crafted dictionary, with dictionary expansion, as the `**kwargs` passed to `QuerySet` methods `annotate()`, `aggregate()`, `extra()`, `values()`, `values_list()`, and `alias()`.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Solomon Kebede for reporting this issue. |
| An issue was discovered in 6.0 before 6.0.2, 5.2 before 5.2.11, and 4.2 before 4.2.28.
`.QuerySet.order_by()` is subject to SQL injection in column aliases containing periods when the same alias is, using a suitably crafted dictionary, with dictionary expansion, used in `FilteredRelation`.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Solomon Kebede for reporting this issue. |
| An issue was discovered in 6.0 before 6.0.2, 5.2 before 5.2.11, and 4.2 before 4.2.28.
Raster lookups on ``RasterField`` (only implemented on PostGIS) allows remote attackers to inject SQL via the band index parameter.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Tarek Nakkouch for reporting this issue. |
