| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, pixel data from adjacent heap memory is rendered to screen, potentially leaking sensitive data to the attacker. This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, in resize_vbar_entry() in libfreerdp/codec/clear.c, vBarEntry->size is updated to vBarEntry->count before the winpr_aligned_recalloc() call. If realloc fails, size is inflated while pixels still points to the old, smaller buffer. On a subsequent call where count <= size (the inflated value), realloc is skipped. The caller then writes count * bpp bytes of attacker-controlled pixel data into the undersized buffer, causing a heap buffer overflow. This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, progressive_decompress_tile_upgrade() detects a mismatch via progressive_rfx_quant_cmp_equal() but only emits WLog_WARN, execution continues. The wrapped value (247) is used as a shift exponent, causing undefined behavior and an approximately 80 billion iteration loop (CPU DoS). This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, there is a heap-buffer-overflow READ vulnerability at 24 bytes before the allocation, in winpr_aligned_offset_recalloc(). This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, a malicious RDP server can crash the FreeRDP client by sending audio data in IMA ADPCM format with an invalid initial step index value (>= 89). The unvalidated step index is read directly from the network and used to index into a 89-entry lookup table, triggering a WINPR_ASSERT() failure and process abort via SIGABRT. This affects any FreeRDP client that has audio redirection (RDPSND) enabled, which is the default configuration. This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, an unvalidated auth_length field read from the network triggers a WINPR_ASSERT() failure in rts_read_auth_verifier_no_checks(), causing any FreeRDP client connecting through a malicious RDP Gateway to crash with SIGABRT. This is a pre-authentication denial of service affecting all FreeRDP clients using RPC-over-HTTP gateway transport. The assertion is active in default release builds (WITH_VERBOSE_WINPR_ASSERT=ON). This issue has been patched in version 3.24.2. |
| A vulnerability was detected in Tenda CH22 1.0.0.1. Impacted is the function formCreateFileName of the file /goform/createFileName. Performing a manipulation of the argument fileNameMit results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. |
| The OpenID Connect (OIDC) authentication configuration in PowerShell
Universal before 2026.1.3 stores the OIDC client secret in cleartext in
the .universal/authentication.ps1 script, which allows an attacker with read access to that file to obtain the OIDC client credentials |
| CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.31.0.0, the application fails to properly sanitize user-controlled input within the Methods Management functionality when creating or managing application methods/pages. Multiple input fields accept attacker-controlled JavaScript payloads that are stored server-side without sanitization or output encoding. These stored values are later rendered directly into administrative interfaces and global navigation components without proper encoding, resulting in Stored DOM-Based Cross-Site Scripting (XSS). This issue has been patched in version 0.31.0.0. |
| CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.31.0.0, the application fails to properly sanitize user-controlled input within group and role management functionality. Multiple input fields (three distinct group-related fields) can be injected with malicious JavaScript payloads, which are then stored server-side. These stored payloads are later rendered unsafely within privileged administrative views without proper output encoding, leading to stored cross-site scripting (XSS) within the role and permission management context. This issue has been patched in version 0.31.0.0. |
| Botan is a C++ cryptography library. Prior to version 3.11.0, during processing of an X.509 certificate path using name constraints which restrict the set of allowable DNS names, if no subject alternative name is defined in the end-entity certificate Botan would check that the CN was allowed by the DNS name constraints, even though this check is technically not required by RFC 5280. However this check failed to account for the possibility of a mixed-case CN. Thus a certificate with CN=Sub.EVIL.COM and no subject alternative name would bypasses an excludedSubtrees constraint for evil.com because the comparison is case-sensitive. This issue has been patched in version 3.11.0. |
| Botan is a C++ cryptography library. From version 3.0.0 to before version 3.11.0, during X509 path validation, OCSP responses were checked for an appropriate status code, but critically omitted verifying the signature of the OCSP response itself. This issue has been patched in version 3.11.0. |
| Botan is a C++ cryptography library. From version 2.3.0 to before version 3.11.0, during SM2 decryption, the code that checked the authentication code value (C3) failed to check that the encoded value was of the expected length prior to comparison. An invalid ciphertext can cause a heap over-read of up to 31 bytes, resulting in a crash or potentially other undefined behavior. This issue has been patched in version 3.11.0. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In NanoMQ version 0.24.6, after enabling auth.http_auth (HTTP authentication), when a client connects to the broker using MQTT CONNECT without providing username/password, and the configuration params uses the placeholders %u / %P (e.g., username="%u", password="%P"), the HTTP request construction phase enters auth_http.c:set_data(). This results in calling strlen() on a NULL pointer, causing a SIGSEGV crash. This crash can be triggered remotely, resulting in a denial of service. This issue has been patched in version 0.24.7. |
| OpenOlat is an open source web-based e-learning platform for teaching, learning, assessment and communication. From version 10.5.4 to before version 20.2.5, OpenOLAT's OpenID Connect implicit flow implementation does not verify JWT signatures. The JSONWebToken.parse() method silently discards the signature segment of the compact JWT (header.payload.signature), and the getAccessToken() methods in both OpenIdConnectApi and OpenIdConnectFullConfigurableApi only validate claim-level fields (issuer, audience, state, nonce) without any cryptographic signature verification against the Identity Provider's JWKS endpoint. This issue has been patched in version 20.2.5. |
| DSAI-Cline's command auto-approval module contains a critical OS command injection vulnerability that renders its whitelist security mechanism completely ineffective. The system relies on string-based parsing to validate commands; while it intercepts dangerous operators such as ;, &&, ||, |, and command substitution patterns, it fails to account for raw newline characters embedded within the input. An attacker can construct a payload by embedding a literal newline between a whitelisted command and malicious code (e.g., git log malicious_command), forcing DSAI-Cline to misidentify it as a safe operation and automatically approve it. The underlying PowerShell interpreter treats the newline as a command separator, executing both commands sequentially, resulting in Remote Code Execution without any user interaction. |
| In its design for automatic terminal command execution, HAI Build Code Generator offers two options: Execute safe commands and Execute all commands. The description for the former states that commands determined by the model to be safe will be automatically executed, whereas if the model judges a command to be potentially destructive, it still requires user approval. However, this design is highly susceptible to prompt injection attacks. An attacker can employ a generic template to wrap any malicious command and mislead the model into misclassifying it as a 'safe' command, thereby bypassing the user approval requirement and resulting in arbitrary command execution. |
| In its design for automatic terminal command execution, SakaDev offers two options: Execute safe commands and execute all commands. The description for the former states that commands determined by the model to be safe will be automatically executed, whereas if the model judges a command to be potentially destructive, it still requires user approval. However, this design is highly susceptible to prompt injection attacks. An attacker can employ a generic template to wrap any malicious command and mislead the model into misclassifying it as a 'safe' command, thereby bypassing the user approval requirement and resulting in arbitrary command execution. |
| OpenOlat is an open source web-based e-learning platform for teaching, learning, assessment and communication. Prior to versions 19.1.31, 20.1.18, and 20.2.5, an authenticated user with the Author role can inject Velocity directives into a reminder email template. When the reminder is processed (either triggered manually or via the daily cron job), the injected directives are evaluated server-side. By chaining Velocity's #set directive with Java reflection, an attacker can instantiate arbitrary Java classes such as java.lang.ProcessBuilder and execute operating system commands with the privileges of the Tomcat process (typically root in containerized deployments). This issue has been patched in versions 19.1.31, 20.1.18, and 20.2.5. |
| CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.31.0.0, the application fails to properly sanitize user-controlled input within System Settings – Mail Settings. Several configuration fields, including Mail Server, Mail Port, Email Address, Email Password, Mail Protocol, and TLS settings, accept attacker-controlled input that is stored server-side and later rendered without proper output encoding. This issue has been patched in version 0.31.0.0. |
