| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon()
rtw_core_enable_beacon() reads 4 bytes from an address that is not a
multiple of 4. This results in a crash on some systems.
Do 1 byte reads/writes instead.
Unable to handle kernel paging request at virtual address ffff8000827e0522
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
Data abort info:
ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000
[ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13
Internal error: Oops: 0000000096000021 [#1] SMP
Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...]
CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY
Tainted: [W]=WARN
Hardware name: FriendlyElec NanoPC-T6 LTS (DT)
Workqueue: phy0 rtw_c2h_work [rtw88_core]
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : rtw_pci_read32+0x18/0x40 [rtw88_pci]
lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core]
sp : ffff800080cc3ca0
x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828
x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00
x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001
x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522
Call trace:
rtw_pci_read32+0x18/0x40 [rtw88_pci] (P)
rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core]
rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core]
rtw_c2h_work+0x50/0x98 [rtw88_core]
process_one_work+0x178/0x3f8
worker_thread+0x208/0x418
kthread+0x120/0x220
ret_from_fork+0x10/0x20
Code: d28fe202 8b020000 f9524400 8b214000 (b9400000)
---[ end trace 0000000000000000 ]--- |
| UTT HiPER 810 / nv810v4 router firmware v1.5.0-140603 was discovered to contain insecure default credentials for the telnet service, possibly allowing a remote attacker to gain root access via a crafted script. |
| ArcGIS Server versions 11.5 and earlier on Windows and Linux do not sufficiently validate uploaded files, enabling a remote unauthenticated attacker to upload arbitrary files to the server’s designated upload directories.
However, the server’s architecture enforces controls that restrict uploaded files to non‑executable storage locations and prevent modification or replacement of existing application components or system configurations. Uploaded files cannot be executed, leveraged to escalate privileges, or used to access sensitive data.
Because the issue does not enable execution, service disruption, unauthorized access, or integrity compromise, its impact on confidentiality, integrity, and availability is low. No race conditions, secret values, or man‑in‑the‑middle conditions are required for exploitation. |
| ArcGIS Server versions 11.5 and earlier on Windows and Linux do not sufficiently validate uploaded files, enabling a remote unauthenticated attacker to upload arbitrary files to the server’s designated upload directories.
However, the server’s architecture enforces controls that restrict uploaded files to non‑executable storage locations and prevent modification or replacement of existing application components or system configurations. Uploaded files cannot be executed, leveraged to escalate privileges, or used to access sensitive data.
Because the issue does not enable execution, service disruption, unauthorized access, or integrity compromise, its impact on confidentiality, integrity, and availability is low. No race conditions, secret values, or man‑in‑the‑middle conditions are required for exploitation. |
| An arbitrary code execution vulnerability exists in the Code Stream directive functionality of OpenCFD OpenFOAM 2506. A specially crafted OpenFOAM simulation file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| Deserialization of Untrusted Data vulnerability in OpenText™ Directory Services allows Object Injection. The vulnerability could lead to remote code execution, denial of service, or
privilege escalation.
This issue affects Directory Services: from 10.5 through 26.1. |
| In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can modify the plaintext Extra Count field of a confidential GSS krb5 wrap token, causing the unwrapped token to appear truncated to the application. |
| node-tar is a Tar for Node.js. The node-tar library (<= 7.5.2) fails to sanitize the linkpath of Link (hardlink) and SymbolicLink entries when preservePaths is false (the default secure behavior). This allows malicious archives to bypass the extraction root restriction, leading to Arbitrary File Overwrite via hardlinks and Symlink Poisoning via absolute symlink targets. This vulnerability is fixed in 7.5.3. |
| Gradle is a build automation tool, and its native-platform tool provides Java bindings for native APIs. When resolving dependencies in versions before 9.3.0, some exceptions were not treated as fatal errors and would not cause a repository to be disabled. If a build encountered one of these exceptions, Gradle would continue to the next repository in the list and potentially resolve dependencies from a different repository. If a Gradle build used an unresolvable host name, Gradle would continue to work as long as all dependencies could be resolved from another repository. An unresolvable host name could be caused by allowing a repository's domain name registration to lapse or typo-ing the real domain name. This behavior could allow an attacker to register a service under the host name used by the build and serve malicious artifacts. The attack requires the repository to be listed before others in the build configuration. Gradle has introduced a change in behavior in Gradle 9.3.0 to stop searching other repositories when encountering these errors. |
| Gradle is a build automation tool, and its native-platform tool provides Java bindings for native APIs. When resolving dependencies in versions before 9.3.0, some exceptions were not treated as fatal errors and would not cause a repository to be disabled. If a build encountered one of these exceptions, Gradle would continue to the next repository in the list and potentially resolve dependencies from a different repository. An exception like NoHttpResponseException can indicate transient errors. If the errors persist after a maximum number of retries, Gradle would continue to the next repository. This behavior could allow an attacker to disrupt the service of a repository and leverage another repository to serve malicious artifacts. This attack requires the attacker to have control over a repository after the disrupted repository. Gradle has introduced a change in behavior in Gradle 9.3.0 to stop searching other repositories when encountering these errors. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t
he fields of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage are tampered with — specifically by ta
mpering with the the `vecsize` value read by `readOctetVector` — a 32-bit integer overflow can occur, causing `std::vector
::resize` to request an attacker-controlled size and quickly trigger OOM and remote process termination. Versions 3.4.1, 3
.3.1, and 2.6.11 patch the issue. |
| Craft Commerce is an ecommerce platform for Craft CMS. In versions from 4.0.0-RC1 to 4.10.0 and from 5.0.0 to 5.5.1, a stored XSS vulnerability in Craft Commerce allows attackers to execute malicious JavaScript in an administrator’s browser. This occurs because the Shipping Zone (Name & Description) fields in the Store Management section are not properly sanitized before being displayed in the admin panel. This issue has been patched in versions 4.10.1 and 5.5.2. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes a heap buffer overflow, resulting in remote termination of Fast-DDS. If the fields
of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage — specifically by tampering with the `str_size`
value read by `readString` (called from `readBinaryProperty`) — are modified, a 32-bit integer overflow can occur, causing
`std::vector::resize` to use an attacker-controlled size and quickly trigger heap buffer overflow and remote process term
ination. Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes a heap buffer overflow, resulting in remote termination of Fast-DDS. If the fields
of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage are tampered with — specially `readOctetVector`
reads an unchecked `vecsize` that is propagated unchanged into `readData` as the `length` parameter — the attacker-contro
lled `vecsize` can trigger a 32-bit integer overflow during the `length` calculation. That overflow can cause large alloca
tion attempt that quickly leads to OOM, enabling a remotely-triggerable denial-of-service and remote process termination.
Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). ParticipantGenericMessage is the DDS Security control-message container that carries not only the handshake but also on
going security-control traffic after the handshake, such as crypto-token exchange, rekeying, re-authentication, and token
delivery for newly appearing endpoints. On receive, the CDR parser is invoked first and deserializes the `message_data` (i
.e., the `DataHolderSeq`) via the `readParticipantGenericMessage → readDataHolderSeq` path. The `DataHolderSeq` is parsed
sequentially: a sequence count (`uint32`), and for each DataHolder the `class_id` string (e.g. `DDS:Auth:PKI-DH:1.0+Req`),
string properties (a sequence of key/value pairs), and binary properties (a name plus an octet-vector). The parser operat
es at a stateless level and does not know higher-layer state (for example, whether the handshake has already completed), s
o it fully unfolds the structure before distinguishing legitimate from malformed traffic. Because RTPS permits duplicates,
delays, and retransmissions, a receiver must perform at least minimal structural parsing to check identity and sequence n
umbers before discarding or processing a message; the current implementation, however, does not "peek" only at a minimal
header and instead parses the entire `DataHolderSeq`. As a result, prior to versions 3.4.1, 3.3.1, and 2.6.11, this parsi
ng behavior can trigger an out-of-memory condition and remotely terminate the process. Versions 3.4.1, 3.3.1, and 2.6.11 p
atch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a heap buffer overflow exists in the Fast-DDS DATA_FRAG receive path. An un
authenticated sender can transmit a single malformed RTPS DATA_FRAG packet where `fragmentSize` and `sampleSize` are craft
ed to violate internal assumptions. Due to a 4-byte alignment step during fragment metadata initialization, the code write
s past the end of the allocated payload buffer, causing immediate crash (DoS) and potentially enabling memory corruption (
RCE risk). Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| esm.sh is a no-build content delivery network (CDN) for web development. Prior to Go pseeudoversion 0.0.0-20260116051925-c62ab83c589e, the software has a path traversal vulnerability due to an incomplete fix. `path.Clean` normalizes a path but does not prevent absolute paths in a malicious tar file. Commit https://github.com/esm-dev/esm.sh/commit/9d77b88c320733ff6689d938d85d246a3af9af16, corresponding to pseudoversion 0.0.0-20260116051925-c62ab83c589e, fixes this issue. |
| Foxit PDF Editor Cloud (pdfonline) contains a stored cross-site scripting vulnerability in the Create New Layer feature. Unsanitized user input is embedded into the HTML output, allowing arbitrary JavaScript execution when the layer is referenced.
This issue affects pdfonline.foxit.com: before 2026‑02‑03. |
| Foxit PDF Editor Cloud (pdfonline) contains a stored cross-site scripting vulnerability in the file upload feature. A malicious username is embedded into the upload file list without proper escaping, allowing arbitrary JavaScript execution when the list is displayed.
This issue affects pdfonline.foxit.com: before 2026‑02‑03. |
| Local privilege escalation vulnerability via insecure temporary batch file execution in ESET Management Agent |
