| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work()
When the mt7915 pci chip is detaching, the mt7915_crash_data is
released in mt7915_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7915_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7915_pci_remove() | mt7915_sys_recovery_set()
mt7915_unregister_device() | mt7915_reset()
mt7915_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7915_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7915_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak destroying device
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues. |
| Faraday is an HTTP client library abstraction layer that provides a common interface over many adapters. From 1.0.0 until 1.10.6 and 2.14.3, Faraday::NestedParamsEncoder, the default nested query parameter encoder/decoder in Faraday, decodes nested query strings without enforcing a maximum nesting depth. A crafted query string causes Faraday to build a deeply nested Ruby Hash structure. The internal dehash routine then recursively walks this attacker-controlled structure without a depth limit. At sufficient depth, Ruby raises an uncaught SystemStackError (stack level too deep), crashing the calling thread or worker. This can lead to denial of service in applications that pass attacker-controlled query strings to Faraday's nested query parsing or URL-building paths. This vulnerability is fixed in 1.10.6 and 2.14.3. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11, Rocket.Chat's SAML service provider implementation silently skips both SAML Response and Assertion signature validation when the configured IdP certificate field is empty. The verifySignatures routine performs an early return when serviceProviderOptions.cert is falsy, which is the default state of the setting. Because provider registration only gates on the SAML "enabled" toggle and not on the presence of a certificate, an administrator who enables SAML without pasting an IdP certificate obtains a fully wired, publicly reachable SAML login endpoint that accepts unsigned or attacker-supplied assertions. This is a default-configuration authentication-bypass class: the fail-open branch is reached with no misconfiguration beyond leaving a field at its shipped default. This vulnerability is fixed in 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11, an unauthenticated network attacker obtains a valid Rocket.Chat OAuth access token for an arbitrary user by sending a single HTTP POST with MongoDB query operators to /oauth/token. The Rocket.Chat OAuth2 server does not validate that grant parameters are strings before forwarding them to findOne({...}) against the oauth_apps and oauth_access_tokens collections, so an attacker substitutes {"$ne": null} for client_id, client_secret, and refresh_token and receives a freshly minted {access_token, refresh_token} pair bound to whichever user's refresh token Mongo returned first. The resulting access token is a first-class bearer credential against the full /api/v1/* surface as that user. By iterating with $nin / $regex operators the attacker walks the entire oauth_access_tokens collection, collecting one fresh access token per user per request. If any matched token belongs to an admin, the stolen bearer gives full admin API access (including Apps-Engine app installation, i.e. server-side code execution). No account, credentials, userId, or prior interaction with the instance are required. This vulnerability is fixed in 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11, Rocket.Chat's CAS login handler forwards the client-supplied options.cas.credentialToken value straight into a MongoDB findOne({_id: ...}) query without any runtime type check. TypeScript's string parameter annotation is erased at runtime, so an unauthenticated attacker can substitute a MongoDB query operator ({"$gt": ""}, {"$ne": null}, etc.) for what the server expects to be an opaque ticket string. The injected operator matches the first unexpired document in the credential_tokens collection, bypassing the CAS ticket check entirely. When any legitimate CAS or SAML SSO login is in flight, the attacker's next DDP login call matches the same credential-token row via the NoSQL operator and is issued a full Meteor auth token (userId + token) bound to the victim. The token is immediately usable against the complete REST and DDP surface as that user. If the victim is an administrator, this escalates to full instance compromise via Apps-Engine app install. This vulnerability is fixed in 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11, Rocket.Chat's sendFileMessage DDP method passes the entire attacker-supplied file object into Uploads.updateFileComplete, which merges it directly into a MongoDB $set update via Object.assign. There is no allow-list of writable fields. An attacker can therefore rewrite any column on their own upload record, notably store and the store-specific path fields. This vulnerability is fixed in 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11, Rocket.Chat's SAML integration does not verify the signature on inbound LogoutRequest messages. An unauthenticated remote attacker who knows a target user's SAML NameID - which major identity providers (Okta, Google Workspace, Microsoft Entra ID, JumpCloud) expose as the user's email address - can craft a valid-looking unsigned LogoutRequest and submit it to the SP logout endpoint. The server processes it as legitimate, immediately destroying the victim's session. Because the attack requires no authentication and no interaction from the victim, it can be repeated in a loop against individual users or scripted across many accounts, effectively rendering the Rocket.Chat instance unusable for SAML-authenticated users. This vulnerability is fixed in 8.5.0, 8.4.1, 8.3.3, 8.2.3, 8.1.4, 8.0.5, 7.13.7, and 7.10.11. |
| AutoGPT is a workflow automation platform for creating, deploying, and managing continuous artificial intelligence agents. In versions prior to 0.6.52, the Fill Text Template block is vulnerable to a Denial of Service (DoS) attack. While the backend implements a SandboxedEnvironment to prevent unauthorized attribute access (e.g., blocking __class__), it fails to limit the computational complexity or execution time of the expressions. An attacker can input computationally expensive Python/Jinja2 expressions that consume the server's CPU and memory, leading to a complete system hang or crash. In multi-tenant or self-hosted environments, this results in a complete service outage and "noisy neighbor" effects that require manual administrative intervention to recover. This issue has been fixed in version 0.6.52. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.0, the ImageElement component in packages/gazzodown renders user-controlled src values directly into <a href> and <img src> attributes without protocol sanitization. Unlike the analogous LinkSpan component — which uses sanitizeUrl to block javascript:, data:, and vbscript: protocols — ImageElement passes the raw URL through unchanged. An authenticated user can post a markdown image with a javascript: URL that, if clicked on an older browser, would execute arbitrary JavaScript in the viewer's session. This vulnerability is fixed in 8.5.0. |
| motionEye (mEye) is an online interface for motion software, a video surveillance program with motion detection. Versions prior to 0.44.0 create the configuration file /etc/motioneye/motion.conf with 644 permissions (-rw-r--r--), making it readable by any local user on the system. This file contains sensitive data including the admin password hash, which can be leveraged by other vulnerabilities to escalate privileges. Additionally, per-camera configuration files (camera-*.conf) are also created with the same 644 permissions, potentially exposing camera-specific credentials and settings. The exposed SHA1 admin password hash can be cracked offline to recover the plaintext password, used directly to forge authenticated admin API requests via the signature authentication weakness (GHSA-45h7-499j-7ww3), and chained with the OS command injection flaw (CVE-2025-60787) to escalate a local unprivileged user to the Motion daemon user (often root), enabling full system compromise. This issue has been fixed in version 0.44.0. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Do not allow deleting local storage in NMI
Currently, local storage may deadlock when deferring freeing selem or
local storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace()
in NMI or reentrant. Since deleting selem in NMI is an unlikely use
case, partially mitigate it by returning error when calling from
bpf_xxx_storage_delete() helpers in NMI. Note that, it is still possible
to deadlock through reentrant. A full mitigation requires returning
error when irqs_disabled() is true, which, however is too heavy-handed
for bpf_xxx_storage_delete().
The long-term solution requires _nolock versions of call_rcu. Another
possible solution is to defer the free through irq_work [0], but it
would grow the size of selem, which is non-ideal.
The check is only needed in bpf_selem_unlink(), which is used by helpers
and syscalls. bpf_selem_unlink_nofail() is fine as it is called during
map and owner tear down that never run in NMI or reentrant.
[0] https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: don't kill URBs in interrupt context
Serialization for the TX path was enforced by calling
usb_kill_urb()/usb_kill_anchored_urbs(), to prevent transmission before
a previous URB was completed. usb_tx_block() can be called from
interrupt context (e.g. in the HCD giveback path), so we can't always
use it to kill in-flight URBs.
Prevent sleeping during interrupt context by checking the tx_submitted
anchor for existing URBs. We now return -EBUSY, to indicate there's
a pending request. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy
powerpc uses pt_frag_refcount as a reference counter for tracking it's
pte and pmd page table fragments. For PTE table, in case of Hash with
64K pagesize, we have 16 fragments of 4K size in one 64K page.
Patch series [1] "mm: free retracted page table by RCU"
added pte_free_defer() to defer the freeing of PTE tables when
retract_page_tables() is called for madvise MADV_COLLAPSE on shmem
range.
[1]: https://lore.kernel.org/all/7cd843a9-aa80-14f-5eb2-33427363c20@google.com/
pte_free_defer() sets the active flag on the corresponding fragment's
folio & calls pte_fragment_free(), which reduces the pt_frag_refcount.
When pt_frag_refcount reaches 0 (no active fragment using the folio), it
checks if the folio active flag is set, if set, it calls call_rcu to
free the folio, it the active flag is unset then it calls pte_free_now().
Now, this can lead to following problem in a corner case...
[ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62
[ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62
[ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff)
[ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000
[ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000
[ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
[ 265.362572][ T183] Modules linked in:
[ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY
[ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
[ 265.364908][ T183] Call Trace:
[ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable)
[ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8
[ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08
[ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310
[ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218
[ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820
[ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300
[ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508
[ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148
[ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178
[ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0
[ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
The bad page state error occurs when such a folio gets freed (with
active flag set), from do_exit() path in parallel.
... this can happen when the pte fragment was allocated from this folio,
but when all the fragments get freed, the pte_frag_refcount still had some
unused fragments. Now, if this process exits, with such folio as it's cached
pte_frag in mm->context, then during pte_frag_destroy(), we simply call
pagetable_dtor() and pagetable_free(), meaning it doesn't clear the
active flag. This, can lead to the above bug. Since we are anyway in
do_exit() path, then if the refcount is 0, then I guess it should be
ok to simply clear the folio active flag before calling pagetable_dtor()
& pagetable_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Zero-extend bpf prog return values and kfunc arguments
s390x ABI requires callers to zero-extend unsigned arguments and
sign-extend signed arguments, and callees to zero-extend unsigned
return values and sign-extend signed return values.
s390 BPF JIT currently implements only sign extension. Fix this
omission and implement zero extension too. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ap: use generic driver_override infrastructure
When the AP masks are updated via apmask_store() or aqmask_store(),
ap_bus_revise_bindings() is called after ap_attr_mutex has been
released.
This calls __ap_revise_reserved(), which accesses the driver_override
field without holding any lock, racing against a concurrent
driver_override_store() that may free the old string, resulting in a
potential UAF.
Fix this by using the driver-core driver_override infrastructure, which
protects all accesses with an internal spinlock.
Note that unlike most other buses, the AP bus does not check
driver_override in its match() callback; the override is checked in
ap_device_probe() and __ap_revise_reserved() instead.
Also note that we do not enable the driver_override feature of struct
bus_type, as AP - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Additionally, AP has a custom counter that is modified in the
corresponding custom driver_override_store(). |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
md: wake raid456 reshape waiters before suspend
During raid456 reshape, direct IO across the reshape position can sleep
in raid5_make_request() waiting for reshape progress while still
holding an active_io reference. If userspace then freezes reshape and
writes md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_io
and waits for all in-flight IO to drain.
This can deadlock: the IO needs reshape progress to continue, but the
reshape thread is already frozen, so the active_io reference is never
dropped and suspend never completes.
raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Do
the same for normal md suspend when reshape is already interrupted, so
waiting raid456 IO can abort, drop its reference, and let suspend
finish.
The mdadm test tests/25raid456-reshape-deadlock reproduces the hang. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/mbcache: cancel shrink work before destroying the cache
mb_cache_destroy() calls shrinker_free() and then frees all cache
entries and the cache itself, but it does not cancel the pending
c_shrink_work work item first.
If mb_cache_entry_create() schedules c_shrink_work via schedule_work()
and the work item is still pending or running when mb_cache_destroy()
runs, mb_cache_shrink_worker() will access the cache after its memory
has been freed, causing a use-after-free.
This is only reachable by a privileged user (root or CAP_SYS_ADMIN)
who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem.
Cancel the work item with cancel_work_sync() before calling
shrinker_free(), ensuring the worker has finished and will not be
rescheduled before the cache is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START
omfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE),
but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440).
Later, omfs_make_empty() uses
sbi->s_sys_blocksize - OMFS_DIR_START
as the length argument to memset(). Since s_sys_blocksize is u32,
a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causes
an unsigned underflow there, wrapping to a value near 2^32. That drives
a ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernel
memory far beyond the backing block buffer.
Add the corresponding lower-bound check alongside the existing upper-bound
check in omfs_fill_super(), so that malformed images are rejected during
superblock validation before any filesystem data is processed. |
