| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: crypto: Use the correct destructor kfunc type
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the target
function. I ran into the following type mismatch when running BPF
self-tests:
CFI failure at bpf_obj_free_fields+0x190/0x238 (target:
bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc)
Internal error: Oops - CFI: 00000000f2008228 [#1] SMP
...
As bpf_crypto_ctx_release() is also used in BPF programs and using
a void pointer as the argument would make the verifier unhappy, add
a simple stub function with the correct type and register it as the
destructor kfunc instead. |
| In the Linux kernel, the following vulnerability has been resolved:
md raid: fix hang when stopping arrays with metadata through dm-raid
When using device-mapper's dm-raid target, stopping a RAID array can cause
the system to hang under specific conditions.
This occurs when:
- A dm-raid managed device tree is suspended from top to bottom
(the top-level RAID device is suspended first, followed by its
underlying metadata and data devices)
- The top-level RAID device is then removed
Removing the top-level device triggers a hang in the following sequence:
the dm-raid destructor calls md_stop(), which tries to flush the
write-intent bitmap by writing to the metadata sub-devices. However, these
devices are already suspended, making them unable to complete the write-intent
operations and causing an indefinite block.
Fix:
- Prevent bitmap flushing when md_stop() is called from dm-raid
destructor context
and avoid a quiescing/unquescing cycle which could also cause I/O
- Still allow write-intent bitmap flushing when called from dm-raid
suspend context
This ensures that RAID array teardown can complete successfully even when the
underlying devices are in a suspended state.
This second patch uses md_is_rdwr() to distinguish between suspend and
destructor paths as elaborated on above. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ptp: don't WARN when controlling PF is unavailable
In VFIO passthrough setups, it is possible to pass through only a PF
which doesn't own the source timer. In that case the PTP controlling PF
(adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp()
returns NULL and triggers WARN_ON() in ice_ptp_setup_pf().
Since this is an expected behavior in that configuration, replace
WARN_ON() with an informational message and return -EOPNOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close()
opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being
accessed after rcu_read_unlock() has been called. This creates a
race condition where the memory could be freed by a concurrent
writer between the unlock and the subsequent pointer dereferences
(opinfo->is_lease, etc.), leading to a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-md5: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-ao: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie
The current code checks 'i + 5 < in_len' at the end of the if statement.
However, it accesses 'in_ie[i + 5]' before that check, which can lead
to an out-of-bounds read. Move the length check to the beginning of the
conditional to ensure the index is within bounds before accessing the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc, perf: Check that current->mm is alive before getting user callchain
It may happen that mm is already released, which leads to kernel panic.
This adds the NULL check for current->mm, similarly to
commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain").
I was getting this panic when running a profiling BPF program
(profile.py from bcc-tools):
[26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0)
[26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588
[26215.051952] Faulting instruction address: 0xc00000000020fac0
[26215.051957] Oops: Kernel access of bad area, sig: 11 [#1]
[...]
[26215.052049] Call Trace:
[26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable)
[26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30
[26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360
[26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0
[26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274
[...]
In addition, move storing the top-level stack entry to generic
perf_callchain_user to make sure the top-evel entry is always captured,
even if current->mm is NULL.
[Maddy: fixed message to avoid checkpatch format style error] |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix memory leaks in ceph_mdsc_build_path()
Add __putname() calls to error code paths that did not free the "path"
pointer obtained by __getname(). If ownership of this pointer is not
passed to the caller via path_info.path, the function must free it
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tests: shmem: Hold reservation lock around purge
Acquire and release the GEM object's reservation lock around calls
to the object's purge operation. The tests use
drm_gem_shmem_purge_locked(), which led to errors such as show below.
[ 58.709128] WARNING: CPU: 1 PID: 1354 at drivers/gpu/drm/drm_gem_shmem_helper.c:515 drm_gem_shmem_purge_locked+0x51c/0x740
Only export the new helper drm_gem_shmem_purge() for Kunit tests.
This is not an interface for regular drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()
In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE
device and then reassigned an ISA device:
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...);
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...);
If the first lookup succeeds but the second fails, dev becomes NULL. This
leads to a potential null-pointer dereference when dev_dbg() is called:
if (errata.piix4.bmisx)
dev_dbg(&dev->dev, ...);
To prevent this, use two temporary pointers and retrieve each device
independently, avoiding overwriting dev with a possible NULL value.
[ rjw: Subject adjustment, added an empty code line ] |
| In the Linux kernel, the following vulnerability has been resolved:
dm: remove fake timeout to avoid leak request
Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of
blk_mq_complete_request"), drivers are responsible for calling
blk_should_fake_timeout() at appropriate code paths and opportunities.
However, the dm driver does not implement its own timeout handler and
relies on the timeout handling of its slave devices.
If an io-timeout-fail error is injected to a dm device, the request
will be leaked and never completed, causing tasks to hang indefinitely.
Reproduce:
1. prepare dm which has iscsi slave device
2. inject io-timeout-fail to dm
echo 1 >/sys/class/block/dm-0/io-timeout-fail
echo 100 >/sys/kernel/debug/fail_io_timeout/probability
echo 10 >/sys/kernel/debug/fail_io_timeout/times
3. read/write dm
4. iscsiadm -m node -u
Result: hang task like below
[ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds.
[ 862.244133] Tainted: G E 6.19.0-rc1+ #51
[ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000
[ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi]
[ 862.245264] Call Trace:
[ 862.245587] <TASK>
[ 862.245814] __schedule+0x810/0x15c0
[ 862.246557] schedule+0x69/0x180
[ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120
[ 862.247688] elevator_change+0x16d/0x460
[ 862.247893] elevator_set_none+0x87/0xf0
[ 862.248798] blk_unregister_queue+0x12e/0x2a0
[ 862.248995] __del_gendisk+0x231/0x7e0
[ 862.250143] del_gendisk+0x12f/0x1d0
[ 862.250339] sd_remove+0x85/0x130 [sd_mod]
[ 862.250650] device_release_driver_internal+0x36d/0x530
[ 862.250849] bus_remove_device+0x1dd/0x3f0
[ 862.251042] device_del+0x38a/0x930
[ 862.252095] __scsi_remove_device+0x293/0x360
[ 862.252291] scsi_remove_target+0x486/0x760
[ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi]
[ 862.252886] process_one_work+0x633/0xe50
[ 862.253101] worker_thread+0x6df/0xf10
[ 862.253647] kthread+0x36d/0x720
[ 862.254533] ret_from_fork+0x2a6/0x470
[ 862.255852] ret_from_fork_asm+0x1a/0x30
[ 862.256037] </TASK>
Remove the blk_should_fake_timeout() check from dm, as dm has no
native timeout handling and should not attempt to fake timeouts. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
Avoid division by zero when sampling frequency is unspecified. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer()
Call rcu_read_lock() before exiting the loop in
try_release_subpage_extent_buffer() because there is a rcu_read_unlock()
call past the loop.
This has been detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on file creation due to name hash collision
If we attempt to create several files with names that result in the same
hash, we have to pack them in same dir item and that has a limit inherent
to the leaf size. However if we reach that limit, we trigger a transaction
abort and turns the filesystem into RO mode. This allows for a malicious
user to disrupt a system, without the need to have administration
privileges/capabilities.
Reproducer:
$ cat exploit-hash-collisions.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster and require fewer file
# names that result in hash collision.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# List of names that result in the same crc32c hash for btrfs.
declare -a names=(
'foobar'
'%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC'
'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z'
'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4'
'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:'
'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO'
'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us'
'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY'
'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO'
'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU'
'Ono7avN5GjC:_6dBJ_'
'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am'
'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k'
'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2'
'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd'
'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm'
'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ'
'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky'
'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS'
'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz'
'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu'
'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN'
'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4='
'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn'
'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C'
'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW'
'8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc'
'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort when snapshotting received subvolumes
Currently a user can trigger a transaction abort by snapshotting a
previously received snapshot a bunch of times until we reach a
BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we
can store in a leaf). This is very likely not common in practice, but
if it happens, it turns the filesystem into RO mode. The snapshot, send
and set_received_subvol and subvol_setflags (used by receive) don't
require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user
could use this to turn a filesystem into RO mode and disrupt a system.
Reproducer script:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# Create a subvolume and set it to RO so that it can be used for send.
btrfs subvolume create $MNT/sv
touch $MNT/sv/foo
btrfs property set $MNT/sv ro true
# Send and receive the subvolume into snaps/sv.
mkdir $MNT/snaps
btrfs send $MNT/sv | btrfs receive $MNT/snaps
# Now snapshot the received subvolume, which has a received_uuid, a
# lot of times to trigger the leaf overflow.
total=500
for ((i = 1; i <= $total; i++)); do
echo -ne "\rCreating snapshot $i/$total"
btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null
done
echo
umount $MNT
When running the test:
$ ./test.sh
(...)
Create subvolume '/mnt/sdi/sv'
At subvol /mnt/sdi/sv
At subvol sv
Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type
Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system
And in dmesg/syslog:
$ dmesg
(...)
[251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252!
[251067.629212] ------------[ cut here ]------------
[251067.630033] BTRFS: Transaction aborted (error -75)
[251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235
[251067.632851] Modules linked in: btrfs dm_zero (...)
[251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[251067.646165] Tainted: [W]=WARN
[251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs]
[251067.649984] Code: f0 48 0f (...)
[251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292
[251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3
[251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750
[251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820
[251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0
[251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5
[251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000
[251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0
[251067.661972] Call Trace:
[251067.662292] <TASK>
[251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs]
[251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs]
[251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs]
[251067.665238] ? _raw_spin_unlock+0x15/0x30
[251067.665837] ? record_root_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix in-place encryption corruption in SMB2_write()
SMB2_write() places write payload in iov[1..n] as part of rq_iov.
smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message()
encrypts iov[1] in-place, replacing the original plaintext with
ciphertext. On a replayable error, the retry sends the same iov[1]
which now contains ciphertext instead of the original data,
resulting in corruption.
The corruption is most likely to be observed when connections are
unstable, as reconnects trigger write retries that re-send the
already-encrypted data.
This affects SFU mknod, MF symlinks, etc. On kernels before
6.10 (prior to the netfs conversion), sync writes also used
this path and were similarly affected. The async write path
wasn't unaffected as it uses rq_iter which gets deep-copied.
Fix by moving the write payload into rq_iter via iov_iter_kvec(),
so smb3_init_transform_rq() deep-copies it before encryption. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix undersized l_iclog_roundoff values
If the superblock doesn't list a log stripe unit, we set the incore log
roundoff value to 512. This leads to corrupt logs and unmountable
filesystems in generic/617 on a disk with 4k physical sectors...
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197.
XFS (sda1): failed to locate log tail
XFS (sda1): log mount/recovery failed: error -74
XFS (sda1): log mount failed
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Ending clean mount
...on the current xfsprogs for-next which has a broken mkfs. xfs_info
shows this...
meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=1 metadir=1
data = bsize=4096 blocks=2579968, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=4096 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=268435456 extents
= zoned=0 start=0 reserved=0
...observe that the log section has sectsz=4096 sunit=0, which means
that the roundoff factor is 512, not 4096 as you'd expect. We should
fix mkfs not to generate broken filesystems, but anyone can fuzz the
ondisk superblock so we should be more cautious. I think the inadequate
logic predates commit a6a65fef5ef8d0, but that's clearly going to
require a different backport. |
