| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in GnuTLS. The `gnutls_pkcs11_token_set_pin` function, used for changing the Security Officer PIN, can lead to a use-after-free vulnerability. This occurs when an attacker attempts to change the PIN with a NULL old PIN for a token that lacks a protected authentication path. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted certificate that contains Uniform Resource Identifier (URI) or Service (SRV) Subject Alternative Names (SANs). This could cause the certificate validation process to incorrectly fall back to checking DNS hostnames against the Common Name (CN), potentially allowing the attacker to spoof legitimate services or intercept sensitive information. |
| A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems. |
| A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure. |
| A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure. |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver |
| The AI Share & Summarize WordPress plugin before 2.0.4 does not sanitise and escape some of its shortcode attributes before outputting them in a page, allowing users with the Contributor role and above to perform Stored Cross-Site Scripting attacks. |
| Multiple Shapedsmart-post-show-pro WordPress plugin before 4.0.2, Real Testimonials Pro WordPress plugin before 3.2.5, Product Slider for WooCommerce Pro WordPress plugin before 3.5.3 Pro smart-post-show-pro WordPress plugin before 4.0.2, Real Testimonials Pro WordPress plugin before 3.2.5, Product Slider for WooCommerce Pro WordPress plugin before 3.5.3 were distributed with malicious code through the vendor's compromised update server, allowing unauthenticated attackers to deploy a second-stage payload that exfiltrates credentials and other sensitive data and grants full control of affected sites. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate group add input before caching
[BUG]
OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in
ocfs2_set_new_buffer_uptodate():
kernel BUG at fs/ocfs2/uptodate.c:509!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509
Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df
Call Trace:
ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507
ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7bbfb55a966d
[CAUSE]
ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a
user-controlled group block before ocfs2_verify_group_and_input()
validates that block number. That helper is only valid for newly
allocated metadata and asserts that the block is not already present in
the chosen metadata cache. The code also uses INODE_CACHE(inode) even
though the group descriptor belongs to main_bm_inode and later journal
accesses use that cache context instead.
[FIX]
Validate the on-disk group descriptor before caching it, then add it to
the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the
validation failure path separate from the later cleanup path so we only
remove the buffer from that cache after it has actually been inserted.
This keeps the group buffer lifetime consistent across validation,
journaling, and cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local
kptr") refactored map_kptr_match_type() to branch on btf_is_kernel()
before checking base_type(). A scalar register stored into a kptr
slot has no btf, so the btf_is_kernel(reg->btf) call dereferences
NULL.
Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf
access. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg
In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already
set by another thread, __nfs4_file_get_access should not be called
to increment the nfs4_file access count since that was already done
by the thread that added READ access to the file. The extra fi_access
count in nfs4_file can prevent the corresponding nfsd_file from being
freed.
When stopping nfs-server service, these extra access counts trigger a
BUG in kmem_cache_destroy() that shows nfsd_file object remaining on
__kmem_cache_shutdown.
This problem can be reproduced by running the Git project's test
suite over NFS. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir
In tcf_blockcast_redir(), when iterating block ports to redirect
packets to multiple devices, the mac_header_xmit flag is queried
from the wrong device. The loop sends to dev_prev but queries
dev_is_mac_header_xmit(dev) — which is the NEXT device in the
iteration, not the one being sent to.
This causes tcf_mirred_to_dev() to make incorrect decisions about
whether to push or pull the MAC header. When the block contains
mixed device types (e.g., an ethernet veth and a tunnel device),
intermediate devices get the wrong mac_header_xmit flag, leading to
skb header corruption. In the worst case, skb_push_rcsum with an
incorrect mac_len can exhaust headroom and panic.
The last device in the loop is handled correctly (line 365-366 uses
dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste
oversight for the intermediate devices.
Fix by using dev_prev instead of dev for the mac_header_xmit query,
consistent with the device actually being sent to. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calculated end_time.
setup_first_end_time() sets the first entry's end_time to
base_time + interval when the schedule is installed, so the value
is already correct.
The deleted 'end_time = sched_base_time(admin)' assignment was also
harmful independently: it would overwrite the new first entry's
pre-calculated end_time with just base_time. |
