| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in DOM in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to generic SQL Injection via the 'order' parameter in all versions up to, and including, 3.28.28 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires that the attacker also supply a valid 'orderby' parameter in the same request, as this is necessary to reach the vulnerable code path that processes and concatenates the 'order' value into the SQL query. |
| The Advanced Custom Fields: Extended plugin for WordPress is vulnerable to Privilege Escalation via Validation Bypass in all versions up to and including 0.9.2.5. The vulnerability exists due to the after_validate_save_post() function unconditionally trusting the attacker-controlled _acf_post_id POST parameter — with no authentication or integrity verification — to select a cleanup branch that silently discards all validation errors not prefixed with acfe:. This makes it possible for unauthenticated attackers to suppress both the role allow-list validation error added by acfe_field_user_roles::validate_front_value() and the administrator-role capability guard error added by acfe_module_form_action_user::validate_action(), causing wp_insert_user() to execute with an attacker-supplied administrator role argument and resulting in the creation of a new administrator-level user account. Exploitation requires the target site to expose a public ACFE frontend form configured with a Create User action that maps a role field. |
| The Breeze plugin for WordPress is vulnerable to Exposure of Sensitive Information to an Unauthorized Actor in all versions up to, and including, 2.5.2 This is due to improper verification of the `wordpress_logged_in_` cookie in the `inc/cache/execute-cache.php` file when the "Cache Logged-in Users" setting is enabled. The plugin parses the username directly from the cookie value (e.g., `username|hash`) using `substr()` to retrieve the corresponding cache file but fails to verify the session's cryptographic signature or validity with WordPress core. This makes it possible for unauthenticated attackers to supply a crafted cookie (e.g., `wordpress_logged_in_fake=admin|fake`) to trick the plugin into serving the cached HTML content generated for an administrator, leading to the disclosure of sensitive information such as private posts (including their full content), the Admin Bar, WordPress nonces, and other data visible only to logged-in administrators or other users. |
| The StatCounter – Free Real Time Visitor Stats plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to, and including, 2.1.1 This is due to insufficient output escaping on the post author's nickname in the statcounter_addToTags() function. The function is hooked to wp_head and fires on every single post page. It retrieves the post author's nickname via the_author_meta() and echoes it directly into a JavaScript double-quoted string context inside a <script> block without applying esc_js() or any equivalent JavaScript-context escaping. This makes it possible for authenticated attackers with Author-level access and above to inject arbitrary web scripts into pages that will execute whenever any user (including unauthenticated visitors) accesses a post authored by the attacker. |
| The Automotive Car Dealership Business WordPress Theme for WordPress is vulnerable to Stored Cross-Site Scripting via the 'Project Details' custom field in Portfolio Items in all versions up to, and including, 13.4.1. This is due to insufficient input sanitization and output escaping on user-supplied attributes in the 'project_details' custom field. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Plus Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'carousel_direction' parameter of the Carousel Anything widget in versions up to, and including, 6.4.15 This is due to insufficient output escaping in the render() function, where the carousel_direction value is placed into an unquoted HTML attribute (dir=) allowing attribute injection despite the use of esc_attr(). This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Deserialization of untrusted data vulnerability in QOS.CH Sarl logback logback-core (HardenedObjectInputStream (logback-core) modules) allows Object Injection albeit heavily restricted.
More precisely, an attacker able to influence serialized data sent to
SimpleSocketServer or SimpleSSLSocketServer can instantiate objects from
classes in the java.lang and java.util packages that are not explicitly
blocked.
Although deserialization is heavily restricted by HardenedObjectInputStream and no
practical way to achieve remote code execution or significant privilege
escalation has been identified, this issue constitutes a bypass of the
intended security restrictions.
This issue affects logback: through 1.5.32 inclusive. |
| The CSP report endpoint in MISP intended to limit logged CSP reports to 1 KB but incorrectly allowed reports up to 1 MB before truncation. On deployments where the endpoint is reachable by untrusted clients, this could allow attackers to generate excessive log volume and contribute to resource exhaustion or log flooding. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-tdes - fix DMA sync direction
Before DMA output is consumed by the CPU, ->dma_addr_out must be synced
with dma_sync_single_for_cpu() instead of dma_sync_single_for_device().
Using the wrong direction can return stale cache data on non-coherent
platforms. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: ah: account for ESN high bits in async callbacks
AH allocates its temporary auth/ICV layout differently when ESN is enabled:
the async ahash setup appends a 4-byte seqhi slot before the ICV or
auth_data area, but the async completion callbacks still reconstruct the
temporary layout as if seqhi were absent.
With an async AH implementation selected, that makes AH copy or compare
the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH
with ESN and forced async hmac(sha1), ping fails with 100% packet loss,
and the callback logs show the pre-fix drift:
ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24
ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36
Reconstruct the callback-side layout the same way the setup path built it
by skipping the ESN seqhi slot before locating the saved auth_data or ICV.
Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV
computation, so the async callbacks must account for the seqhi slot.
Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows
the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24
expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o
build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the
change has not been tested against a real async hardware AH engine. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix empty payload in tap skb for non-linear buffers
For non-linear skbs, virtio_transport_build_skb() goes through
virtio_transport_copy_nonlinear_skb() to copy the original payload
in the new skb to be delivered to the vsockmon tap device.
This manually initializes an iov_iter but does not set iov_iter.count.
Since the iov_iter is zero-initialized, the copy length is zero and no
payload is actually copied to the monitor interface, leaving data
un-initialized.
Fix this by removing the linear vs non-linear split and using
skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as
vhost-vsock already does. This handles both linear and non-linear skbs,
properly initializes the iov_iter, and removes the now unused
virtio_transport_copy_nonlinear_skb().
While touching this code, let's also check the return value of
skb_copy_datagram_iter(), even though it's unlikely to fail. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:si: Return state to normal if message allocation fails
There were places where nothing would get started if a message
allocation failed, so the driver needs to return to normal state. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock
damon_sysfs_quot_goal->path can be read and written by users, via DAMON
sysfs 'path' file. It can also be indirectly read, for the parameters
{on,off}line committing to DAMON. The reads for parameters committing are
protected by damon_sysfs_lock to avoid the sysfs files being destroyed
while any of the parameters are being read. But the user-driven direct
reads and writes are not protected by any lock, while the write is
deallocating the path-pointing buffer. As a result, the readers could
read the already freed buffer (user-after-free). Note that the user-reads
don't race when the same open file is used by the writer, due to kernfs's
open file locking. Nonetheless, doing the reads and writes with separate
open files would be common. Fix it by protecting both the user-direct
reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
RSI driver use both self-exit(kthread_complete_and_exit) and external-stop
(kthread_stop) when killing a kthread. Generally, kthread_stop() is called
first, and in this case, no particular issues occur.
However, in rare instances where kthread_complete_and_exit() is called
first and then kthread_stop() is called, a UAF occurs because the kthread
object, which has already exited and been freed, is accessed again.
Therefore, to prevent this with minimal modification, you must remove
kthread_stop() and change the code to wait until the self-exit operation
is completed. |
| Delta Electronics DIAView has multiple vulnerabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix a potential clc buffer length underflow
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole. |
| In the Linux kernel, the following vulnerability has been resolved:
sound: ua101: fix division by zero at probe
Add a missing sanity check for bNrChannels in detect_usb_format()
to prevent a division by zero in playback_urb_complete() and
capture_urb_complete().
USB core does not validate class-specific descriptor fields such
as bNrChannels, so drivers must verify them before use. If a
device provides bNrChannels = 0, frame_bytes becomes zero and is
later used as a divisor in the URB completion handlers, leading
to a kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix node_cnt race between extent node destroy and writeback
f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing
extent nodes. When called from f2fs_drop_inode() with I_SYNC set,
concurrent kworker writeback can insert new extent nodes into the same
extent tree, racing with the destroy and triggering f2fs_bug_on() in
__destroy_extent_node(). The scenario is as follows:
drop inode writeback
- iput
- f2fs_drop_inode // I_SYNC set
- f2fs_destroy_extent_node
- __destroy_extent_node
- while (node_cnt) {
write_lock(&et->lock)
__free_extent_tree
write_unlock(&et->lock)
- __writeback_single_inode
- f2fs_outplace_write_data
- f2fs_update_read_extent_cache
- __update_extent_tree_range
// FI_NO_EXTENT not set,
// insert new extent node
} // node_cnt == 0, exit while
- f2fs_bug_on(node_cnt) // node_cnt > 0
Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for
EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected.
This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(),
consistent with other callers (__update_extent_tree_range and
__drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and
EX_BLOCK_AGE tree. |
