| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ip_route_input in Linux kernel 2.6 before 2.6.16.8 allows local users to cause a denial of service (panic) via a request for a route for a multicast IP address, which triggers a null dereference. |
| Linux kernel before 2.6.13 allows local users to cause a denial of service (crash) via a dio transfer from the sg driver to memory mapped (mmap) IO space. |
| Directory traversal vulnerability in smbfs in Linux 2.6.16 and earlier allows local users to escape chroot restrictions for an SMB-mounted filesystem via "..\\" sequences, a similar vulnerability to CVE-2006-1863. |
| The virtual memory implementation in Linux kernel 2.6.x allows local users to cause a denial of service (panic) by running lsof a large number of times in a way that produces a heavy system load. |
| lease_init in fs/locks.c in Linux kernel before 2.6.16.16 allows attackers to cause a denial of service (fcntl_setlease lockup) via actions that cause lease_init to free a lock that might not have been allocated on the stack. |
| Directory traversal vulnerability in Unreal Tournament Server 436 and earlier allows remote attackers to access known files via a ".." (dot dot) in an unreal:// URL. |
| SCTP in Linux kernel before 2.6.16.17 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a chunk length that is inconsistent with the actual length of provided parameters. |
| The huft_build function in inflate.c in the zlib routines in the Linux kernel before 2.6.12.5 returns the wrong value, which allows remote attackers to cause a denial of service (kernel crash) via a certain compressed file that leads to a null pointer dereference, a different vulnerability than CVE-2005-2458. |
| Stack-based buffer overflow in the sendmsg function call in the Linux kernel 2.6 before 2.6.13.1 allows local users to execute arbitrary code by calling sendmsg and modifying the message contents in another thread. |
| Buffer overflow in the xdr_xcode_array2 function in xdr.c in Linux kernel 2.6.12, as used in SuSE Linux Enterprise Server 9, might allow remote attackers to cause a denial of service and possibly execute arbitrary code via crafted XDR data for the nfsacl protocol. |
| The Linux kernel 2.6.17.10 and 2.6.17.11 and 2.6.18-rc5 allows local users to cause a denial of service (crash) via an SCTP socket with a certain SO_LINGER value, possibly related to the patch for CVE-2006-3745. NOTE: older kernel versions for specific Linux distributions are also affected, due to backporting of the CVE-2006-3745 patch. |
| Signed integer overflow in the bttv_read function in the bttv driver (bttv-driver.c) in Linux kernel before 2.4.20 has unknown impact and attack vectors. |
| Race condition in Linux kernel 2.6.17.4 and earlier allows local users to gain root privileges by using prctl with PR_SET_DUMPABLE in a way that causes /proc/self/environ to become setuid root. |
| sys_mbind in mempolicy.c in Linux kernel 2.6.16 and earlier does not sanity check the maxnod variable before making certain computations for the get_nodes function, which has unknown impact and attack vectors. |
| The /proc filesystem in Linux allows local users to obtain sensitive information by opening various entries in /proc/self before executing a setuid program, which causes the program to fail to change the ownership and permissions of those entries. |
| The Linux kernel 2.4.20 and earlier, and 2.5.x, when running on x86 systems, allows local users to cause a denial of service (hang) via the emulation mode, which does not properly clear TF and NT EFLAGs. |
| net/ipv4/af_inet.c in Linux kernel 2.4 does not clear sockaddr_in.sin_zero before returning IPv4 socket names from the (1) getsockname, (2) getpeername, and (3) accept functions, which allows local users to obtain portions of potentially sensitive memory. |
| The encrypted loop device in Linux kernel 2.4.10 and earlier does not authenticate the entity that is encrypting data, which allows local users to modify encrypted data without knowing the key. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
