| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/ipv6: ioam6: prevent schema length wraparound in trace fill
ioam6_fill_trace_data() stores the schema contribution to the trace
length in a u8. With bit 22 enabled and the largest schema payload,
sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the
remaining-space check. __ioam6_fill_trace_data() then positions the
write cursor without reserving the schema area but still copies the
4-byte schema header and the full schema payload, overrunning the trace
buffer.
Keep sclen in an unsigned int so the remaining-space check and the write
cursor calculation both see the full schema length. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Properly mark live registers for indirect jumps
For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: adxl380: Avoid reading more entries than present in FIFO
The interrupt handler reads FIFO entries in batches of N samples, where N
is the number of scan elements that have been enabled. However, the sensor
fills the FIFO one sample at a time, even when more than one channel is
enabled. Therefore,the number of entries reported by the FIFO status
registers may not be a multiple of N; if this number is not a multiple, the
number of entries read from the FIFO may exceed the number of entries
actually present.
To fix the above issue, round down the number of FIFO entries read from the
status registers so that it is always a multiple of N. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: define and enforce CEPH_MAX_KEY_LEN
When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.
The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nfc: nci: Fix parameter validation for packet data
Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for
packet data") communication with nci nfc chips is not working any more.
The mentioned commit tries to fix access of uninitialized data, but
failed to understand that in some cases the data packet is of variable
length and can therefore not be compared to the maximum packet length
given by the sizeof(struct). |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Return queued buffers on start_streaming() failure
Return buffers if streaming fails to start due to uvc_pm_get() error.
This bug may be responsible for a warning I got running
while :; do yavta -c3 /dev/video0; done
on an xHCI controller which failed under this workload.
I had no luck reproducing this warning again to confirm.
xhci_hcd 0000:09:00.0: HC died; cleaning up
usb 13-2: USB disconnect, device number 2
WARNING: CPU: 2 PID: 29386 at drivers/media/common/videobuf2/videobuf2-core.c:1803 vb2_start_streaming+0xac/0x120 |
| ntpd will crash if the server is not NTS-enabled (no certificate) and it receives an NTS-enabled client request (mode 3). |
| A vulnerability was detected in Open5GS up to 2.7.7. This affects the function gsm_build_pdu_session_establishment_accept of the file /src/smf/gsm-build.c of the component SMF. The manipulation results in denial of service. The attack can be launched remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in D-Link DCS-935L up to 1.10.01. The impacted element is the function SetDeviceSettings of the file /web/cgi-bin/hnap/hnap_service of the component HNAP Service. The manipulation of the argument AdminPassword results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. |
| A security flaw has been discovered in Devs Palace ERP Online up to 4.0.0. Affected by this issue is some unknown functionality of the file /inventory/sales_save. The manipulation results in cross site scripting. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| An issue in the Bluetooth RFCOMM service of Parani M10 Motorcycle Intercom v2.1.3 allows unauthorized attackers to cause a Denial of Service (DoS) via supplying crafted RFCOMM frames. |
| A vulnerability was detected in Open5GS up to 2.7.7. The affected element is the function update_authorized_pcc_rule_and_qos of the file /src/smf/npcf-handler.c of the component SMF. The manipulation results in denial of service. The attack may be launched remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In manikandan580 School-management-system 1.0, a reflected cross-site scripting (XSS) vulnerability exists in /studentms/admin/contact-us.php via the email POST parameter. |
| AiAssistant is affected by type privilege bypass, successful exploitation of this vulnerability may affect service availability. |
| Cross-Site Scripting (XSS) vulnerability exists in HTMLy version 3.1.1 in the content creation functionality at the /add/content?type=image endpoint. The application fails to properly sanitize user input, allowing injection of arbitrary code |
| Vulnerability in the Oracle Macoron Tool product of Oracle Open Source Projects. The supported versions that is affected is v0.22.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Macaron Tool. Successful attacks of this vulnerability can result in Oracle Macaron Tool failing host address validation. |
| OpenStack Cyborg before 16.0.1 uses rule:allow (check_str='@') as the default policy for multiple API endpoints. This unconditionally authorizes any request carrying a valid Keystone token regardless of roles, project membership, or scope. An authenticated user with zero role assignments can complete various actions such as reprogramming FPGA bitstreams on arbitrary compute nodes via agent RPC. |
| In OpenStack Cyborg before 16.0.1, the Accelerator Request (ARQ) API does not enforce project ownership at any layer. The project_id column in the database is never populated (NULL for every ARQ), database queries have no project filtering, and policy checks are self-referential (the authorize_wsgi decorator compares the caller's project_id with itself rather than the target resource). Any authenticated non-admin user can complete various actions such as deleting ARQs bound to other projects' instances, aka cross-tenant denial of service. |
| Inngest is a platform for running event-driven and scheduled background functions with queueing, retries, and step orchestration. Versions 3.22.0 through 3.53.1 contain a vulnerability that allows unauthenticated remote attackers to exfiltrate environment variables from the host process via the serve() HTTP handler. The serve() handler implements GET, POST, and PUT methods. Requests using PATCH, OPTIONS, or DELETE fall through to a generic handler that returns diagnostic information. A change introduced in v3.22.0 caused this diagnostic response to include the contents of process.env, exposing any secrets, API keys, or credentials present in the environment. An application is vulnerable if its serve() endpoint is reachable via PATCH, OPTIONS, or DELETE requests, which is common in setups like Next.js Pages Router or Express's app.use(...). Not affected are Next.js App Router handlers that export only GET, POST, and PUT, and applications using the connect worker method. This issue has been fixed in version 3.54.0. To work around this issue if upgrading is not immediately possible, restrict the serve() endpoint at the framework or reverse-proxy layer to accept only GET, POST, and PUT. The Inngest serve() endpoint does not require any other HTTP methods. |
