| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix irq resource leak
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Handle DBC deactivation if the owner went away
When a DBC is released, the device sends a QAIC_TRANS_DEACTIVATE_FROM_DEV
transaction to the host over the QAIC_CONTROL MHI channel. QAIC handles
this by calling decode_deactivate() to release the resources allocated for
that DBC. Since that handling is done in the qaic_manage_ioctl() context,
if the user goes away before receiving and handling the deactivation, the
host will be out-of-sync with the DBCs available for use, and the DBC
resources will not be freed unless the device is removed. If another user
loads and requests to activate a network, then the device assigns the same
DBC to that network, QAIC will "indefinitely" wait for dbc->in_use = false,
leading the user process to hang.
As a solution to this, handle QAIC_TRANS_DEACTIVATE_FROM_DEV transactions
that are received after the user has gone away. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable kprobe_multi programs at attach time
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate LTK enc_size on load
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists
hci_cmd_sync_queue_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites to handle that. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_helper: pass helper to expect cleanup
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the
station exists but not whether it is actually a TDLS station. This
allows the operation to proceed for non-TDLS stations, causing
unintended side effects like modifying channel context and HT
protection before failing.
Add a check for sta->sta.tdls early in the ENABLE_LINK case, before
any side effects occur, to ensure the operation is only allowed for
actual TDLS peers. |
| A vulnerability in the web interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass authentication and execute script files on an affected device to obtain root access to the underlying operating system.
This vulnerability is due to an improper system process that is created at boot time. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute a variety of scripts and commands that allow root access to the device. |
| A vulnerability in B1 Free Archiver v1.5.86 allows files extracted from downloaded archives to bypass Windows Mark of the Web (MotW) protections. When an archive is downloaded from the internet and extracted using B1 Free Archiver, the software fails to propagate the 'Zone.Identifier' alternate data stream to the extracted files. As a result, these files can be executed without triggering Windows Defender SmartScreen warnings or security prompts, enabling untrusted code execution without standard security restrictions. |
| In Exim before 4.99.2, when JSON lookup is enabled, an out-of-bounds heap write can occur when a JSON operator encounters malformed JSON in an untrusted header, because of an incorrect implementation of \ skipping. |
| SBC codec crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service and possible code execution |
| A stack-based buffer overflow in mangle_to_hex_lower() and mangle_to_hex_upper() in src/rp_cpu.c in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted rule file, or via the -j or -k rule options used with password candidates of 128 or more characters. The vulnerability is caused by a bounds check that fails to account for the 2x expansion that occurs when password bytes are converted to hexadecimal. |
| Two heap-based out-of-bounds read vulnerabilities in the STL ASCII file parser in Open CASCADE Technology (OCCT) V8_0_0_rc5 exist in RWStl_Reader::ReadAscii because buffers returned by Standard_ReadLineBuffer::ReadLine() are not properly length-validated before strncasecmp or direct byte access. User-assisted attackers can trigger these issues by persuading a victim to open a crafted STL file with extremely short lines, resulting in a denial of service or possible information disclosure. |
| A heap-based out-of-bounds read vulnerability in RWObj_Reader::read in the OBJ file parser in Open CASCADE Technology (OCCT) V8_0_0_rc5 allows user-assisted attackers to cause a denial of service or obtain sensitive information by persuading a victim to open a crafted OBJ file. The issue occurs because Standard_ReadLineBuffer::ReadLine() can return a 1-byte buffer for a minimal OBJ line, and RWObj_Reader::read() calls pushIndices(aLine + 2) without validating the buffer length. |
| An issue was discovered in VrmlData_IndexedFaceSet::TShape in the VRML V2.0 parser in Open CASCADE Technology (OCCT) V8_0_0_rc5 allows attackers to cause a denial of service via a crafted VRML file. The issue occurs because malformed VRML input can trigger dereference of a corrupt or unvalidated pointer during shape construction in libTKDEVRML.so. |
| An out-of-bounds read vulnerability in VrmlData_IndexedLineSet::TShape in the VRML parser in Open CASCADE Technology (OCCT) V8_0_0_rc5 allows attackers to cause a denial of service via a crafted VRML file. The issue occurs because coordIndex values from parsed input are used as direct array indices without validation against the size of the coordinate array during geometry processing. |
| Cross-Site Scripting (XSS) in V2Board thru 1.7.4. The custom_html field in theme configuration is rendered using Blade unescaped output in public/theme/v2board/dashboard.blade.php. An admin can inject arbitrary JavaScript via the saveThemeConfig API. All site visitors execute the payload, enabling cookie theft, session hijacking, or phishing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ftgmac100: fix ring allocation unwind on open failure
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix stack out-of-bounds read in init_card
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stack.
A USB device with a product name containing many non-ASCII, non-space
characters (e.g. multibyte UTF-8) will reliably trigger this as follows:
BUG: KASAN: stack-out-of-bounds in copy_valid_id_string
sound/core/init.c:696 [inline]
BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c
sound/core/init.c:718
The off-by-one has been present since commit bafeee5b1f8d ("ALSA:
snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1),
which first introduced this whitespace-stripping loop. The original
code never accounted for the null terminator when bounding the copy.
Fix this by changing the loop bound to `sizeof(card->id) - 1`,
ensuring at least one byte remains as the null terminator. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
