| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/ena: fix missing lock when update devlink params
Fix assert lock warning while calling devl_param_driverinit_value_set()
in ena.
WARNING: net/devlink/core.c:261 at devl_assert_locked+0x62/0x90, CPU#0: kworker/0:0/9
CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.19.0-rc2+ #1 PREEMPT(lazy)
Hardware name: Amazon EC2 m8i-flex.4xlarge/, BIOS 1.0 10/16/2017
Workqueue: events work_for_cpu_fn
RIP: 0010:devl_assert_locked+0x62/0x90
Call Trace:
<TASK>
devl_param_driverinit_value_set+0x15/0x1c0
ena_devlink_alloc+0x18c/0x220 [ena]
? __pfx_ena_devlink_alloc+0x10/0x10 [ena]
? trace_hardirqs_on+0x18/0x140
? lockdep_hardirqs_on+0x8c/0x130
? __raw_spin_unlock_irqrestore+0x5d/0x80
? __raw_spin_unlock_irqrestore+0x46/0x80
? devm_ioremap_wc+0x9a/0xd0
ena_probe+0x4d2/0x1b20 [ena]
? __lock_acquire+0x56a/0xbd0
? __pfx_ena_probe+0x10/0x10 [ena]
? local_clock+0x15/0x30
? __lock_release.isra.0+0x1c9/0x340
? mark_held_locks+0x40/0x70
? lockdep_hardirqs_on_prepare.part.0+0x92/0x170
? trace_hardirqs_on+0x18/0x140
? lockdep_hardirqs_on+0x8c/0x130
? __raw_spin_unlock_irqrestore+0x5d/0x80
? __raw_spin_unlock_irqrestore+0x46/0x80
? __pfx_ena_probe+0x10/0x10 [ena]
......
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: make calc_target() set t->paused, not just clear it
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: call skb_orphan() before skb_attempt_defer_free()
Standard UDP receive path does not use skb->destructor.
But skmsg layer does use it, since it calls skb_set_owner_sk_safe()
from udp_read_skb().
This then triggers this warning in skb_attempt_defer_free():
DEBUG_NET_WARN_ON_ONCE(skb->destructor);
We must call skb_orphan() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: fix a double free in snd_ac97_controller_register()
If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.
Found by code review. |
| Neo4j Enterprise and Community editions versions prior to 2026.01.3 and 5.26.21 are vulnerable to a potential information disclosure by a user who has ability to access the local log files.
The "obfuscate_literals" option in the query logs does not redact error information, exposing unredacted data in the query log when a customer writes a query that fails. It can allow a user with legitimate access to the local log files to obtain information they are not authorised to see. If this user is also in a position to run queries and trigger errors, this vulnerability can potentially help them to infer information they are not authorised to see through their intended database access.
We recommend upgrading to versions 2026.01.3 (or 5.26.21) where the issue is fixed, and reviewing query log files permissions to ensure restricted access. If your configuration had db.logs.query.obfuscate_literals enabled, and you wish the obfuscation to cover the error messages as well, you need to enable the new configuration setting db.logs.query.obfuscate_errors once you have upgraded Neo4j. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
Call Trace:
__hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72)
bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517)
ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66)
ptp_clock_unregister (drivers/ptp/ptp_clock.c:518)
bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134)
bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889)
Lines are against commit f8f9c1f4d0c7 ("Linux 6.19-rc3")
Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before
freeing HWRM resources. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix aux device unplugging when rdma is not supported by vport
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL pointer dereference in do_abort_log_replay()
Coverity reported a NULL pointer dereference issue (CID 1666756) in
do_abort_log_replay(). When btrfs_alloc_path() fails in
replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay()
calls do_abort_log_replay() which unconditionally dereferences
wc->subvol_path when attempting to print debug information. Fix this by
adding a NULL check before dereferencing wc->subvol_path in
do_abort_log_replay(). |
| In the Linux kernel, the following vulnerability has been resolved:
PM: hibernate: Fix crash when freeing invalid crypto compressor
When crypto_alloc_acomp() fails, it returns an ERR_PTR value, not NULL.
The cleanup code in save_compressed_image() and load_compressed_image()
unconditionally calls crypto_free_acomp() without checking for ERR_PTR,
which causes crypto_acomp_tfm() to dereference an invalid pointer and
crash the kernel.
This can be triggered when the compression algorithm is unavailable
(e.g., CONFIG_CRYPTO_LZO not enabled).
Fix by adding IS_ERR_OR_NULL() checks before calling crypto_free_acomp()
and acomp_request_free(), similar to the existing kthread_stop() check.
[ rjw: Added 2 empty code lines ] |
| Missing Authorization vulnerability in yaadsarig Yaad Sarig Payment Gateway For WC yaad-sarig-payment-gateway-for-wc allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Yaad Sarig Payment Gateway For WC: from n/a through <= 2.2.10. |
| Missing Authorization vulnerability in merkulove Grider for Elementor grider-elementor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Grider for Elementor: from n/a through <= 1.0.8. |
| Missing Authorization vulnerability in merkulove Lottier for WPBakery lottier-wpbakery allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Lottier for WPBakery: from n/a through <= 1.1.7. |
| Missing Authorization vulnerability in templateinvaders TI WooCommerce Wishlist ti-woocommerce-wishlist allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects TI WooCommerce Wishlist: from n/a through <= 2.10.0. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Barn2 Plugins Document Library Lite document-library-lite allows DOM-Based XSS.This issue affects Document Library Lite: from n/a through <= 1.1.7. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in LiquidThemes Hub Core hub-core allows PHP Local File Inclusion.This issue affects Hub Core: from n/a through <= 5.0.8. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Vektor,Inc. VK Google Job Posting Manager vk-google-job-posting-manager allows Stored XSS.This issue affects VK Google Job Posting Manager: from n/a through <= 1.2.21. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ThemeNectar Salient Portfolio salient-portfolio allows Stored XSS.This issue affects Salient Portfolio: from n/a through <= 1.8.2. |
| Missing Authorization vulnerability in Nitesh Ultimate Auction ultimate-auction allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Ultimate Auction : from n/a through <= 4.3.2. |
| Missing Authorization vulnerability in merkulove Huger for Elementor huger-elementor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Huger for Elementor: from n/a through <= 1.1.5. |
| The Amazon SageMaker Python SDK before v3.2.0 and v2.256.0 includes the ModelBuilder HMAC signing key in the cleartext response elements of the DescribeTrainingJob function. A third party with permissions to both call this API and permissions to modify objects in the Training Jobs S3 output location may have the ability to upload arbitrary artifacts which are executed the next time the Training Job is invoked. |
