| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security vulnerability has been identified in FlexNet Publisher lmadmin. The vulnerability exists in a SOAP handler, where a hardcoded authentication bypass could allow an unauthenticated user to obtain a privileged administrator session without providing valid credentials. |
| A predictable seed in the pseudo-random number generator (PRNG) in the IFTTT pairing token generation of the ASUS RT-BE57 router allows an unauthenticated nearby user to derive the pairing token and read or modify router settings via observed values from an administrator-initiated IFTTT pairing session.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. |
| A stack-based buffer overflow in the ASUS router modules allows an authenticated nearby user to execute arbitrary code via a crafted configuration file upload that exceeds the expected buffer size.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. |
| ieee802154_decipher_data_frame() in subsys/net/l2/ieee802154/ieee802154_frame.c computed payload_len = net_pkt_get_len(pkt) - ll_hdr_len - authtag_len without first checking that the received frame is at least ll_hdr_len + authtag_len bytes long. All three variables are uint8_t, so a frame whose payload is shorter than the configured authentication tag makes the subtraction wrap around to a large value (up to 255).
The wrapped length is passed unchanged to ieee802154_decrypt_auth() and on to the CCM operation as cipher_pkt.in_len/out_buf_max, with apkt->tag pointing at frame + ll_hdr_len + payload_len. Because the receive buffer is allocated to the exact length of the frame received from the radio driver, the crypto layer then reads several hundred bytes past the end of the packet buffer and writes the same number of decrypted bytes back over it in place. The frame's authentication tag is only verified after this processing has taken place, so no key material, association or prior authentication is needed — a single crafted short frame from any device in radio range is sufficient. Frame validation in ieee802154_validate_frame() does not prevent it: a data frame is accepted with a one-byte payload.
The result is an out-of-bounds read and an out-of-bounds write of up to roughly 240 bytes into the adjacent network-buffer pool, corrupting other packets or allocator metadata and typically faulting the target. The out-of-bounds content is not attacker-chosen (it is ciphertext XOR keystream over out-of-bounds memory) and the frame is dropped when tag verification fails, so the primary impact is memory corruption and denial of service rather than information disclosure.
Exposure is limited to configurations that enable the experimental CONFIG_NET_L2_IEEE802154_SECURITY option, select a crypto device via CONFIG_NET_L2_IEEE802154_SECURITY_CRYPTO_DEV_NAME, and have established a security session with a level other than IEEE802154_SECURITY_LEVEL_NONE; with security disabled or at level NONE the tag length is zero and no underflow occurs. The fix rejects frames shorter than ll_hdr_len + authtag_len before the subtraction, and adds the matching guard on the transmit side in ieee802154_create_data_frame(). |
| Insertion of Sensitive Information into Log File in certain ASUS router models allows a remote authenticated attacker to obtain DDNS credentials from the system log, potentially enabling modification of DNS settings.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. |
| Improper Neutralization of Input During Web Page Generation (“Cross-site Scripting”) in ASUS router modules allows a remote attacker to read DOM information, modify router settings, and cause a denial-of-service condition when an authenticated user visits a crafted URL.Refer to the '
Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. |
| This vulnerability exists in the ERP system due to unsafe deserialization of user controlled data in the affected functionality. An unauthenticated remote attacker could exploit this vulnerability by supplying specially crafted data to the vulnerable functionality of the targeted system.
Successful exploitation of this vulnerability could allow the attacker to execute arbitrary code, manipulate application data or perform other unintended actions on the targeted system. |
| This vulnerability exists in the ERP system due to insufficient validation and parameterization of user supplied input in an API endpoint. An unauthenticated remote attacker could exploit this vulnerability by supplying specially crafted input to the vulnerable endpoint.
Successful exploitation of this vulnerability could allow the attacker to perform SQL injection attacks on the targeted system. |
| This vulnerability exists in the ERP system due to improper validation of payment callback parameters and inadequate authentication controls in API endpoint. An unauthenticated remote attacker could exploit this vulnerability by manipulating the parameter to cause the application to establish an authenticated session for an arbitrary user without valid payment verification.
Successful exploitation of this vulnerability could allow the attacker to bypass authentication and gain unauthorized access to other user accounts on the targeted system. |
| Backstage is an open framework for building developer portals. Prior to 1.14.6, the @backstage/plugin-techdocs-node package is affected by improper validation of mkdocs theme configuration in techdocs. When TechDocs is configured to build documentation locally or in a container, a user with write access to a registered repository can include configuration values in mkdocs.yml that cause arbitrary code execution during the documentation build process. This issue is fixed in versions 1.14.6 and 1.15.4. |
| Backstage is an open framework for building developer portals. Prior to 1.54.6, cloud storage catalog providers did not sufficiently validate object paths. A principal able to create or rename objects in a configured Azure Blob Storage or AWS S3 catalog source could cause catalog descriptors to be read from outside the intended storage boundary, limited to locations reachable with the backend's configured credentials. This issue is fixed in 1.54.6. |
| Backstage is an open framework for building developer portals. Prior to 0.4.20, the @backstage/plugin-auth-backend-module-oidc-provider package is affected by improper authentication in the oidc provider. Deployments using OIDC email-based identity resolution with a provider that permits unverified email addresses may allow an authenticated provider user to assume another catalog identity. This may grant access and permissions associated with that user. No direct availability impact is demonstrated. This issue is fixed in version 0.4.20. |
| Backstage is an open framework for building developer portals. From 0.5.0 until 0.6.18, the @backstage/plugin-proxy-backend package is affected by inconsistent credential enforcement for overlapping proxy routes. An operator can configure overlapping proxy paths with different credential requirements. When a parent path permits unauthenticated access and a nested path requires credentials, the parent exemption can also cover requests handled by the nested proxy. An unauthenticated caller may therefore reach the nested upstream through Backstage, including with static upstream credentials configured for that proxy. This issue is fixed in version 0.6.18. |
| yawkat LZ4 Java provides LZ4 compression for Java. From 1.7.0 until 1.11.4, net.jpountz.util.Native.load() uses File.createTempFile to create an exclusive temporary .lck file but derives the native-library path by removing the suffix, then FileOutputStream opens that predictable path without exclusive creation, allowing another local user with access to the same shared temporary directory to create or replace the library file before System.load() uses it. Successful exploitation depends on shared-directory permissions, host protections, and winning the race, and can execute native code as the victim; hardened systems may instead cause library loading to fail and fall back to Java implementations. Configurations using a system library, a private java.io.tmpdir, or Java-only implementations are not affected. This issue is fixed in version 1.11.4. |
| Handlebars provides the power necessary to let users build semantic templates. From 4.0.0 until 4.7.10, Handlebars.compile() and Handlebars.precompile() accept pre-parsed AST objects while validating only selected PathExpression, NumberLiteral, and BooleanLiteral values. This issue bypasses the AST validation introduced in version 4.7.9 for CVE-2026-33937. An attacker who can supply an object instead of a template string can place JavaScript expressions in unchecked values such as Program.blockParams.length, a non-PathExpression parameter depth, a non-string StringLiteral.value, or a non-string PathExpression.original. The compiler emits those values into generated JavaScript, causing code execution in the server process when compile output renders or wherever precompile output is loaded. Applications that pass only template strings are not affected. This issue is fixed in version 4.7.10. |
| Hydra is a framework for elegantly configuring complex applications. Prior to 1.3.6 and 1.4.0.dev9, Hydra passes Python logging configuration to logging.config.dictConfig() without applying Hydra's target policy to handler class values or formatter, filter, handler, queue, and listener factories. An attacker who controls Hydra logging configuration can therefore select an importable class or factory and cause it to be invoked with the application's privileges, even in versions where instantiate() is protected because the logging path does not use instantiate(). This issue is fixed in versions 1.3.6 and 1.4.0.dev9. |
| A heap-based buffer overflow was found in GIMP’s Hot color filter plug-in. For very large images, a pixel buffer is allocated using overflowing 32-bit width * height (and related) arithmetic while the filter’s pixel access path uses the true image size, after integer overflow in the allocation size |
| A flaw was found in pulp-ansible's bearer-token refresh for collection remotes. The access token is kept in one module-level variable and reused for every token download in that worker. A user who can sync an Ansible remote that uses token refresh, and can point that remote at a server they control, receives an access token obtained for a different remote, and can reuse it at the service that issued it. Content stored in Pulp is not changed, and the service is not stopped. |
| Out-of-bounds write via the TLS 1.3 handshake message cache in NetX Duo in Eclipse ThreadX NetX Duo 6.5.1.202602 allows a handshake message larger than the cache writes past it and on into the rest of the session control block, which holds pointers. A malicious or compromised server can make a TLS 1.3 client produce such a message before certificate authentication completes, so no server certificate is needed to reach it. |
| Joomla Extension - ordasoft.com - Unauthenticated SQL injection in OrdaSoft Simple Membership < 7.4.0 - site/simplemembership.php dispatches task=checkLoginPass with no authentication or access control check of any kind. The handler reads a login request parameter through Joomla’s generic, non-sanitizing input filter, which strips HTML/script tags but never touches quotes or SQL syntax, and concatenates it directly into a query string with no escaping or parameterization: |
