| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock"
This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1.
Under rare circumstances, multiple udev threads can collect i801 device
info on boot and walk i801_acpi_io_handler somewhat concurrently. The
first will note the area is reserved by acpi to prevent further touches.
This ultimately causes the area to be deregistered. The second will
enter i801_acpi_io_handler after the area is unregistered but before a
check can be made that the area is unregistered. i2c_lock_bus relies on
the now unregistered area containing lock_ops to lock the bus. The end
result is a kernel panic on boot with the following backtrace;
[ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102)
[ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 14.971880] #PF: supervisor read access in kernel mode
[ 14.971884] #PF: error_code(0x0000) - not-present page
[ 14.971887] PGD 0 P4D 0
[ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI
[ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1
[ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023
[ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b
[ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282
[ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568
[ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000
[ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028
[ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580
[ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000
[ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000
[ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0
[ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 14.971972] Call Trace:
[ 14.971977] <TASK>
[ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972014] ? __die_body.cold+0x8/0xd
[ 14.972021] ? page_fault_oops+0x132/0x170
[ 14.972028] ? exc_page_fault+0x61/0x150
[ 14.972036] ? asm_exc_page_fault+0x22/0x30
[ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801]
[ 14.972085] acpi_ex_access_region+0x5b/0xd0
[ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0
[ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230
[ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310
[ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110
[ 14.972121] acpi_ds_exec_end_op+0x321/0x510
[ 14.972127] acpi_ps_parse_loop+0xf7/0x680
[ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0
[ 14.972143] acpi_ps_execute_method+0x137/0x270
[ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0
[ 14.972158] acpi_evaluate_object+0x134/0x2f0
[ 14.972164] acpi_evaluate_integer+0x50/0xe0
[ 14.972173] ? vsnprintf+0x24b/0x570
[ 14.972181] acpi_ac_get_state.part.0+0x23/0x70
[ 14.972189] get_ac_property+0x4e/0x60
[ 14.972195] power_supply_show_property+0x90/0x1f0
[ 14.972205] add_prop_uevent+0x29/0x90
[ 14.972213] power_supply_uevent+0x109/0x1d0
[ 14.972222] dev_uevent+0x10e/0x2f0
[ 14.972228] uevent_show+0x8e/0x100
[ 14.972236] dev_attr_show+0x19
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: register phy led_triggers during probe to avoid AB-BA deadlock
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: radiotap: reject radiotap with unknown bits
The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/client: Do not destroy NULL modes
'modes' in drm_client_modeset_probe may fail to kcalloc. If this
occurs, we jump to 'out', calling modes_destroy on it, which
dereferences it. This may result in a NULL pointer dereference in the
error case. Prevent that. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Compare MACs in constant time
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix locking for bcm_op runtime updates
Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
added a locking for some variables that can be modified at runtime when
updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().
Usually the RX_SETUP only handles and filters incoming traffic with one
exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is
sent when a specific RTR frame is received. Therefore the rx bcm_op uses
bcm_can_tx() which uses the bcm_tx_lock that was only initialized in
bcm_tx_setup(). Add the missing spin_lock_init() when allocating the
bcm_op in bcm_rx_setup() to handle the RTR case properly. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry
Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X
interrupt to the host using a writel(), which generates a PCI posted write
transaction. There's no completion for posted writes, so the writel() may
return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also
unmaps the outbound ATU entry used for the PCI write, so the write races
with the unmap.
If the PCI write loses the race with the ATU unmap, the write may corrupt
host memory or cause IOMMU errors, e.g., these when running fio with a
larger queue depth against nvmet-pci-epf:
arm-smmu-v3 fc900000.iommu: 0x0000010000000010
arm-smmu-v3 fc900000.iommu: 0x0000020000000000
arm-smmu-v3 fc900000.iommu: 0x000000090000f040
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0
arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0
Flush the write by performing a readl() of the same address to ensure that
the write has reached the destination before the ATU entry is unmapped.
The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit
8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there
it was solved by dedicating an outbound iATU only for MSI. We can't do the
same for MSI-X because each vector can have a different msg_addr and the
msg_addr may be changed while the vector is masked.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix admin queue leak on controller reset
When nvme_alloc_admin_tag_set() is called during a controller reset,
a previous admin queue may still exist. Release it properly before
allocating a new one to avoid orphaning the old queue.
This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix
admin request_queue lifetime"). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack-out-of-bounds write in devmap
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix error handling in slot reset
If the device has not recovered after slot reset is called, it goes to
out label for error handling. There it could make decision based on
uninitialized hive pointer and could result in accessing an uninitialized
list.
Initialize the list and hive properly so that it handles the error
situation and also releases the reset domain lock which is acquired
during error_detected callback.
(cherry picked from commit bb71362182e59caa227e4192da5a612b09349696) |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcp251x: fix deadlock in error path of mcp251x_open
The mcp251x_open() function call free_irq() in its error path with the
mpc_lock mutex held. But if an interrupt already occurred the
interrupt handler will be waiting for the mpc_lock and free_irq() will
deadlock waiting for the handler to finish.
This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can:
mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but
for the error path.
To solve this issue move the call to free_irq() after the lock is
released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ
handler will exit right away once it acquired the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock()
Even though we check that we "should" be able to do lc_get_cumulative()
while holding the device->al_lock spinlock, it may still fail,
if some other code path decided to do lc_try_lock() with bad timing.
If that happened, we logged "LOGIC BUG for enr=...",
but still did not return an error.
The rest of the code now assumed that this request has references
for the relevant activity log extents.
The implcations are that during an active resync, mutual exclusivity of
resync versus application IO is not guaranteed. And a potential crash
at this point may not realizs that these extents could have been target
of in-flight IO and would need to be resynced just in case.
Also, once the request completes, it will give up activity log references it
does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put().
Fix:
Do not crash the kernel for a condition that is harmless during normal
operation: also catch "e->refcnt == 0", not only "e == NULL"
when being noisy about "al_complete_io() called on inactive extent %u\n".
And do not try to be smart and "guess" whether something will work, then
be surprised when it does not.
Deal with the fact that it may or may not work. If it does not, remember a
possible "partially in activity log" state (only possible for requests that
cross extent boundaries), and return an error code from
drbd_al_begin_io_nonblock().
A latter call for the same request will then resume from where we left off. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata: cancel pending work after clearing deferred_qc
Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by
ap->ops->qc_defer() returning non-zero before issuing the deferred qc.
ata_scsi_schedule_deferred_qc() is called during each command completion.
This function will check if there is a deferred QC, and if
ap->ops->qc_defer() returns zero, meaning that it is possible to queue the
deferred qc at this time (without being deferred), then it will queue the
work which will issue the deferred qc.
Once the work get to run, which can potentially be a very long time after
the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns
non-zero.
While we hold the ap->lock both when assigning and clearing deferred_qc,
and the work itself holds the ap->lock, the code currently does not cancel
the work after clearing the deferred qc.
This means that the following scenario can happen:
1) One or several NCQ commands are queued.
2) A non-NCQ command is queued, gets stored in ap->deferred_qc.
3) Last NCQ command gets completed, work is queued to issue the deferred
qc.
4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is
currently NOT canceled.
5) Port is reset.
6) One or several NCQ commands are queued.
7) A non-NCQ command is queued, gets stored in ap->deferred_qc.
8) Work is finally run. Yet at this time, there is still NCQ commands in
flight.
The work in 8) really belongs to the non-NCQ command in 2), not to the
non-NCQ command in 7). The reason why the work is executed when it is not
supposed to, is because it was never canceled when ap->deferred_qc was
cleared in 4). Thus, ensure that we always cancel the work after clearing
ap->deferred_qc.
Another potential fix would have been to let ata_scsi_deferred_qc_work() do
nothing if ap->ops->qc_defer() returns non-zero. However, canceling the
work when clearing ap->deferred_qc seems slightly more logical, as we hold
the ap->lock when clearing ap->deferred_qc, so we know that the work cannot
be holding the lock. (The function could be waiting for the lock, but that
is okay since it will do nothing if ap->deferred_qc is not set.) |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fred: Correct speculative safety in fred_extint()
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix crash in ethtool offline loopback test
Since the conversion of ice to page pool, the ethtool loopback test
crashes:
BUG: kernel NULL pointer dereference, address: 000000000000000c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 1100f1067 P4D 0
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 23 UID: 0 PID: 5904 Comm: ethtool Kdump: loaded Not tainted 6.19.0-0.rc7.260128g1f97d9dcf5364.49.eln154.x86_64 #1 PREEMPT(lazy)
Hardware name: [...]
RIP: 0010:ice_alloc_rx_bufs+0x1cd/0x310 [ice]
Code: 83 6c 24 30 01 66 41 89 47 08 0f 84 c0 00 00 00 41 0f b7 dc 48 8b 44 24 18 48 c1 e3 04 41 bb 00 10 00 00 48 8d 2c 18 8b 04 24 <89> 45 0c 41 8b 4d 00 49 d3 e3 44 3b 5c 24 24 0f 83 ac fe ff ff 44
RSP: 0018:ff7894738aa1f768 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000700 RDI: 0000000000000000
RBP: 0000000000000000 R08: ff16dcae79880200 R09: 0000000000000019
R10: 0000000000000001 R11: 0000000000001000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff16dcae6c670000
FS: 00007fcf428850c0(0000) GS:ff16dcb149710000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000000c CR3: 0000000121227005 CR4: 0000000000773ef0
PKRU: 55555554
Call Trace:
<TASK>
ice_vsi_cfg_rxq+0xca/0x460 [ice]
ice_vsi_cfg_rxqs+0x54/0x70 [ice]
ice_loopback_test+0xa9/0x520 [ice]
ice_self_test+0x1b9/0x280 [ice]
ethtool_self_test+0xe5/0x200
__dev_ethtool+0x1106/0x1a90
dev_ethtool+0xbe/0x1a0
dev_ioctl+0x258/0x4c0
sock_do_ioctl+0xe3/0x130
__x64_sys_ioctl+0xb9/0x100
do_syscall_64+0x7c/0x700
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
It crashes because we have not initialized libeth for the rx ring.
Fix it by treating ICE_VSI_LB VSIs slightly more like normal PF VSIs and
letting them have a q_vector. It's just a dummy, because the loopback
test does not use interrupts, but it contains a napi struct that can be
passed to libeth_rx_fq_create() called from ice_vsi_cfg_rxq() ->
ice_rxq_pp_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/efi: defer freeing of boot services memory
efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE
and EFI_BOOT_SERVICES_DATA using memblock_free_late().
There are two issue with that: memblock_free_late() should be used for
memory allocated with memblock_alloc() while the memory reserved with
memblock_reserve() should be freed with free_reserved_area().
More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
efi_free_boot_services() is called before deferred initialization of the
memory map is complete.
Benjamin Herrenschmidt reports that this causes a leak of ~140MB of
RAM on EC2 t3a.nano instances which only have 512MB or RAM.
If the freed memory resides in the areas that memory map for them is
still uninitialized, they won't be actually freed because
memblock_free_late() calls memblock_free_pages() and the latter skips
uninitialized pages.
Using free_reserved_area() at this point is also problematic because
__free_page() accesses the buddy of the freed page and that again might
end up in uninitialized part of the memory map.
Delaying the entire efi_free_boot_services() could be problematic
because in addition to freeing boot services memory it updates
efi.memmap without any synchronization and that's undesirable late in
boot when there is concurrency.
More robust approach is to only defer freeing of the EFI boot services
memory.
Split efi_free_boot_services() in two. First efi_unmap_boot_services()
collects ranges that should be freed into an array then
efi_free_boot_services() later frees them after deferred init is complete. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). |
