| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix out-of-bounds access in sysfs attribute read/write
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation. |
| A vulnerability has been identified in the wireless encryption handling of Wi-Fi transmissions. A malicious actor can generate shared-key authenticated transmissions containing targeted payloads while impersonating the identity of a primary BSSID.Successful exploitation allows for the delivery of tampered data to specific endpoints, bypassing standard cryptographic separation. |
| A vulnerability has been identified in a standardized wireless roaming protocol that could enable a malicious actor to install an attacker-controlled Group Temporal Key (GTK) on a client device. Successful exploitation of this vulnerability could allow a remote malicious actor to perform unauthorized frame injection, bypass client isolation, interfere with cross-client traffic, and compromise network segmentation, integrity, and confidentiality. |
| A technique has been identified that adapts a known port-stealing method to Wi-Fi environments that use multiple BSSIDs. By leveraging the relationship between BSSIDs and their associated virtual ports, an attacker could potentially bypass inter-BSSID isolation controls. Successful exploitation may enable an attacker to redirect and intercept the victim's network traffic, potentially resulting in eavesdropping, session hijacking, or denial of service. |
| A vulnerability in the packet processing logic may allow an authenticated attacker to craft and transmit a malicious Wi-Fi frame that causes an Access Point (AP) to classify the frame as group-addressed traffic and re-encrypt it using the Group Temporal Key (GTK) associated with the victim's BSSID. Successful exploitation may enable GTK-independent traffic injection and, when combined with a port-stealing technique, allows an attacker to redirect intercepted traffic to facilitate machine-in-the-middle (MitM) attacks across BSSID boundaries. |
| A vulnerability in the client isolation mechanism may allow an attacker to bypass Layer 2 (L2) communication restrictions between clients and redirect traffic at Layer 3 (L3). In addition to bypassing policy enforcement, successful exploitation - when combined with a port-stealing attack - may enable a bi-directional Machine-in-the-Middle (MitM) attack. |
| A vulnerability has been identified where an attacker connecting to an access point as a standard wired or wireless client can impersonate a gateway by leveraging an address-based spoofing technique. Successful exploitation enables the redirection of data streams, allowing for the interception or modification of traffic intended for the legitimate network gateway via a Machine-in-the-Middle (MitM) position. |
| Docker CLI for Windows searches for plugin binaries in C:\ProgramData\Docker\cli-plugins, a directory that does not exist by default. A low-privileged attacker can create this directory and place malicious CLI plugin binaries (docker-compose.exe, docker-buildx.exe, etc.) that are executed when a victim user opens Docker Desktop or invokes Docker CLI plugin features, and allow privilege-escalation if the docker CLI is executed as a privileged user.
This issue affects Docker CLI: through 29.1.5 and Windows binaries acting as a CLI-plugin manager using the github.com/docker/cli/cli-plugins/manager https://pkg.go.dev/github.com/docker/cli@v29.1.5+incompatible/cli-plugins/manager package, such as Docker Compose.
This issue does not impact non-Windows binaries, and projects not using the plugin-manager code. |
| Multer is a node.js middleware for handling `multipart/form-data`. A vulnerability in Multer prior to version 2.1.1 allows an attacker to trigger a Denial of Service (DoS) by sending malformed requests, potentially causing stack overflow. Users should upgrade to version 2.1.1 to receive a patch. No known workarounds are available. |
| Dell Device Management Agent (DDMA), versions prior to 26.02, contain an Improper Check for Unusual or Exceptional Conditions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of Service. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.
This vulnerability is due to incomplete parsing of the SSL handshake ingress packets. An attacker could exploit this vulnerability by sending crafted SSL handshake packets. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine restarts unexpectedly. |
| The /root/anaconda-ks.cfg installation configuration file in International Datacasting Corporation (IDC) SFX Series(SFX2100) SuperFlex Satellite Receiver insecurely stores the hardcoded root password hash. The password itself is highly insecure and susceptible to offline dictionary attacks using the rockyou.txt wordlist. Because direct root SSH login is disabled, an attacker must first obtain low-privileged access to the system (e.g., via other vulnerabilities) to be able to log in as the root user. The password is hardcoded and so allows for an actor with local access on effected versions to escalate to root |
| International Datacasting Corporation (IDC) SFX Series SuperFlex(SFX2100) SatelliteReceiver contains hardcoded and insecure credentials for the `admin` account. A remote unauthenticated attacker can use these undocumented credentials to access the satellite system directly via the Telnet service, leading to potential system compromise. |
| International Datacasting Corporation (IDC) SFX Series SuperFlex Satellite Receiver contains undocumented, hardcoded/insecure credentials for the `xd` user account. A remote unauthenticated attacker can log in via FTP using these credentials. Because the `xd` user has write permissions to their home directory where root-executed binaries and symlinks (such as those invoked by `xdstartstop`) are stored, the attacker can overwrite these files or manipulate symlinks to achieve arbitrary code execution as the root user. |
| International Datacasting Corporation (IDC)
SFX2100 Satellite Receiver, trivial password for the `user` (usr) account. A remote unauthenticated attacker can exploit this to gain unauthorized SSH access to the system, while intially dropped into a restricted shell, an attacker can trivially spawn a complete pty to gain an appropriately interactive shell. |
| International Datacasting Corporation (IDC) SFX Series SuperFlex SatelliteReceiver contains hardcoded credentials for the `monitor` account. A remote unauthenticated attacker can use these trivial, undocumented credentials to access the system via SSH. While initially dropped into a restricted shell, the attacker can trivially break out to achieve standard shell functionality. |
| An unauthenticated Remote Code Execution (RCE) vulnerability exists in the SNMP service of International Datacasting Corporation (IDC) SFX Series SuperFlex SatelliteReceiver. The deployment insecurely provisions the `private` SNMP community string with read/write access by default. Because the SNMP agent runs as root, an unauthenticated remote attacker can utilize `NET-SNMP-EXTEND-MIB` directives, abusing the fact that the system runs a vulnerable version of net-snmp pre 5.8, to execute arbitrary operating system commands with root privileges. |
| An OS Command Injection vulnerability exists in the web-based Traceroute diagnostic utility of International Datacasting Corporation (IDC) SFX Series SuperFlex SatelliteReceiver Web Management Interface version 101. An authenticated attacker can inject arbitrary shell metacharacters (such as the pipe `|` operator) into the flags parameter, leading to the execution of arbitrary operating system commands with root privileges. |
| The web-based Ping diagnostic utility (/IDC_Ping/main.cgi) in International Datacasting Corporation (IDC) SFX Series SuperFlex Satellite Receiver Web Management Interface version 101 is vulnerable to OS Command Injection. The application insecurely parses the `IPaddr` parameter. An authenticated attacker can bypass server-side semicolon exclusion checks by using alternate shell metacharacters (such as the pipe `|` operator) to append and execute arbitrary shell commands with root privileges. |
| A Reflected Cross-Site Scripting (XSS) vulnerability in the /IDC_Logging/index.cgi endpoint of International Datacasting Corporation (IDC) SFX Series SuperFlex SatelliteReceiver Web Management Interface version 101 allows a remote attacker to execute arbitrary web scripts or HTML. The vulnerability is triggered by sending a crafted payload through the `submitType` parameter, which is reflected directly into the DOM without proper escaping. |
