| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Authorization bypass through User-Controlled key vulnerability in HYPR Server allows Privilege Escalation.This issue affects Server: from 9.5.2 before 10.7.2. |
| Kiteworks is a private data network (PDN). In Kiteworks Secure Data Forms prior to version 9.2.1, a misconfiguration of the security attributes could potentially lead to Unprotected Transport of Credentials under certain circumstances. Upgrade Kiteworks to version 9.2.1 or later to receive a patch. |
| A maliciously crafted TIFF file can cause image decoding to attempt to allocate up 4GiB of memory, causing either excessive resource consumption or an out-of-memory error. |
| The installer of RATOC RAID Monitoring Manager for Windows allows to customize the installation folder. If the installation folder is customized to some non-default one, the folder may be left with un-secure ACLs and non-administrative users can alter contents of that folder. It may allow a non-administrative user to execute an arbitrary code with SYSTEM privilege. |
| n8n is an open source workflow automation platform. Prior to versions 2.4.0 and 1.121.0, when LDAP authentication is enabled, n8n automatically linked an LDAP identity to an existing local account if the LDAP email attribute matched the local account's email. An authenticated LDAP user who could control their own LDAP email attribute could set it to match another user's email — including an administrator's — and upon login gain full access to that account. The account linkage persisted even if the LDAP email was later reverted, resulting in a permanent account takeover. LDAP authentication must be configured and active (non-default). The issue has been fixed in n8n versions 2.4.0 and 1.121.0. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Disable LDAP authentication until the instance can be upgraded, restrict LDAP directory permissions so that users cannot modify their own email attributes, and/or audit existing LDAP-linked accounts for unexpected account associations. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to version 2.8.0, when the `N8N_SKIP_AUTH_ON_OAUTH_CALLBACK` environment variable is set to `true`, the OAuth callback handler skips ownership verification of the OAuth state parameter. This allows an attacker to trick a victim into completing an OAuth flow against a credential object the attacker controls, causing the victim's OAuth tokens to be stored in the attacker's credential. The attacker can then use those tokens to execute workflows in their name. This issue only affects instances where `N8N_SKIP_AUTH_ON_OAUTH_CALLBACK=true` is explicitly configured (non-default). The issue has been fixed in n8n version 2.8.0. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Avoid enabling `N8N_SKIP_AUTH_ON_OAUTH_CALLBACK=true` unless strictly required, and/ or restrict access to the n8n instance to fully trusted users only. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to version 2.5.0, when the Source Control feature is configured to use SSH, the SSH command used for git operations explicitly disabled host key verification. A network attacker positioned between the n8n instance and the remote Git server could intercept the connection and present a fraudulent host key, potentially injecting malicious content into workflows or intercepting repository data. This issue only affects instances where the Source Control feature has been explicitly enabled and configured to use SSH (non-default). The issue has been fixed in n8n version 2.5.0. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Disable the Source Control feature if it is not actively required, and/or restrict network access to ensure the n8n instance communicates with the Git server only over trusted, controlled network paths. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| fontconfig before 2.17.1 has an off-by-one error in allocation during sfnt capability handling, leading to a one-byte out-of-bounds write, and potentially a crash or code execution. This is in FcFontCapabilities in fcfreetype.c. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.10 before 18.8.7, 18.9 before 18.9.3, and 18.10 before 18.10.1 that could have allowed an unauthenticated user to execute arbitrary GraphQL mutations on behalf of authenticated users due to insufficient CSRF protection. |
| n8n is an open source workflow automation platform. Prior to versions 2.14.1, 2.13.3, and 1.123.27, an authenticated user with permission to create or modify workflows could exploit a prototype pollution vulnerability in the XML and the GSuiteAdmin nodes. By supplying a crafted parameters as part of node configuration, an attacker could write attacker-controlled values onto `Object.prototype`. An attacker could use this prototype pollution to achieve remote code execution on the n8n instance. The issue has been fixed in n8n versions 2.14.1, 2.13.3, and 1.123.27. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or disable the XML node by adding `n8n-nodes-base.xml` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.14.1, 2.13.3, and 1.123.26, an authenticated user with permission to create or modify workflows could exploit a SQL injection vulnerability in the Data Table Get node. On default SQLite DB, single statements can be manipulated and the attack surface is practically limited. On PostgreSQL deployments, multi-statement execution is possible, enabling data modification and deletion. The issue has been fixed in n8n versions 1.123.26, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, disable the Data Table node by adding `n8n-nodes-base.dataTable` to the `NODES_EXCLUDE` environment variable, and/or review existing workflows for Data Table Get nodes where `orderByColumn` is set to an expression that incorporates external or user-supplied input. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform a carriage return line feed (CRLF) injection attack against a user.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to arbitrarily inject log entries, manipulate the structure of log files, or obscure legitimate log events. |
| A vulnerability in Cisco IOS XE Software for Cisco Meraki could allow a remote, unauthenticated attacker to view confidential device information.
This vulnerability is due to a device configuration upload being performed over an insecure tunnel. An attacker could exploit this vulnerability by conducting an on-path attack between the affected device and the Cisco Meraki Dashboard. A successful exploit could allow the attacker to view sensitive device configuration information. |
| LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to version 10.25.1, LiquidJS's `memoryLimit` security mechanism can be completely bypassed by using reverse range expressions (e.g., `(100000000..1)`), allowing an attacker to allocate unlimited memory. Combined with a string flattening operation (e.g., `replace` filter), this causes a V8 Fatal error that crashes the Node.js process, resulting in complete denial of service from a single HTTP request. Version 10.25.1 patches the issue. |
| n8n is an open source workflow automation platform. Prior to versions 2.14.1, 2.13.3, and 1.123.26, an authenticated user with permission to create or modify workflows could use the Merge node's "Combine by SQL" mode to read local files on the n8n host and achieve remote code execution. The AlaSQL sandbox did not sufficiently restrict certain SQL statements, allowing an attacker to access sensitive files on the server or even compromise the instance. The issue has been fixed in n8n versions 2.14.1, 2.13.3, and 1.123.26. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Merge node by adding `n8n-nodes-base.merge` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| Directory Traversal vulnerability in the extractFile method of org.codehaus.plexus.util.Expand in plexus-utils before 6d780b3378829318ba5c2d29547e0012d5b29642. This allows an attacker to execute arbitrary code |
| n8n is an open source workflow automation platform. Prior to versions 1.123.27, 2.13.3, and 2.14.1, an authenticated user with permission to create or modify workflows could craft a workflow that produces an HTML binary data object without a filename. The `/rest/binary-data` endpoint served such responses inline on the n8n origin without `Content-Disposition` or `Content-Security-Policy` headers, allowing the HTML to render in the browser with full same-origin JavaScript access. By sending the resulting URL to a higher-privileged user, an attacker could execute JavaScript in the victim's authenticated session, enabling exfiltration of workflows and credentials, modification of workflows, or privilege escalation to admin. The issue has been fixed in n8n versions 1.123.27, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or restrict network access to the n8n instance to prevent untrusted users from accessing binary data URLs. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.27, 2.13.3, and 2.14.1, a flaw in the LDAP node's filter escape logic allowed LDAP metacharacters to pass through unescaped when user-controlled input was interpolated into LDAP search filters. In workflows where external user input is passed via expressions into the LDAP node's search parameters, an attacker could manipulate the constructed filter to retrieve unintended LDAP records or bypass authentication checks implemented in the workflow. Exploitation requires a specific workflow configuration. The LDAP node must be used with user-controlled input passed via expressions (e.g., from a form or webhook). The issue has been fixed in n8n versions 1.123.27, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, disable the LDAP node by adding `n8n-nodes-base.ldap` to the `NODES_EXCLUDE` environment variable, and/or avoid passing unvalidated external user input into LDAP node search parameters via expressions. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| Digital Photo Frame GH-WDF10A provided by GREEN HOUSE CO., LTD. contains an active debug code vulnerability. If this vulnerability is exploited, files or configurations on the affected device may be read or written, or arbitrary files may be executed with root privileges. |
