| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A tampering vulnerability in the CylanceOPTICS Windows Installer Package of CylanceOPTICS for Windows version 3.2 and 3.3 could allow an attacker to potentially uninstall CylanceOPTICS from a system thereby leaving it with only the protection of CylancePROTECT. |
| In Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0, the WriteAcl function deletes all existing ACL entries first, and then attempts to recreate them based on user input. If input validation fails during decoding, the process stops, and no entries are restored by access-control-server.cpp, i.e., a denial of service. |
| The salt.auth.pki module does not properly authenticate callers. The "password" field contains a public certificate which is validated against a CA certificate by the module. This is not pki authentication, as the caller does not need access to the corresponding private key for the authentication attempt to be accepted. |
| Incorrect access control in BECN DATAGERRY v2.2 allows attackers to execute arbitrary commands via crafted web requests. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| An improper access control vulnerability may allow privilege escalation.This issue affects:
* ELI 380 Resting Electrocardiograph:
Versions 2.6.0 and prior;
* ELI 280/BUR280/MLBUR 280 Resting Electrocardiograph:
Versions 2.3.1 and prior;
* ELI 250c/BUR 250c Resting Electrocardiograph: Versions 2.1.2 and prior;
* ELI 150c/BUR 150c/MLBUR 150c Resting Electrocardiograph:
Versions 2.2.0 and prior. |
| In Spring Security, versions 5.7.x prior to 5.7.12, 5.8.x prior to
5.8.11, versions 6.0.x prior to 6.0.9, versions 6.1.x prior to 6.1.8,
versions 6.2.x prior to 6.2.3, an application is possible vulnerable to
broken access control when it directly uses the AuthenticatedVoter#vote passing a null Authentication parameter. |
| A vulnerability has been identified in SCALANCE WAB762-1 (6GK5762-1AJ00-6AA0) (All versions < V3.0.0), SCALANCE WAM763-1 (6GK5763-1AL00-7DA0) (All versions < V3.0.0), SCALANCE WAM763-1 (ME) (6GK5763-1AL00-7DC0) (All versions < V3.0.0), SCALANCE WAM763-1 (US) (6GK5763-1AL00-7DB0) (All versions < V3.0.0), SCALANCE WAM766-1 (6GK5766-1GE00-7DA0) (All versions < V3.0.0), SCALANCE WAM766-1 (ME) (6GK5766-1GE00-7DC0) (All versions < V3.0.0), SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (6GK5766-1GE00-7TA0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (ME) (6GK5766-1GE00-7TC0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0) (All versions < V3.0.0), SCALANCE WUB762-1 (6GK5762-1AJ00-1AA0) (All versions < V3.0.0), SCALANCE WUB762-1 iFeatures (6GK5762-1AJ00-2AA0) (All versions < V3.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3AA0) (All versions < V3.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3DA0) (All versions < V3.0.0), SCALANCE WUM763-1 (US) (6GK5763-1AL00-3AB0) (All versions < V3.0.0), SCALANCE WUM763-1 (US) (6GK5763-1AL00-3DB0) (All versions < V3.0.0), SCALANCE WUM766-1 (6GK5766-1GE00-3DA0) (All versions < V3.0.0), SCALANCE WUM766-1 (ME) (6GK5766-1GE00-3DC0) (All versions < V3.0.0), SCALANCE WUM766-1 (USA) (6GK5766-1GE00-3DB0) (All versions < V3.0.0). Affected devices with role `user` is affected by incorrect authorization in SNMPv3 View configuration. This could allow an attacker to change the View Type of SNMPv3 Views. |
| An issue in the permission verification module and organization/application editing interface in Casdoor v2.26.0 and before, and fixed in v.2.63.0, allows remote authenticated administrators of any organization within the system to bypass the system's permission verification mechanism by directly concatenating URLs after login |
| A vulnerability, which was classified as problematic, has been found in Eastnets PaymentSafe 2.5.26.0. Affected by this issue is some unknown functionality of the file /Default.aspx of the component URL Handler. The manipulation leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.5.27.0 is able to address this issue. |
| matrix-appservice-irc is a Node.js IRC bridge for the Matrix messaging protocol. The fix for GHSA-wm4w-7h2q-3pf7 / CVE-2024-32000 included in matrix-appservice-irc 2.0.0 relied on the Matrix homeserver-provided timestamp to determine whether a user has access to the event they're replying to when determining whether or not to include a truncated version of the original event in the IRC message. Since this value is controlled by external entities, a malicious Matrix homeserver joined to a room in which a matrix-appservice-irc bridge instance (before version 2.0.1) is present can fabricate the timestamp with the intent of tricking the bridge into leaking room messages the homeserver should not have access to. matrix-appservice-irc 2.0.1 drops the reliance on `origin_server_ts` when determining whether or not an event should be visible to a user, instead tracking the event timestamps internally. As a workaround, it's possible to limit the amount of information leaked by setting a reply template that doesn't contain the original message. |
| Incorrect access control in the REST API endpoint of HubSpot v1.29441 allows unauthenticated attackers to view users' data without proper authorization. |
| An issue was discovered in mcp-neo4j 0.3.0 allowing attackers to obtain sensitive information or execute arbitrary commands via the SSE service. NOTE: the Supplier's position is that authentication is not mandatory for MCP servers, and the mcp-neo4j MCP server is only intended for use in a local environment where authentication realistically would not be needed. Also, the Supplier provides middleware to help isolate the MCP server from external access (if needed). |
| Aztech DSL5005EN firmware 1.00.AZ_2013-05-10 and possibly other versions allows unauthenticated attackers to change the administrator password via a crafted POST request to sysAccess.asp. This allows full administrative control of the router without authentication. |
| An Authentication Bypass vulnerability on UniFi Protect Application with Auto-Adopt Bridge Devices enabled could allow a malicious actor with access to UniFi Protect Cameras adjacent network to take control of UniFi Protect Cameras. |
| The WPCOM Member plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.7.5. This is due to insufficient verification on the 'user_phone' parameter when logging in. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if SMS login is enabled. |
| If LDAP settings are accessed, authentication could be redirected to another server, potentially exposing credentials. This requires admin access and an active LDAP setup. |
| A vulnerability was found in Yue Lao Blind Box 月老盲盒 up to 4.0. It has been declared as critical. This vulnerability affects the function base64image of the file /app/controller/Upload.php. The manipulation of the argument data leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Improper access control for some Intel(R) CST software before version 2.1.10300 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Affected Vertiv products do not properly protect webserver functions that could allow an attacker to bypass authentication. |
