| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Permission control vulnerability in the network module. Successful exploitation of this vulnerability may affect service confidentiality. |
| Denial of service (DoS) vulnerability in the office service. Successful exploitation of this vulnerability may affect availability. |
| Denial of service (DoS) vulnerability in the office service. Successful exploitation of this vulnerability may affect availability. |
| Denial of service (DoS) vulnerability in the office service. Successful exploitation of this vulnerability may affect availability. |
| Denial of service (DoS) vulnerability in the office service. Successful exploitation of this vulnerability may affect availability. |
| Splashin iOS v2.0 fails to enforce server-side interval restrictions for location updates for free-tier users. |
| An issue found in ProcessWire 3.0.210 allows attackers to execute arbitrary code and install a reverse shell via the download_zip_url parameter when installing a new module. NOTE: this is disputed because exploitation requires that the attacker is able to enter requests as an admin; however, a ProcessWire admin is intentionally allowed to install any module that contains any arbitrary code. |
| Meshtastic is an open source mesh networking solution. Prior to v2.6.3, an attacker can send NodeInfo with a empty publicKey first, then overwrite it with a new key. First sending a empty key bypasses 'if (p.public_key.size > 0) {', clearing the existing publicKey (and resetting the size to 0) for a known node. Then a new key bypasses 'if (info->user.public_key.size > 0) {', and this malicious key is stored in NodeDB. This vulnerability is fixed in 2.6.3. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix fault on fd close after unbind
If userspace holds an fd open, unbinds the device and then closes it,
the driver shouldn't try to access the hardware. Protect it by using
drm_dev_enter()/drm_dev_exit(). This fixes the following page fault:
<6> [IGT] xe_wedged: exiting, ret=98
<1> BUG: unable to handle page fault for address: ffffc901bc5e508c
<1> #PF: supervisor read access in kernel mode
<1> #PF: error_code(0x0000) - not-present page
...
<4> xe_lrc_update_timestamp+0x1c/0xd0 [xe]
<4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe]
<4> xe_exec_queue_fini+0x16/0xb0 [xe]
<4> __guc_exec_queue_fini_async+0xc4/0x190 [xe]
<4> guc_exec_queue_fini_async+0xa0/0xe0 [xe]
<4> guc_exec_queue_fini+0x23/0x40 [xe]
<4> xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> xe_file_close+0xd4/0x1a0 [xe]
<4> drm_file_free+0x210/0x280 [drm]
<4> drm_close_helper.isra.0+0x6d/0x80 [drm]
<4> drm_release_noglobal+0x20/0x90 [drm]
(cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof_sdw: Add space for a terminator into DAIs array
The code uses the initialised member of the asoc_sdw_dailink struct to
determine if a member of the array is in use. However in the case the
array is completely full this will lead to an access 1 past the end of
the array, expand the array by one entry to include a space for a
terminator. |
| Windows Kernel Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix invalid irq restore in scx_ops_bypass()
While adding outer irqsave/restore locking, 0e7ffff1b811 ("scx: Fix raciness
in scx_ops_bypass()") forgot to convert an inner rq_unlock_irqrestore() to
rq_unlock() which could re-enable IRQ prematurely leading to the following
warning:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 96 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40
...
Sched_ext: create_dsq (enabling)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : warn_bogus_irq_restore+0x30/0x40
lr : warn_bogus_irq_restore+0x30/0x40
...
Call trace:
warn_bogus_irq_restore+0x30/0x40 (P)
warn_bogus_irq_restore+0x30/0x40 (L)
scx_ops_bypass+0x224/0x3b8
scx_ops_enable.isra.0+0x2c8/0xaa8
bpf_scx_reg+0x18/0x30
...
irq event stamp: 33739
hardirqs last enabled at (33739): [<ffff8000800b699c>] scx_ops_bypass+0x174/0x3b8
hardirqs last disabled at (33738): [<ffff800080d48ad4>] _raw_spin_lock_irqsave+0xb4/0xd8
Drop the stray _irqrestore(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP
The linkDMA should not be released on stop trigger since a stream re-start
might happen without closing of the stream. This leaves a short time for
other streams to 'steal' the linkDMA since it has been released.
This issue is not easy to reproduce under normal conditions as usually
after stop the stream is closed, or the same stream is restarted, but if
another stream got in between the stop and start, like this:
aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120
CTRL+z
aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120
then the link DMA channels will be mixed up, resulting firmware error or
crash. |
| NVIDIA Riva contains a vulnerability where a user could cause an improper access control issue. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, denial of service, or information disclosure. |
| NVIDIA Riva contains a vulnerability where a user could cause an improper access control issue. A successful exploit of this vulnerability might lead to data tampering or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix kernel async DIO
Netfslib needs to be able to handle kernel-initiated asynchronous DIO that
is supplied with a bio_vec[] array. Currently, because of the async flag,
this gets passed to netfs_extract_user_iter() which throws a warning and
fails because it only handles IOVEC and UBUF iterators. This can be
triggered through a combination of cifs and a loopback blockdev with
something like:
mount //my/cifs/share /foo
dd if=/dev/zero of=/foo/m0 bs=4K count=1K
losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0
echo hello >/dev/loop2046
This causes the following to appear in syslog:
WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs]
and the write to fail.
Fix this by removing the check in netfs_unbuffered_write_iter_locked() that
causes async kernel DIO writes to be handled as userspace writes. Note
that this change relies on the kernel caller maintaining the existence of
the bio_vec array (or kvec[] or folio_queue) until the op is complete. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: memalloc: prefer dma_mapping_error() over explicit address checking
With CONFIG_DMA_API_DEBUG enabled, the following warning is observed:
DMA-API: snd_hda_intel 0000:03:00.1: device driver failed to check map error[device address=0x00000000ffff0000] [size=20480 bytes] [mapped as single]
WARNING: CPU: 28 PID: 2255 at kernel/dma/debug.c:1036 check_unmap+0x1408/0x2430
CPU: 28 UID: 42 PID: 2255 Comm: wireplumber Tainted: G W L 6.12.0-10-133577cad6bf48e5a7848c4338124081393bfe8a+ #759
debug_dma_unmap_page+0xe9/0xf0
snd_dma_wc_free+0x85/0x130 [snd_pcm]
snd_pcm_lib_free_pages+0x1e3/0x440 [snd_pcm]
snd_pcm_common_ioctl+0x1c9a/0x2960 [snd_pcm]
snd_pcm_ioctl+0x6a/0xc0 [snd_pcm]
...
Check for returned DMA addresses using specialized dma_mapping_error()
helper which is generally recommended for this purpose by
Documentation/core-api/dma-api.rst. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix general protection fault in ivpu_bo_list()
Check if ctx is not NULL before accessing its fields. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix IPIs usage in kfence_protect_page()
flush_tlb_kernel_range() may use IPIs to flush the TLBs of all the
cores, which triggers the following warning when the irqs are disabled:
[ 3.455330] WARNING: CPU: 1 PID: 0 at kernel/smp.c:815 smp_call_function_many_cond+0x452/0x520
[ 3.456647] Modules linked in:
[ 3.457218] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7-00010-g91d3de7240b8 #1
[ 3.457416] Hardware name: QEMU QEMU Virtual Machine, BIOS
[ 3.457633] epc : smp_call_function_many_cond+0x452/0x520
[ 3.457736] ra : on_each_cpu_cond_mask+0x1e/0x30
[ 3.457786] epc : ffffffff800b669a ra : ffffffff800b67c2 sp : ff2000000000bb50
[ 3.457824] gp : ffffffff815212b8 tp : ff6000008014f080 t0 : 000000000000003f
[ 3.457859] t1 : ffffffff815221e0 t2 : 000000000000000f s0 : ff2000000000bc10
[ 3.457920] s1 : 0000000000000040 a0 : ffffffff815221e0 a1 : 0000000000000001
[ 3.457953] a2 : 0000000000010000 a3 : 0000000000000003 a4 : 0000000000000000
[ 3.458006] a5 : 0000000000000000 a6 : ffffffffffffffff a7 : 0000000000000000
[ 3.458042] s2 : ffffffff815223be s3 : 00fffffffffff000 s4 : ff600001ffe38fc0
[ 3.458076] s5 : ff600001ff950d00 s6 : 0000000200000120 s7 : 0000000000000001
[ 3.458109] s8 : 0000000000000001 s9 : ff60000080841ef0 s10: 0000000000000001
[ 3.458141] s11: ffffffff81524812 t3 : 0000000000000001 t4 : ff60000080092bc0
[ 3.458172] t5 : 0000000000000000 t6 : ff200000000236d0
[ 3.458203] status: 0000000200000100 badaddr: ffffffff800b669a cause: 0000000000000003
[ 3.458373] [<ffffffff800b669a>] smp_call_function_many_cond+0x452/0x520
[ 3.458593] [<ffffffff800b67c2>] on_each_cpu_cond_mask+0x1e/0x30
[ 3.458625] [<ffffffff8000e4ca>] __flush_tlb_range+0x118/0x1ca
[ 3.458656] [<ffffffff8000e6b2>] flush_tlb_kernel_range+0x1e/0x26
[ 3.458683] [<ffffffff801ea56a>] kfence_protect+0xc0/0xce
[ 3.458717] [<ffffffff801e9456>] kfence_guarded_free+0xc6/0x1c0
[ 3.458742] [<ffffffff801e9d6c>] __kfence_free+0x62/0xc6
[ 3.458764] [<ffffffff801c57d8>] kfree+0x106/0x32c
[ 3.458786] [<ffffffff80588cf2>] detach_buf_split+0x188/0x1a8
[ 3.458816] [<ffffffff8058708c>] virtqueue_get_buf_ctx+0xb6/0x1f6
[ 3.458839] [<ffffffff805871da>] virtqueue_get_buf+0xe/0x16
[ 3.458880] [<ffffffff80613d6a>] virtblk_done+0x5c/0xe2
[ 3.458908] [<ffffffff8058766e>] vring_interrupt+0x6a/0x74
[ 3.458930] [<ffffffff800747d8>] __handle_irq_event_percpu+0x7c/0xe2
[ 3.458956] [<ffffffff800748f0>] handle_irq_event+0x3c/0x86
[ 3.458978] [<ffffffff800786cc>] handle_simple_irq+0x9e/0xbe
[ 3.459004] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a
[ 3.459027] [<ffffffff804bf87c>] imsic_handle_irq+0xba/0x120
[ 3.459056] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a
[ 3.459080] [<ffffffff804bdb76>] riscv_intc_aia_irq+0x24/0x34
[ 3.459103] [<ffffffff809d0452>] handle_riscv_irq+0x2e/0x4c
[ 3.459133] [<ffffffff809d923e>] call_on_irq_stack+0x32/0x40
So only flush the local TLB and let the lazy kfence page fault handling
deal with the faults which could happen when a core has an old protected
pte version cached in its TLB. That leads to potential inaccuracies which
can be tolerated when using kfence. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: axp20x: AXP717: set ramp_delay
AXP717 datasheet says that regulator ramp delay is 15.625 us/step,
which is 10mV in our case.
Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to
expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0
For DCDC4, steps is 100mv
Add a AXP_DESC_DELAY macro and update AXP_DESC macro to
expand to AXP_DESC_DELAY with ramp_delay = 0
This patch fix crashes when using CPU DVFS. |
