| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Signed to Unsigned Conversion Error and Out-of-bounds Write vulnerability in Erlang OTP erts allows an attacker who can supply a crafted Erlang external term format (ETF) binary to binary_to_term/1 to corrupt the BEAM heap pointer and crash the virtual machine.
When decoding a LARGE_TUPLE_EXT term, the validation pass decoded_size() in erts/emulator/beam/external.c reads the 32-bit arity field as unsigned (get_uint32()), while the decode pass dec_term() reads the same field as a signed 32-bit integer (get_int32()) into an int. An arity wire value of 0x80000000 passes validation as 2147483648 but decodes as -2147483648, so the subsequent hp += n moves the heap allocation pointer backward. Neither pass enforces the runtime tuple-arity limit MAX_ARITYVAL. The result is an out-of-bounds heap write; in practice the VM detects an impossible heap size and aborts, denying service. The required padding is large when uncompressed but the compressed-ETF envelope shrinks it to a small payload on the wire.
This issue affects OTP from OTP 25.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to erts from 13.0 before 17.0.4, 16.4.0.4 and 15.2.7.11. |
| Honeywell S35 Series 3M/5M/8M/PinHole Cameras, all versions prior to and including version HC5.26.1.14.20260207 contains an audit log disclosure Vulnerability that could allow an attacker to access audit logs without authentication, potentially resulting in the disclosure of sensitive information. Honeywell recommends updating to the latest available version (HC5.26.1.16.20260207) once available. |
| A Server-Side Request Forgery (SSRF) and credential exfiltration vulnerability exists in the cloud-healthcare-fhir-fetch-page tool of googleapis/mcp-toolbox.
The tool takes an unvalidated pageURL parameter from the client and issues an HTTP GET request to it using an authenticated client. The underlying transport automatically attaches an Authorization: Bearer header to every outbound request regardless of the destination host. An attacker can supply an arbitrary external URL to the pageURL parameter (either directly via the tool execution payload or implicitly via data-driven pagination tracking loops), leading Toolbox into sending its OAuth/service-account access token to an attacker-controlled listener. Depending on the configuration, this leaks either the end-user's token or the broader service-account access token (ADC), potentially exposing Protected Health Information (PHI) and secondary Google Cloud Platform services. |
| A flaw was found in the Event-Driven Ansible (EDA) server. The ExternalEventStreamViewSet uses permissive access controls (permission_classes=[AllowAny], authentication_classes=[]) and relies solely on the Subject HTTP header value for mTLS authentication without verifying that the header originated from a trusted proxy. Additionally, the expected certificate Distinguished Name is leaked in the 403 error response body. An attacker who can reach the EDA API endpoint with a spoofed Subject header can inject arbitrary events into mTLS-protected event streams, triggering downstream automation actions. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache Wicket.
This issue affects Apache Wicket: from 9.0.0 through 9.23.0, from 10.0.0 through 10.9.0.
Users are recommended to upgrade to version 10.10.0, which fixes the issue. |
| Next.js is a React framework for building full-stack web applications. In versions 12.0.0 through 15.5.20 and 16.0.0 through 16.2.10, a server-side fetch with a request body may return a cached response body from a different request to the same URL but different body. Confidential data in the POST's response body would then leak to unauthorized requests. Though the request itself will not be deduped. This is only an issue when receiving request bodies with a content type charset other than UTF-8. For example, the UTF-16 byte sequences for 삃삃 and 섄섄 in the request body would share the same cache. This issue has been fixed in versions 15.5.21 and 16.2.11. |
| A flaw was found in the file-icns plugin in GIMP. When applying a decompressed mask during ICNS image processing, the plugin reads from the mask data buffer without verifying if the cursor exceeds the allocated resource size. If a crafted file contains a truncated mask resource, the icns_decompress function continues reading past the bounds of the buffer. This out-of-bounds read vulnerability results in information disclosure of heap contents, where memory contents are leaked as alpha channel pixel values, or a crash leading to a denial of service if unmapped memory is accessed. |
| Next.js is a React framework for building full-stack web applications. In versions 12.0.0 through 15.5.20 and 16.0.0 through 16.2.10, a server-side fetch with a request body may return a cached response body from a different request to the same URL but different body. Confidential data in the POST's response body would then leak to unauthorized requests. Though the request itself will not be deduped. This only applies to fetch calls with a request that has a different init than the one passed to fetch. A safe request would be: fetch(new Request(init), init). An unsafe request would be: fetch(new Request(init), aDifferentInit). This issue has been fixed in versions 15.5.21 and 16.2.11. |
| A flaw was found in the file-fits plugin in GIMP. When processing a FITS image file, the plugin calculates memory allocation sizes using signed 32-bit integers for width and height. If a crafted file sets both values to large values, their product exceeds 2^31 and overflows, resulting in an undersized heap-based buffer allocation. This integer overflow issue results in a heap-based buffer overflow when cfitsio subsequently writes a full row of pixels in the buffer, causing memory corruption, potentially leading to arbitrary code execution or a denial of service. |
| Ekushey Project Manager CRM through version 5.0 contains a stored cross-site scripting vulnerability that allows authenticated client users to inject arbitrary HTML and JavaScript by entering malicious payloads into the Reply Ticket field. Attackers can craft and store malicious scripts that execute in the browser sessions of Staff or Administrator users who view the Support Ticket detail page. |
| In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.
As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.
An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.
The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked. |
| facil.io 0.6.0 through 0.7.6 contains an integer underflow vulnerability in the multipart MIME body parser that allows unauthenticated remote attackers to crash the server process by sending a crafted Content-Disposition header with an empty field name. Attackers can trigger a uint32_t wraparound in http_mime_parser.h causing an out-of-bounds memory read past the name pointer, resulting in a bus fault that crashes the handling worker with a single POST request. |
| Pheditor is a single-file editor and file manager written in PHP. From version 2.0.1 to before version 2.0.6, Pheditor ships with a hardcoded default password admin (SHA-512 hash stored at pheditor.php:11). There is no mechanism to force a password change on first login. Any deployment using the default credentials grants an attacker full access to the file editor, file upload, and terminal features, enabling arbitrary file read/write and remote code execution. This issue has been patched in version 2.0.6. |
| schreibfaul1 ESP32-audioI2S 3.4.5 has a buffer overflow vulnerability in UnpackFrameHeader(). Multiple attacker-controlled index parameters are used to access static and heap table arrays without range limitation. Invalid index values lead to out-of-bounds memory writing and heap buffer overflow. |
| Pheditor is a single-file editor and file manager written in PHP. From version 2.0.1 to before version 2.0.4, an OS Command Injection vulnerability in the terminal action handler allows any authenticated user to execute arbitrary OS commands by injecting shell metacharacters into the 'dir' POST parameter, completely bypassing the TERMINAL_COMMANDS whitelist and achieving full Remote Code Execution with web server privileges. This issue has been patched in version 2.0.4. |
| Pheditor is a single-file editor and file manager written in PHP. Prior to version 2.0.5, there is an authenticated terminal command whitelist bypass. The terminal feature checks whether the submitted command starts with one of the configured TERMINAL_COMMANDS values, then passes the full command string to shell_exec(). Shell command substitution such as $() is not blocked, so an authenticated user with the terminal permission can bypass a restricted command allowlist and execute arbitrary shell commands as the web server user. This issue has been patched in version 2.0.5. |
| Classic buffer overflow in the Erlang/OTP megaco flex scanner C driver allows a remote unauthenticated attacker to corrupt the driver's memory (and potentially achieve remote code execution or a denial-of-service crash) by sending a single text-encoded H.248/Megaco message containing an oversized property parm name.
When tokenizing a Local/Remote descriptor, mfs_load_property_groups extracts the attacker-controlled property name (bounded only by the message length) and, when no value follows, formats it into a fixed 512-byte error_msg field of the MfsErlDrvData struct using an unchecked sprintf call. Names longer than roughly 452 bytes overflow into the immediately following struct fields (text_buf, text_ptr, term_spec, term_spec_size, term_spec_index), overwriting live pointers and counters with attacker-chosen bytes. Subsequent scanner code writes and frees through the corrupted pointers, producing arbitrary write and arbitrary free primitives inside the BEAM VM process, which can be leveraged for remote code execution. On builds compiled with _FORTIFY_SOURCE the overflow is detected at runtime and terminates the process with SIGABRT, resulting in denial of service.
The overflow occurs in the flex scanner before any grammar or Megaco-level authentication processing, so exploitation requires only network reachability to the megaco transport port on a node configured with {scanner, flex}.
This vulnerability is associated with program files lib/megaco/src/flex/megaco_flex_scanner_drv.flex.src and program routines mfs_load_property_groups.
This issue affects OTP from OTP 17.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to megaco from 3.17.1 before 4.9.1, 4.8.3.1 and 4.7.2.2. Versions prior to OTP 17.0 are also affected but are not listed because the OTP version scheme is only defined from OTP 17.0 onwards. |
| Stored Cross-site Scripting (CWE-79) in the email module in Roskus Prospero Flow CRM before 5.4.4 allows a remote, authenticated low-privileged user to execute arbitrary JavaScript in another user's browser, including administrators, leading to session compromise and account takeover, via a payload stored in an email body that is persisted without sanitization and rendered unescaped with {!! $email->body !!} when the recipient opens the message. |
| HAProxy Community Edition 3.0 through 3.3 before 3.3.3 lacks a length check for the NEW_TOKEN format. HAProxy Enterprise and ALOHA are also affected. |
| Mettle SendPortal 3.0.1 and earlier contains a stored cross-site scripting (XSS) vulnerability in the template management functionality. The application fails to properly sanitize user-supplied input in the content parameter of the /templates endpoint, allowing an attacker to persistently inject malicious JavaScript code that is executed in the browsers of users who access the affected template. |
