| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
blk_iocost: fix more out of bound shifts
Recently running UBSAN caught few out of bound shifts in the
ioc_forgive_debts() function:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
Call Trace:
<IRQ>
dump_stack_lvl+0xca/0x130
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
? __lock_acquire+0x6441/0x7c10
ioc_timer_fn+0x6cec/0x7750
? blk_iocost_init+0x720/0x720
? call_timer_fn+0x5d/0x470
call_timer_fn+0xfa/0x470
? blk_iocost_init+0x720/0x720
__run_timer_base+0x519/0x700
...
Actual impact of this issue was not identified but I propose to fix the
undefined behaviour.
The proposed fix to prevent those out of bound shifts consist of
precalculating exponent before using it the shift operations by taking
min value from the actual exponent and maximum possible number of bits. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null check for top_pipe_to_program in commit_planes_for_stream
This commit addresses a null pointer dereference issue in the
`commit_planes_for_stream` function at line 4140. The issue could occur
when `top_pipe_to_program` is null.
The fix adds a check to ensure `top_pipe_to_program` is not null before
accessing its stream_res. This prevents a null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Handle null 'stream_status' in 'planes_changed_for_existing_stream'
This commit adds a null check for 'stream_status' in the function
'planes_changed_for_existing_stream'. Previously, the code assumed
'stream_status' could be null, but did not handle the case where it was
actually null. This could lead to a null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointers before using dc->clk_mgr
[WHY & HOW]
dc->clk_mgr is null checked previously in the same function, indicating
it might be null.
Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which
dereferences null "dc->clk_mgr". (The function pointer resolves to
"dcn35_apply_idle_power_optimizations".)
This fixes 1 FORWARD_NULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null check for 'afb' in amdgpu_dm_plane_handle_cursor_update (v2)
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check stream before comparing them
[WHAT & HOW]
amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is
necessary to check for null before dereferencing them.
This fixes 1 FORWARD_NULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation
This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30
color management module. The issue could occur when the index 'i'
exceeds the number of transfer function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 19.503784] page dumped because: k
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: update orig_path in ext4_find_extent()
In ext4_find_extent(), if the path is not big enough, we free it and set
*orig_path to NULL. But after reallocating and successfully initializing
the path, we don't update *orig_path, in which case the caller gets a
valid path but a NULL ppath, and this may cause a NULL pointer dereference
or a path memory leak. For example:
ext4_split_extent
path = *ppath = 2000
ext4_find_extent
if (depth > path[0].p_maxdepth)
kfree(path = 2000);
*orig_path = path = NULL;
path = kcalloc() = 3000
ext4_split_extent_at(*ppath = NULL)
path = *ppath;
ex = path[depth].p_ext;
// NULL pointer dereference!
==================================================================
BUG: kernel NULL pointer dereference, address: 0000000000000010
CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847
RIP: 0010:ext4_split_extent_at+0x6d/0x560
Call Trace:
<TASK>
ext4_split_extent.isra.0+0xcb/0x1b0
ext4_ext_convert_to_initialized+0x168/0x6c0
ext4_ext_handle_unwritten_extents+0x325/0x4d0
ext4_ext_map_blocks+0x520/0xdb0
ext4_map_blocks+0x2b0/0x690
ext4_iomap_begin+0x20e/0x2c0
[...]
==================================================================
Therefore, *orig_path is updated when the extent lookup succeeds, so that
the caller can safely use path or *ppath. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: omapdrm: Add missing check for alloc_ordered_workqueue
As it may return NULL pointer and cause NULL pointer dereference. Add check
for the return value of alloc_ordered_workqueue. |
| In the Linux kernel, the following vulnerability has been resolved:
resource: fix region_intersects() vs add_memory_driver_managed()
On a system with CXL memory, the resource tree (/proc/iomem) related to
CXL memory may look like something as follows.
490000000-50fffffff : CXL Window 0
490000000-50fffffff : region0
490000000-50fffffff : dax0.0
490000000-50fffffff : System RAM (kmem)
Because drivers/dax/kmem.c calls add_memory_driver_managed() during
onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL
Window X". This confuses region_intersects(), which expects all "System
RAM" resources to be at the top level of iomem_resource. This can lead to
bugs.
For example, when the following command line is executed to write some
memory in CXL memory range via /dev/mem,
$ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1
dd: error writing '/dev/mem': Bad address
1+0 records in
0+0 records out
0 bytes copied, 0.0283507 s, 0.0 kB/s
the command fails as expected. However, the error code is wrong. It
should be "Operation not permitted" instead of "Bad address". More
seriously, the /dev/mem permission checking in devmem_is_allowed() passes
incorrectly. Although the accessing is prevented later because ioremap()
isn't allowed to map system RAM, it is a potential security issue. During
command executing, the following warning is reported in the kernel log for
calling ioremap() on system RAM.
ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff
WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d
Call Trace:
memremap+0xcb/0x184
xlate_dev_mem_ptr+0x25/0x2f
write_mem+0x94/0xfb
vfs_write+0x128/0x26d
ksys_write+0xac/0xfe
do_syscall_64+0x9a/0xfd
entry_SYSCALL_64_after_hwframe+0x4b/0x53
The details of command execution process are as follows. In the above
resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a
top level resource. So, region_intersects() will report no System RAM
resources in the CXL memory region incorrectly, because it only checks the
top level resources. Consequently, devmem_is_allowed() will return 1
(allow access via /dev/mem) for CXL memory region incorrectly.
Fortunately, ioremap() doesn't allow to map System RAM and reject the
access.
So, region_intersects() needs to be fixed to work correctly with the
resource tree with "System RAM" not at top level as above. To fix it, if
we found a unmatched resource in the top level, we will continue to search
matched resources in its descendant resources. So, we will not miss any
matched resources in resource tree anymore.
In the new implementation, an example resource tree
|------------- "CXL Window 0" ------------|
|-- "System RAM" --|
will behave similar as the following fake resource tree for
region_intersects(, IORESOURCE_SYSTEM_RAM, ),
|-- "System RAM" --||-- "CXL Window 0a" --|
Where "CXL Window 0a" is part of the original "CXL Window 0" that
isn't covered by "System RAM". |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix possible null-ptr-deref in ocfs2_set_buffer_uptodate
When doing cleanup, if flags without OCFS2_BH_READAHEAD, it may trigger
NULL pointer dereference in the following ocfs2_set_buffer_uptodate() if
bh is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: adp5589-keys - fix NULL pointer dereference
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix dentry leak in cachefiles_open_file()
A dentry leak may be caused when a lookup cookie and a cull are concurrent:
P1 | P2
-----------------------------------------------------------
cachefiles_lookup_cookie
cachefiles_look_up_object
lookup_one_positive_unlocked
// get dentry
cachefiles_cull
inode->i_flags |= S_KERNEL_FILE;
cachefiles_open_file
cachefiles_mark_inode_in_use
__cachefiles_mark_inode_in_use
can_use = false
if (!(inode->i_flags & S_KERNEL_FILE))
can_use = true
return false
return false
// Returns an error but doesn't put dentry
After that the following WARNING will be triggered when the backend folder
is umounted:
==================================================================
BUG: Dentry 000000008ad87947{i=7a,n=Dx_1_1.img} still in use (1) [unmount of ext4 sda]
WARNING: CPU: 4 PID: 359261 at fs/dcache.c:1767 umount_check+0x5d/0x70
CPU: 4 PID: 359261 Comm: umount Not tainted 6.6.0-dirty #25
RIP: 0010:umount_check+0x5d/0x70
Call Trace:
<TASK>
d_walk+0xda/0x2b0
do_one_tree+0x20/0x40
shrink_dcache_for_umount+0x2c/0x90
generic_shutdown_super+0x20/0x160
kill_block_super+0x1a/0x40
ext4_kill_sb+0x22/0x40
deactivate_locked_super+0x35/0x80
cleanup_mnt+0x104/0x160
==================================================================
Whether cachefiles_open_file() returns true or false, the reference count
obtained by lookup_positive_unlocked() in cachefiles_look_up_object()
should be released.
Therefore release that reference count in cachefiles_look_up_object() to
fix the above issue and simplify the code. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/timerlat: Fix a race during cpuhp processing
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
<TASK>
? __warn+0x7c/0x110
? debug_print_object+0x7d/0xb0
? report_bug+0xf1/0x1d0
? prb_read_valid+0x17/0x20
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? debug_print_object+0x7d/0xb0
? debug_print_object+0x7d/0xb0
? __pfx_timerlat_irq+0x10/0x10
__debug_object_init+0x110/0x150
hrtimer_init+0x1d/0x60
timerlat_main+0xab/0x2d0
? __pfx_timerlat_main+0x10/0x10
kthread+0xb7/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
```
After tracing the scheduling event, it was discovered that the migration
of the "timerlat/1" thread was performed during thread creation. Further
analysis confirmed that it is because the CPU online processing for
osnoise is implemented through workers, which is asynchronous with the
offline processing. When the worker was scheduled to create a thread, the
CPU may has already been removed from the cpu_online_mask during the offline
process, resulting in the inability to select the right CPU:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
osnoise_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
To fix this, skip online processing if the CPU is already offline. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/scsi: null-ptr-dereference in vhost_scsi_get_req()
Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code
from control queue handler") a null pointer dereference bug can be
triggered when guest sends an SCSI AN request.
In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with
`&v_req.tmf.lun[1]` within a switch-case block and is then passed to
vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for
a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is
set to NULL in this branch. Later, in vhost_scsi_get_req(),
`vc->target` is dereferenced without being checked, leading to a null
pointer dereference bug. This bug can be triggered from guest.
When this bug occurs, the vhost_worker process is killed while holding
`vq->mutex` and the corresponding tpg will remain occupied
indefinitely.
Below is the KASAN report:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS
1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vhost_scsi_get_req+0x165/0x3a0
Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6
04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00
RSP: 0018:ffff888017affb50 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8
RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000
FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0
Call Trace:
<TASK>
? show_regs+0x86/0xa0
? die_addr+0x4b/0xd0
? exc_general_protection+0x163/0x260
? asm_exc_general_protection+0x27/0x30
? vhost_scsi_get_req+0x165/0x3a0
vhost_scsi_ctl_handle_vq+0x2a4/0xca0
? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10
? __switch_to+0x721/0xeb0
? __schedule+0xda5/0x5710
? __kasan_check_write+0x14/0x30
? _raw_spin_lock+0x82/0xf0
vhost_scsi_ctl_handle_kick+0x52/0x90
vhost_run_work_list+0x134/0x1b0
vhost_task_fn+0x121/0x350
...
</TASK>
---[ end trace 0000000000000000 ]---
Let's add a check in vhost_scsi_get_req.
[whitespace fixes] |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: sysfs: validate return type of _STR method
Only buffer objects are valid return values of _STR.
If something else is returned description_show() will access invalid
memory. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to check atomic_file in f2fs ioctl interfaces
Some f2fs ioctl interfaces like f2fs_ioc_set_pin_file(),
f2fs_move_file_range(), and f2fs_defragment_range() missed to
check atomic_write status, which may cause potential race issue,
fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/sgx: Fix deadlock in SGX NUMA node search
When the current node doesn't have an EPC section configured by firmware
and all other EPC sections are used up, CPU can get stuck inside the
while loop that looks for an available EPC page from remote nodes
indefinitely, leading to a soft lockup. Note how nid_of_current will
never be equal to nid in that while loop because nid_of_current is not
set in sgx_numa_mask.
Also worth mentioning is that it's perfectly fine for the firmware not
to setup an EPC section on a node. While setting up an EPC section on
each node can enhance performance, it is not a requirement for
functionality.
Rework the loop to start and end on *a* node that has SGX memory. This
avoids the deadlock looking for the current SGX-lacking node to show up
in the loop when it never will. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: fix race between timeout and normal completion
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue. |
