| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Configured cipher preference order not preserved vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.16 through 11.0.18, from 10.1.51 through 10.1.52, from 9.0.114 through 9.0.115.
Users are recommended to upgrade to version 11.0.20, 10.1.53 or 9.0.116, which fix the issue. |
| CLIENT_CERT authentication does not fail as expected for some scenarios when soft fail is disabled vulnerability in Apache Tomcat, Apache Tomcat Native.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.1.0-M7 through 10.1.52, from 9.0.83 through 9.0.115; Apache Tomcat Native: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39, from 1.3.0 through 1.3.6, from 2.0.0 through 2.0.13.
Users are recommended to upgrade to version Tomcat Native 1.3.7 or 2.0.14 and Tomcat 11.0.20, 10.1.53 and 9.0.116, which fix the issue. |
| A Dynamic-link Library Injection vulnerability in GatewayGeo MapServer for Windows version 5 allows attackers to escalate privileges via a crafted executable. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the stun-pass parameter to /cgi-bin/cstecgi.cgi. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to an Insecure Direct Object Reference in all versions up to, and including, 3.9.7. This is due to missing authentication and authorization checks in the `pay_incomplete_order()` function. The function accepts an attacker-controlled `order_id` parameter and uses it to look up order data, then writes billing fields to the order owner's profile (`$order_data->user_id`) without verifying the requester's identity or ownership. Because the Tutor nonce (`_tutor_nonce`) is exposed on public frontend pages, this makes it possible for unauthenticated attackers to overwrite the billing profile (name, email, phone, address) of any user who has an incomplete manual order, by sending a crafted POST request with a guessed or enumerated `order_id`. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device.
On MX platforms with
MPC10, MPC11, LC4800 or LC9600
line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance.
An affected configuration would be:
user@host# show configuration interfaces lo0 | display set
set interfaces lo0 unit 1 family inet filter input <filter-name>
where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI.
The issue can be observed with the CLI command:
user@device> show firewall counter filter <filter_name>
not showing any matches.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2,
* 24.4 versions before 24.4R2. |
| A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information.
A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information.
This issue affects
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S1,
* 25.2 version before 25.2R1-S2, 25.2R2;
Junos OS Evolved:
* all versions before 23.2R2-S6-EVO,
* 23.4 version before 23.4R2-S6-EVO,
* 24.2 version before 24.2R2-S4-EVO,
* 24.4 versions before 24.4R2-S1-EVO,
* 25.2 versions before 25.2R2-EVO. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the IPsec library used by kmd and iked of Juniper Networks Junos OS on SRX Series and MX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS).
If an affected device receives a specifically malformed first ISAKMP packet from the initiator, the kmd/iked process will crash and restart, which momentarily prevents new security associations (SAs) for from being established. Repeated exploitation of this vulnerability causes a complete inability to establish new VPN connections.
This issue affects Junos OS on
SRX Series and MX Series:
* all versions before 22.4R3-S9,
* 23.2 version before 23.2R2-S6,
* 23.4 version before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R1-S2, 25.2R2. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX and QFX Series devices allow an unauthenticated, adjacent attacker to cause a complete Denial of Service (DoS).
On EX4k, and QFX5k platforms configured as service-provider edge devices, if L2PT is enabled on the UNI and VSTP is enabled on NNI in VXLAN scenarios, receiving VSTP BPDUs on UNI leads to packet buffer allocation failures, resulting in the device to not pass traffic anymore until it is manually recovered with a restart.This issue affects Junos OS:
* 24.4 releases before 24.4R2,
* 25.2 releases before 25.2R1-S1, 25.2R2.
This issue does not affect Junos OS releases before 24.4R1. |
| A Missing Authentication for Critical Function vulnerability in the Flexible PIC Concentrators (FPCs) of Juniper Networks Junos OS Evolved on PTX Series allows a local, authenticated attacker with low privileges to gain direct access to FPCs installed in the device.
A local user with low privileges can gain direct access to the installed FPCs as a high privileged user, which can potentially lead to a full compromise of the affected component.
This issue affects Junos OS Evolved on PTX10004, PTX10008, PTX100016, with JNP10K-LC1201 or JNP10K-LC1202:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.2-EVO versions before 22.2R3-S4-EVO,
* 22.3-EVO versions before 22.3R3-S3-EVO,
* 22.4-EVO versions before 22.4R3-S2-EVO,
* 23.2-EVO versions before 23.2R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition.
During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart.
This issue cannot be triggered using IPv4 nor other IPv6 traffic.
This issue affects Junos OS on SRX Series:
* all versions before 21.2R3-S10,
* all versions of 21.3,
* from 21.4 before 21.4R3-S12,
* all versions of 22.1,
* from 22.2 before 22.2R3-S8,
* all versions of 22.4,
* from 22.4 before 22.4R3-S9,
* from 23.2 before 23.2R2-S6,
* from 23.4 before 23.4R2-S7,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S3,
* from 25.2 before 25.2R1-S2, 25.2R2. |
| An Execution with Unnecessary Privileges vulnerability in the User Interface (UI) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged attacker to gain root privileges, thus compromising the system.
When a configuration that allows unsigned Python op scripts is present on the device, a non-root user is able to execute malicious op scripts as a root-equivalent user, leading to privilege escalation.
This issue affects Junos OS:
* All versions before 22.4R3-S7,
* from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R1-S2, 24.2R2,
* from 24.4 before 24.4R1-S2, 24.4R2;
Junos OS Evolved:
* All versions before 22.4R3-S7-EVO,
* from 23.2 before 23.2R2-S4-EVO,
* from 23.4 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-EVO,
* from 24.4 before 24.4R1-S1-EVO, 24.4R2-EVO. |
| Smart Slider 3 Pro version 3.5.1.35 for WordPress and Joomla contains a multi-stage remote access toolkit injected through a compromised update system that allows unauthenticated attackers to execute arbitrary code and commands. Attackers can trigger pre-authentication remote shell execution via HTTP headers, establish authenticated backdoors accepting arbitrary PHP code or OS commands, create hidden administrator accounts, exfiltrate credentials and access keys, and maintain persistence through multiple injection points including must-use plugins and core file modifications. |
| Improper Encoding or Escaping of Output vulnerability in the JsonAccessLogValve component of Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.20, from 10.1.0-M1 through 10.1.53, from 9.0.40 through 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117 , which fix the issue. |
| Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor.
This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue. |
| OpenClaw before 2026.3.25 contains an improper access control vulnerability in the HTTP /sessions/:sessionKey/kill route that allows any bearer-authenticated user to invoke admin-level session termination functions without proper scope validation. Attackers can exploit this by sending authenticated requests to kill arbitrary subagent sessions via the killSubagentRunAdmin function, bypassing ownership and operator scope restrictions. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, On x86-64 platforms with SSE3 disabled Wasmtime's compilation of the f64x2.splat WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but this data is not visible to WebAssembly guests. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a bug where a 64-bit table, part of the memory64 proposal of WebAssembly, incorrectly translated the table.size instruction. This bug could lead to disclosing data on the host's stack to WebAssembly guests. The host's stack can possibly contain sensitive data related to other host-originating operations which is not intended to be disclosed to guests. This bug specifically arose from a mistake where the return value of table.size was statically typed as a 32-bit integer, as opposed to consulting the table's index type to see how large the returned register could be. When combined with details about Wnich's ABI, such as multi-value returns, this can be combined to read stack data from the host, within a guest. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
