| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access. |
| The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests. |
| IKUS Rdiffweb before 2.10.5 has an improper authorization flaw that allows an attacker with any valid or stolen access token to act as other users. The API does not enforce binding between the authenticated subject and the targeted user/tenant, so crafted requests can read or modify other users data and, in some cases, perform privileged actions. This issue may enable cross-tenant access. Fixed in version 2.10.6. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): error count since last fsck: 1
EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760
EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760
...
According to the log analysis, blocks are always requested from the
corrupted block group. This may happen as follows:
ext4_mb_find_by_goal
ext4_mb_load_buddy
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_wait_block_bitmap
ext4_validate_block_bitmap
if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
return -EFSCORRUPTED; // There's no logs.
if (err)
return err; // Will return error
ext4_lock_group(ac->ac_sb, group);
if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable
goto out;
After commit 9008a58e5dce ("ext4: make the bitmap read routines return
real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group
as corrupt on block bitmap error") is no real solution for allocating
blocks from corrupted block groups. This is because if
'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then
'ext4_mb_load_buddy()' may return an error. This means that the block
allocation will fail.
Therefore, check block group if corrupted when ext4_mb_load_buddy()
returns error. |
| WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend. |
| A security flaw has been discovered in Totolink WA300 5.2cu.7112_B20190227. The affected element is the function loginauth of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument http_host results in buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was detected in code-projects BloodBank Managing System 1.0. The impacted element is an unknown function of the file request_blood.php. The manipulation results in unrestricted upload. The attack can be executed remotely. The exploit is now public and may be used. |
| A security flaw has been discovered in puchunjie doc-tools-mcp 1.0.18. This affects the function create_document/open_document of the file src/mcp-server.ts of the component MCP Interface. The manipulation of the argument filePath results in path traversal. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in chatchat-space Langchain-Chatchat up to 0.3.1.3. Impacted is the function files of the file libs/chatchat-server/chatchat/server/api_server/openai_routes.py of the component OpenAI-Compatible File Upload API. Such manipulation of the argument file.filename leads to time-of-check time-of-use. Access to the local network is required for this attack to succeed. The attack requires a high level of complexity. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In Progress® Telerik® UI for AJAX prior to 2026.1.421, RadAsyncUpload contains an uncontrolled resource consumption vulnerability that allows file uploads to exceed the configured maximum size due to missing cumulative size enforcement during chunk reassembly, leading to disk space exhaustion. |
| In Progress® Telerik® UI for AJAX versions 2024.4.1114 through 2026.1.421, the RadFilter control is vulnerable to insecure deserialization when restoring filter state if the state is exposed to the client. If an attacker tampers with this state, a server-side remote code execution is possible. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.3.0, an elected validator proposer can send an election macro block whose header.interlink does not match the canonical next interlink. Honest validators accept that proposal in verify_macro_block_proposal() because the proposal path validates header shape, successor relation, proposer, body root, and state, but never checks the interlink binding for election blocks. The same finalized block is later rejected by verify_block() during push with InvalidInterlink. Because validators prevote and precommit the malformed header hash itself, the failure happens after Tendermint decides the block, not before voting. This issue has been patched in version 1.3.0. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.3.0, two peer-facing consensus request handlers assume that the history index is always available and call blockchain.history_store.history_index().unwrap() directly. That assumption is false by construction. HistoryStoreProxy::history_index() explicitly returns None for the valid HistoryStoreProxy::WithoutIndex state. when a full node is syncing or otherwise running without the history index, a remote peer can send RequestTransactionsProof or RequestTransactionReceiptsByAddress and trigger an Option::unwrap() panic on the request path. This issue has been patched in version 1.3.0. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.3.0, the discovery handler accepts a peer-controlled limit during handshake and stores it unchanged. The immediate HandshakeAck path then honors limit = 0 and returns zero contacts, which makes the session look benign. Later, after the same session reaches Established, the periodic update path computes self.peer_list_limit.unwrap() as usize - 1. With limit = 0, that wraps to usize::MAX and then in rand 0.9.2, choose_multiple() immediately attempts Vec::with_capacity(amount), which deterministically panics with capacity overflow. This issue has been patched in version 1.3.0. |
| PyJWT is a JSON Web Token implementation in Python. Prior to 2.12.0, PyJWT does not validate the crit (Critical) Header Parameter defined in RFC 7515 §4.1.11. When a JWS token contains a crit array listing extensions that PyJWT does not understand, the library accepts the token instead of rejecting it. This violates the MUST requirement in the RFC. This vulnerability is fixed in 2.12.0. |
| Missing input validation in the MP_REACH_NLRI component of FRRouting (FRR) stable/10.0 to stable/10.6 allows authenticated attackers to cause a Denial of Service (DoS) via supplying a crafted UPDATE message. |
| arduino-esp32 is an Arduino core for the ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP32-H2 microcontrollers. Prior to 3.3.8, there is a remotely reachable memory corruption issue in the NBNS packet handling path. When NetBIOS is enabled by calling NBNS.begin(...), the device listens on UDP port 137 and processes untrusted NBNS requests from the local network.
The request parser trusts the attacker-controlled name_len field without enforcing a bound consistent with the fixed-size destination buffers used later in the flow. This vulnerability is fixed in 3.3.8. |
| Improper Certificate Validation via Global SSL Context Downgrade in Apache Storm Prometheus Reporter
Versions Affected: from 2.6.3 to 2.8.6
Description:
In production deployments where an administrator enables storm.daemon.metrics.reporter.plugin.prometheus.skip_tls_validation (by default it is disabled) intending to affect only the Prometheus reporter, the undocumented global side effect creates an attack surface across every TLS-protected communication channel in the Storm daemon.
The PrometheusPreparableReporter class implements an INSECURE_TRUST_MANAGER that accepts all SSL certificates without validation, with empty checkClientTrusted and checkServerTrusted methods. Most critically, when the storm.daemon.metrics.reporter.plugin.prometheus.skip_tls_validation configuration option is enabled (default = disabled) for HTTPS Prometheus PushGateway connections, the INSECURE_CONNECTION_FACTORY calls SSLContext.setDefault(sslContext), which globally replaces the JVM's default SSL context rather than applying the insecure context only to the Prometheus connection. This payload flows through storm.yaml configuration → PrometheusPreparableReporter.prepare() → INSECURE_CONNECTION_FACTORY → SSLContext.setDefault(), resulting in a JVM-wide TLS security downgrade. All subsequent HTTPS connections in the process - including ZooKeeper, Thrift, Netty, and UI connections - silently trust all certificates, including self-signed, expired, and attacker-generated ones, enabling man-in-the-middle interception of cluster state, topology submissions, tuple data, and administrative credentials.
Mitigation: 2.x users should upgrade to 2.8.7 if the Prometheus Metrics Reporter is used. Prometheus Metrics Reporter Users who cannot upgrade immediately should remove the storm.daemon.metrics.reporter.plugin.prometheus.skip_tls_validation: true setting from their storm.yaml configuration and instead configure a proper truststore containing the PushGateway's certificate. |
| A vulnerability was found in CodeAstro Online Classroom 1.0. This affects an unknown function of the file /OnlineClassroom/addnewstudent. The manipulation of the argument fname results in sql injection. The attack may be performed from remote. The exploit has been made public and could be used. |
| Synway SMG Gateway Management Software contains an OS command injection vulnerability in the RADIUS configuration endpoint at /en/9-2radius.php where the radius_address POST parameter is split and interpolated directly into a sed command without sanitization. An unauthenticated remote attacker can inject arbitrary shell commands by submitting a POST request with crafted radius_address, radius_address2, shared_secret2, source_ip, timeout, or retry parameters along with save=1 and enable_radius=1 to achieve remote code execution. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-11 (UTC). |
